nrfconnect · rlubos · Oct 12, 2023 · Jul 5, 2023
@@ -240,7 +240,7 @@ You can hardcode the information in the application, or you can use a functional
 Samples and applications implementing FOTA
 ------------------------------------------
 
-* :ref:`http_full_modem_update_sample` sample - performs a full firmware OTA update of the modem.
+* :ref:`http_modem_full_update_sample` sample - performs a full firmware OTA update of the modem.
 * :ref:`http_modem_delta_update_sample` sample - performs a delta OTA update of the modem firmware.
 * :ref:`http_application_update_sample` sample - performs a basic application FOTA update.
 * :ref:`aws_iot` sample - performs a FOTA update using MQTT and HTTP, where the firmware download is triggered through an AWS IoT job.

@@ -63,7 +63,7 @@ nRF9160
 
   * :ref:`asset_tracker_v2` application, which is a low-power asset tracking example for nRF9160 DK and Thingy:91.
   * :ref:`fmfu_smp_svr_sample` sample, which shows how to add the full modem serial update functionality to an application using SMP Server.
-  * :ref:`http_full_modem_update_sample` sample, which demonstrates how to add full modem upgrade support to an application. Note that this requires an external flash memory of a minimum of 2 MB to work, hence the sample will only work on the nRF9160 DK v0.14.0 or later.
+  * :ref:`http_modem_full_update_sample` sample, which demonstrates how to add full modem upgrade support to an application. Note that this requires an external flash memory of a minimum of 2 MB to work, hence the sample will only work on the nRF9160 DK v0.14.0 or later.
   * :ref:`http_modem_delta_update_sample` sample, which demonstrates how to add delta modem upgrade support to an application.
   * :ref:`lib_fmfu_mgmt`, which is a new library that implements parts of the mcumgr management protocol for doing full modem serial updates.
 

@@ -566,7 +566,7 @@ In addition to documentation related to the changes listed above, the following
 
     * nRF9160 samples:
 
-      * :ref:`http_full_modem_update_sample` - Updated with the description of its customization options for firmware files.
+      * :ref:`http_modem_full_update_sample` - Updated with the description of its customization options for firmware files.
 
     * :ref:`zigbee_samples`:
 

@@ -543,7 +543,7 @@ Multicore samples
 nRF9160 samples
 ---------------
 
-* :ref:`http_full_modem_update_sample` sample:
+* :ref:`http_modem_full_update_sample` sample:
 
   * The sample now uses modem firmware versions 1.3.3 and 1.3.4.
   * Enabled external flash in the nRF9160 DK devicetree overlays for v0.14.0 or later versions, as it is now disabled in the Zephyr board definition.

@@ -426,7 +426,7 @@ Cellular samples (renamed from nRF9160 samples)
 
   * Updated credentials for the HTTPS connection.
 
-* :ref:`http_full_modem_update_sample` sample:
+* :ref:`http_modem_full_update_sample` sample:
 
   * Updated credentials for the HTTPS connection.
 

@@ -11,6 +11,4 @@ project(application_update)
 
 # NORDIC SDK APP START
 target_sources(app PRIVATE src/main.c)
-target_sources(app PRIVATE ../common/src/update.c)
-target_include_directories(app PRIVATE ../common/include)
 # NORDIC SDK APP END
@@ -13,7 +13,7 @@ It uses the :ref:`lib_fota_download` library to download two image files from a
 Requirements
 ************
 
-The sample supports the following development kit:
+The sample supports the following development kits:
 
 .. table-from-sample-yaml::
 
@@ -111,7 +111,7 @@ After programming the sample to your development kit, test it by performing the
    Remember to rename the file to match the ``CONFIG_DOWNLOAD_FILE_V1`` configuration option.
 #. Configure the application image version to be 2 and rebuild the application.
 #. Upload the file :file:`app_update.bin` with the application image version 2 to the server you have chosen.
-#. Reset your nRF9160 DK to start the application.
+#. Reset your nRF91 Series DK to start the application.
 #. Open a terminal emulator and observe that an output similar to the following is printed:
 
    .. code-block::
@@ -120,9 +120,9 @@ After programming the sample to your development kit, test it by performing the
 
 #. Observe that **LED 1** is lit.
    This indicates that version 1 of the application is running.
-#. Press **Button 1** on the nRF9160 DK or type "download" in the terminal emulator to start the download process, and wait until ``Download complete`` is printed in the terminal.
-#. Press the **RESET** button on the kit or type "reset" in the terminal emulator.
-   MCUboot will now detect the downloaded image and program it to flash memory.
+#. Press **Button 1** on the nRF91 Series DK or type "download" in the terminal emulator to start the download process, and wait until ``Download complete`` is printed in the terminal.
+#. Press **Button 1** on the nRF91 Series DK or type "apply" in the terminal emulator to reboot and apply the update.
+   MCUboot now detects the downloaded image and program it to flash memory.
    This can take up to a minute.
    Nothing is printed in the terminal while the writing is in progress.
 #. Observe that **LED 1** and **LED 2** are lit.

@@ -5,12 +5,14 @@ tests:
     build_only: true
     integration_platforms:
       - nrf9160dk_nrf9160_ns
-    platform_allow: nrf9160dk_nrf9160_ns
+      - nrf9161dk_nrf9161_ns
+    platform_allow: nrf9160dk_nrf9160_ns nrf9161dk_nrf9161_ns
     tags: ci_build
   sample.cellular.http_update.application_update.lwm2m_carrier:
     build_only: true
     extra_args: OVERLAY_CONFIG=overlay-carrier.conf
-    platform_allow: nrf9160dk_nrf9160_ns
     integration_platforms:
       - nrf9160dk_nrf9160_ns
+      - nrf9161dk_nrf9161_ns
+    platform_allow: nrf9160dk_nrf9160_ns nrf9161dk_nrf9161_ns
     tags: ci_build