RSCT Operator

The RSCT Operator enables RSCT on a cluster.

• Deploying the RSCT Operator
  • Installing the RSCT Operator
  • Create RSCT resource
  • Check that the Operator is Running
  • Removing the RSCT Operator

Installing the RSCT Operator

Run the following command to deploy the RSCT Operator:

oc create -k "https://github.com/ocp-power-automation/rsct-operator/config/default/?ref=main"

Create RSCT resource

1. Create the cluster role binding and RSCT resources

   oc create -k "https://github.com/ocp-power-automation/rsct-operator/config/samples/?ref=main"

Check that the Operator is Running

Check that the pods have been created and are running

oc get pods -n rsct-operator-system

A readiness probe will check that each pod is running, which can take up to 10 minutes.

Output should be similar to the following

NAME                                                READY   STATUS    RESTARTS   AGE
rsct-6tbjw                                          1/1     Running   0          7s
rsct-fr8tv                                          1/1     Running   0          7s
rsct-h4lts                                          1/1     Running   0          7s
rsct-mxwgt                                          1/1     Running   0          7s
rsct-operator-controller-manager-5d4c458d86-xln94   2/2     Running   0          62s
rsct-rgvlm                                          1/1     Running   0          7s

Removing the RSCT Operator

Run the following command to remove the RSCT Operator:

1. Remove the cluster role binding and RSCT resources

oc delete -k "https://github.com/ocp-power-automation/rsct-operator/config/samples/?ref=main"

2. Remove the RSCT Operator:

oc delete -k "https://github.com/ocp-power-automation/rsct-operator/config/default/?ref=main"