Apply MCUXpresso SDK 2.15.000 MCUXA15X release update

The release update is from the MCUXpresso SDK 2.15.000 release for MCXA15X, support board FRDM-MCXA156

boards/frdmmcxa156/board.c

@@ -0,0 +1,94 @@
+/*
+ * Copyright 2024 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+#include "fsl_common.h"
+#include "fsl_debug_console.h"
+#include "board.h"
+#if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
+#include "fsl_lpi2c.h"
+#endif /* SDK_I2C_BASED_COMPONENT_USED */
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Code
+ ******************************************************************************/
+
+/* Initialize debug console. */
+void BOARD_InitDebugConsole(void)
+{
+ /* attach 12 MHz clock to FLEXCOMM0 (debug console) */
+ CLOCK_SetClockDiv(kCLOCK_DivLPUART0, 1u);
+ CLOCK_AttachClk(BOARD_DEBUG_UART_CLK_ATTACH);
+
+ RESET_PeripheralReset(BOARD_DEBUG_UART_RST);
+
+ DbgConsole_Init(BOARD_DEBUG_UART_INSTANCE, BOARD_DEBUG_UART_BAUDRATE, BOARD_DEBUG_UART_TYPE,
+ BOARD_DEBUG_UART_CLK_FREQ);
+}
+
+#if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
+void BOARD_LPI2C_Init(LPI2C_Type *base, uint32_t clkSrc_Hz)
+{
+ lpi2c_master_config_t lpi2cConfig = {0};
+
+ /*
+ * lpi2cConfig.debugEnable = false;
+ * lpi2cConfig.ignoreAck = false;
+ * lpi2cConfig.pinConfig = kLPI2C_2PinOpenDrain;
+ * lpi2cConfig.baudRate_Hz = 100000U;
+ * lpi2cConfig.busIdleTimeout_ns = 0;
+ * lpi2cConfig.pinLowTimeout_ns = 0;
+ * lpi2cConfig.sdaGlitchFilterWidth_ns = 0;
+ * lpi2cConfig.sclGlitchFilterWidth_ns = 0;
+ */
+ LPI2C_MasterGetDefaultConfig(&lpi2cConfig);
+ LPI2C_MasterInit(base, &lpi2cConfig, clkSrc_Hz);
+}
+
+status_t BOARD_LPI2C_Send(LPI2C_Type *base,
+ uint8_t deviceAddress,
+ uint32_t subAddress,
+ uint8_t subAddressSize,
+ uint8_t *txBuff,
+ uint8_t txBuffSize)
+{
+ lpi2c_master_transfer_t xfer;
+
+ xfer.flags = kLPI2C_TransferDefaultFlag;
+ xfer.slaveAddress = deviceAddress;
+ xfer.direction = kLPI2C_Write;
+ xfer.subaddress = subAddress;
+ xfer.subaddressSize = subAddressSize;
+ xfer.data = txBuff;
+ xfer.dataSize = txBuffSize;
+
+ return LPI2C_MasterTransferBlocking(base, &xfer);
+}
+
+status_t BOARD_LPI2C_Receive(LPI2C_Type *base,
+ uint8_t deviceAddress,
+ uint32_t subAddress,
+ uint8_t subAddressSize,
+ uint8_t *rxBuff,
+ uint8_t rxBuffSize)
+{
+ lpi2c_master_transfer_t xfer;
+
+ xfer.flags = kLPI2C_TransferDefaultFlag;
+ xfer.slaveAddress = deviceAddress;
+ xfer.direction = kLPI2C_Read;
+ xfer.subaddress = subAddress;
+ xfer.subaddressSize = subAddressSize;
+ xfer.data = rxBuff;
+ xfer.dataSize = rxBuffSize;
+
+ return LPI2C_MasterTransferBlocking(base, &xfer);
+}
+#endif /* SDK_I2C_BASED_COMPONENT_USED */

boards/frdmmcxa156/board.h

@@ -0,0 +1,136 @@
+/*
+ * Copyright 2024 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#include "clock_config.h"
+#include "fsl_gpio.h"
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+/*! @brief The board name */
+#define BOARD_NAME "FRDM-MCXA156"
+/*! @brief The manufacturer name */
+#define MANUFACTURER_NAME "NXP"
+
+/*! @brief The UART to use for debug messages. */
+#define BOARD_DEBUG_UART_TYPE kSerialPort_Uart
+#define BOARD_DEBUG_UART_CLK_FREQ 12000000U
+
+#ifndef BOARD_DEBUG_UART_BAUDRATE
+#define BOARD_DEBUG_UART_BAUDRATE 115200U
+#endif
+
+#define BOARD_DEBUG_UART_BASEADDR (uint32_t) LPUART0
+#define BOARD_DEBUG_UART_INSTANCE 0U
+#define BOARD_DEBUG_UART_CLK_ATTACH kFRO12M_to_LPUART0
+#define BOARD_DEBUG_UART_RST kLPUART0_RST_SHIFT_RSTn
+#define BOARD_DEBUG_UART_CLKSRC kCLOCK_LPUART0
+#define BOARD_UART_IRQ_HANDLER LPUART0_IRQHandler
+#define BOARD_UART_IRQ LPUART0_IRQn
+
+/*! @brief GPIO for LED. */
+#ifndef BOARD_LED_RED_GPIO
+#define BOARD_LED_RED_GPIO GPIO3
+#endif
+#ifndef BOARD_LED_RED_GPIO_PIN
+#define BOARD_LED_RED_GPIO_PIN 12U
+#endif
+
+#ifndef BOARD_LED_GREEN_GPIO
+#define BOARD_LED_GREEN_GPIO GPIO3
+#endif
+#ifndef BOARD_LED_GREEN_GPIO_PIN
+#define BOARD_LED_GREEN_GPIO_PIN 13U
+#endif
+
+#ifndef BOARD_LED_BLUE_GPIO
+#define BOARD_LED_BLUE_GPIO GPIO3
+#endif
+#ifndef BOARD_LED_BLUE_GPIO_PIN
+#define BOARD_LED_BLUE_GPIO_PIN 0U
+#endif
+
+/*! @brief GPIO for SW. */
+#ifndef BOARD_SW2_GPIO
+#define BOARD_SW2_GPIO GPIO1
+#endif
+#ifndef BOARD_SW2_GPIO_PIN
+#define BOARD_SW2_GPIO_PIN 7U
+#endif
+#define BOARD_SW2_NAME "SW2"
+#define BOARD_SW2_IRQ GPIO1_IRQn
+#define BOARD_SW2_IRQ_HANDLER GPIO1_IRQHandler
+
+#ifndef BOARD_SW3_GPIO
+#define BOARD_SW3_GPIO GPIO0
+#endif
+#ifndef BOARD_SW3_GPIO_PIN
+#define BOARD_SW3_GPIO_PIN 6U
+#endif
+#define BOARD_SW3_NAME "SW3"
+#define BOARD_SW3_IRQ GPIO0_IRQn
+#define BOARD_SW3_IRQ_HANDLER GPIO0_IRQHandler
+
+/* Board LED color mapping */
+#define LOGIC_LED_ON 0U
+#define LOGIC_LED_OFF 1U
+
+#define LED_RED_INIT(output) \
+ GPIO_PinWrite(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PIN, output); \
+ BOARD_LED_RED_GPIO->PDDR |= (1U << BOARD_LED_RED_GPIO_PIN) /*!< Enable target LED_RED */
+#define LED_RED_ON() \
+ GPIO_PinWrite(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PIN, LOGIC_LED_ON) /*!< Turn on target LED_RED */
+#define LED_RED_OFF() \
+ GPIO_PinWrite(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PIN, LOGIC_LED_OFF) /*!< Turn off target LED_RED */
+#define LED_RED_TOGGLE() \
+ GPIO_PortToggle(BOARD_LED_RED_GPIO, 1U << BOARD_LED_RED_GPIO_PIN) /*!< Toggle on target LED_RED */
+
+#define LED_GREEN_INIT(output) \
+ GPIO_PinWrite(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PIN, output); \
+ BOARD_LED_GREEN_GPIO->PDDR |= (1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Enable target LED_GREEN */
+#define LED_GREEN_ON() \
+ GPIO_PinWrite(BOARD_LED_RED_GPIO, BOARD_LED_GREEN_GPIO_PIN, LOGIC_LED_ON) /*!< Turn on target LED_GREEN */
+#define LED_GREEN_OFF() \
+ GPIO_PinWrite(BOARD_LED_RED_GPIO, BOARD_LED_GREEN_GPIO_PIN, LOGIC_LED_OFF) /*!< Turn off target LED_GREEN */
+#define LED_GREEN_TOGGLE() \
+ GPIO_PortToggle(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Toggle on target LED_GREEN */
+
+#define LED_BLUE_INIT(output) \
+ GPIO_PinWrite(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PIN, output); \
+ BOARD_LED_BLUE_GPIO->PDDR |= (1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Enable target LED_BLUE */
+#define LED_BLUE_ON() \
+ GPIO_PinWrite(BOARD_LED_RED_GPIO, BOARD_LED_BLUE_GPIO_PIN, LOGIC_LED_ON) /*!< Turn on target LED_BLUE */
+#define LED_BLUE_OFF() \
+ GPIO_PinWrite(BOARD_LED_RED_GPIO, BOARD_LED_BLUE_GPIO_PIN, LOGIC_LED_OFF) /*!< Turn off target LED_BLUE */
+#define LED_BLUE_TOGGLE() \
+ GPIO_PortToggle(BOARD_LED_BLUE_GPIO, 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Toggle on target LED_BLUE */
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+void BOARD_InitDebugConsole(void);
+
+#if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
+void BOARD_LPI2C_Init(LPI2C_Type *base, uint32_t clkSrc_Hz);
+status_t BOARD_LPI2C_Send(LPI2C_Type *base,
+ uint8_t deviceAddress,
+ uint32_t subAddress,
+ uint8_t subaddressSize,
+ uint8_t *txBuff,
+ uint8_t txBuffSize);
+status_t BOARD_LPI2C_Receive(LPI2C_Type *base,
+ uint8_t deviceAddress,
+ uint32_t subAddress,
+ uint8_t subaddressSize,
+ uint8_t *rxBuff,
+ uint8_t rxBuffSize);
+#endif /* SDK_I2C_BASED_COMPONENT_USED */
+
+#endif /* _BOARD_H_ */