[Keyboard] Add Nuphy Gem80 keyboard

keyboards/nuphy/gem80/ansi/ansi.h

@@ -0,0 +1,189 @@
+// Copyright 2023 Persama (@Persama)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+#include "quantum.h"
+
+
+#define MAC_PRT                 G(S(KC_3))
+#define MAC_PRTA                G(S(KC_4))
+#define WIN_PRTA                G(S(KC_S))
+
+#define RF_IDLE                 0
+#define RF_PAIRING              1
+#define RF_LINKING              2
+#define RF_CONNECT              3
+#define RF_DISCONNECT           4
+#define RF_SLEEP                5
+#define RF_SNIF                 6
+#define RF_INVAILD              0XFE
+#define RF_ERR_STATE            0XFF
+
+#define CMD_POWER_UP            0XF0
+#define CMD_SLEEP               0XF1
+#define CMD_HAND                0XF2
+#define CMD_SNIF                0XF3
+#define CMD_24G_SUSPEND         0XF4
+#define CMD_IDLE_EXIT           0XFE
+
+#define CMD_RPT_MS              0XE0
+#define CMD_RPT_BYTE_KB         0XE1
+#define CMD_RPT_BIT_KB          0XE2
+#define CMD_RPT_CONSUME         0XE3
+#define CMD_RPT_SYS             0XE4
+
+#define CMD_SET_LINK            0XC0
+#define CMD_SET_CONFIG          0XC1
+#define CMD_GET_CONFIG          0XC2
+#define CMD_SET_NAME            0XC3
+#define CMD_GET_NAME            0XC4
+#define CMD_CLR_DEVICE          0XC5
+#define CMD_NEW_ADV             0XC7
+#define CMD_RF_STS_SYSC         0XC9
+#define CMD_SET_24G_NAME        0XCA
+#define CMD_GO_TEST             0XCF
+#define CMD_RF_DFU              0XB1
+
+#define CMD_WRITE_DATA          0X80
+#define CMD_READ_DATA           0X81
+
+#define LINK_RF_24              0
+#define LINK_BT_1               1
+#define LINK_BT_2               2
+#define LINK_BT_3               3
+#define LINK_USB                4
+
+#define UART_HEAD               0x5A
+#define FUNC_VALID_LEN          32
+#define UART_MAX_LEN            64
+
+#define SYS_SW_WIN              0xa1
+#define SYS_SW_MAC              0xa2
+
+#define RF_LINK_SHOW_TIME       300
+
+#define HOST_USB_TYPE           0
+#define HOST_BLE_TYPE           1
+#define HOST_RF_TYPE            2
+
+#define LINK_TIMEOUT            (100 * 120)
+#define SLEEP_TIME_DELAY        (100 * 360)
+#define POWER_DOWN_DELAY        (24)
+
+#define RF_LONG_PRESS_DELAY     30
+#define DEV_RESET_PRESS_DELAY   30
+
+enum custom_keycodes {
+    RF_DFU = QK_KB_0,
+    LNK_USB,
+    LNK_RF,
+    LNK_BLE1,
+    LNK_BLE2,
+    LNK_BLE3,
+
+    MAC_TASK,      
+    MAC_SEARCH,    
+    MAC_VOICE,
+    MAC_CONSOLE,    
+    MAC_DND,
+
+    WIN_LOCK,
+    DEV_RESET,
+    SLEEP_MODE,
+    BAT_SHOW,
+    RGB_TEST,
+    SHIFT_GRV,
+
+    SIDE_VAI,
+    SIDE_VAD,
+    SIDE_MOD,
+    SIDE_HUI,
+    SIDE_SPI,
+    SIDE_SPD,
+
+    LOGO_VAI,
+    LOGO_VAD,
+    LOGO_MOD,
+    LOGO_HUI,
+    LOGO_SPI,
+    LOGO_SPD
+};
+
+
+typedef enum {
+    RX_Idle,
+    RX_Receiving,
+    RX_Done,
+    RX_Fail,
+    RX_OV_ERR,
+    RX_SUM_ERR,
+    RX_CMD_ERR,
+    RX_DATA_ERR,
+    RX_DATA_OV,
+    RX_FORMAT_ERR,
+
+    TX_OK = 0XE0,
+    TX_DONE,
+    TX_BUSY,
+    TX_TIMEOUT,
+    TX_DATA_ERR,
+
+} TYPE_RX_STATE;
+
+typedef struct
+{
+    uint8_t RXDState;
+    uint8_t RXDLen;
+    uint8_t RXDOverTime;
+    uint8_t TXDLenBack;
+    uint8_t TXDOffset;
+    uint8_t TXDBuf[UART_MAX_LEN];
+    uint8_t RXDBuf[UART_MAX_LEN];
+} USART_MGR_STRUCT;
+
+typedef struct
+{
+    uint8_t link_mode;
+    uint8_t rf_channel;
+    uint8_t ble_channel;
+    uint8_t rf_state;
+    uint8_t rf_charge;
+    uint8_t rf_led;
+    uint8_t rf_baterry;
+    uint8_t sys_sw_state;
+} DEV_INFO_STRUCT;
+
+
+typedef struct
+{
+    uint8_t bit0: 1;
+    uint8_t bit1: 1;
+    uint8_t bit2: 1;
+    uint8_t bit3: 1;
+    uint8_t bit4: 1;
+    uint8_t bit5: 1;
+    uint8_t bit6: 1;
+    uint8_t bit7: 1;
+}m_8bit;
+
+
+typedef struct
+{
+    uint8_t default_brightness_flag;
+    uint8_t ee_side_mode;
+    uint8_t ee_side_light;
+    uint8_t ee_side_speed;
+    uint8_t ee_side_rgb;
+    uint8_t ee_side_colour;
+    uint8_t ee_logo_mode;
+    uint8_t ee_logo_light;
+    uint8_t ee_logo_speed;
+    uint8_t ee_logo_rgb;
+    uint8_t ee_logo_colour;
+    m_8bit ee_dev_config;
+} user_config_t;
+
+
+
+extern user_config_t user_config;
+#define f_dev_sleep_enable  user_config.ee_dev_config.bit0

keyboards/nuphy/gem80/ansi/config.h

@@ -0,0 +1,35 @@
+
+#pragma once
+
+#define USB_MODE                    0
+#define THREE_MODE                  1
+#define WORK_MODE                   THREE_MODE
+#define TAP_CODE_DELAY              8
+#define DYNAMIC_KEYMAP_MACRO_DELAY  8
+#define EECONFIG_USER_DATA_SIZE  	12
+#define DEV_MODE_PIN             	C0
+#define SYS_MODE_PIN            	C1
+#define DC_BOOST_PIN             	C2
+#define NRF_RESET_PIN            	B4
+#define NRF_BOOT_PIN             	B5
+#define NRF_WAKEUP_PIN           	B8
+#define WS2812_PWM_DRIVER       	PWMD3
+#define WS2812_PWM_CHANNEL      	2
+#define WS2812_PWM_PAL_MODE     	1
+#define WS2812_DMA_STREAM       	STM32_DMA1_STREAM3
+#define WS2812_DMA_CHANNEL      	3
+#define WS2812_PWM_TARGET_PERIOD    800000
+#define DRIVER_RGB_DI_PIN        	A7
+#define DRIVER_LED_CS_PIN        	C6
+#define DRIVER_SIDE_PIN          	C8
+#define DRIVER_SIDE_CS_PIN       	C9
+#define SERIAL_DRIVER            	SD1
+#define SD1_TX_PIN               	B6
+#define SD1_TX_PAL_MODE          	0
+#define SD1_RX_PIN               	B7
+#define SD1_RX_PAL_MODE          	0
+#define RGB_MATRIX_DEFAULT_MODE     RGB_MATRIX_CUSTOM_position_mode
+#define RGB_DEFAULT_COLOUR          168
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
+
+

keyboards/nuphy/gem80/ansi/halconf.h

@@ -0,0 +1,9 @@
+#pragma once
+
+#include_next <halconf.h>
+
+#undef HAL_USE_PWM
+#define HAL_USE_PWM TRUE
+
+#undef HAL_USE_SERIAL
+#define HAL_USE_SERIAL TRUE