chartmogul-python provides convenient Python bindings for ChartMogul's API.
Installation | Configuration | Usage | Development | Contributing | License
This library requires Python 3.5 to 3.9. It was last tested against Python 2.7 in version 1.3.0.
pip3 install chartmogulFirst create a Config object by passing your API key, available from the administration section of your ChartMogul account.
You need to pass this configuration object as the first argument to each request.
import chartmogul
config = chartmogul.Config('api_key')Alternatively, you can use the library without the module prefix:
from chartmogul import *
config = Config('api_key')Note that both ways should import all necessary classes and submodules, but the first one is preferred due to being explicit.
To test authentication, try ping endpoint:
import chartmogul
chartmogul.Ping.ping(config).get()This throws error or returns <Ping{data='pong!'}>
You can also pass to the Config initializer:
request_timeout=sets timeout for requests (seconds), default: none (see requests docs for details)
The library will keep retrying if the request exceeds the rate limit or if there's any network related error. By default, the request will be retried for 20 times (approximately 15 minutes) before finally giving up.
You can change the retry count from the Config initializer:
max_retries=sets the maximum number of retries for failed requests, default: 20backoff_factor=sets the exponential backoff factor, default: 2
Set max_retries 0 to disable it. Set backoff_factor 0 to disable it.
The library is based on promises (mechanism similar to futures).
Every call therefore returns an object like <promise.promise.Promise object at 0x123456789>
The requests are running asynchronously, but you can use them synchronously, just appending .get(),
which will block your program until the response has come.
Both sync/async ways will return/pass native Python objects mapping to the entities in the API,
or raise/pass errors from the API, see an example:
import chartmogul
config = chartmogul.Config('api_key')
req = chartmogul.Plan.create(config, data={'name': 'Awesome plan'...})
# Now either asynchronous reaction:
req.then(lambda plan: print(plan)).catch(reactOnException)
# or synchronous:
try:
print(req.get())
except Exception as ex:
reactOnException(ex)Available methods in Import API:
chartmogul.DataSource.create(config, data={'name': 'In-house billing'})
chartmogul.DataSource.retrieve(config, uuid='ds_5915ee5a-babd-406b-b8ce-d207133fb4cb')
chartmogul.DataSource.all(config)
chartmogul.DataSource.destroy(config, uuid='ds_5915ee5a-babd-406b-b8ce-d207133fb4cb')chartmogul.Customer.create(config, data={})
chartmogul.Customer.all(config, page=2, per_page=20)
chartmogul.Customer.retrieve(config, uuid='cus_5915ee5a-babd-406b-b8ce-d207133fb4cb')
chartmogul.Customer.search(config, email='email@email.com')
chartmogul.Customer.merge(config, data={
'from': {'customer_uuid': 'cus_5915ee5a-babd-406b-b8ce-d207133fb4cb'},
'into': {'customer_uuid': 'cus_2123290f-09c8-4628-a205-db5596bd58f7'}
})
chartmogul.Customer.modify(config, uuid='cus_5915ee5a-babd-406b-b8ce-d207133fb4cb', data={
"city": "San Francisco",
"country": "US",
"state": "CA",
})
chartmogul.Customer.destroy(config, uuid='cus_5915ee5a-babd-406b-b8ce-d207133fb4cb')
chartmogul.Customer.connectSubscriptions(config, uuid='cus_5915ee5a-babd-406b-b8ce-d207133fb4cb', data={
'subscriptions': [
{
"data_source_uuid": "ds_ade45e52-47a4-231a-1ed2-eb6b9e541213",
"external_id": "d1c0c885-add0-48db-8fa9-0bdf5017d6b0"
},
{
"data_source_uuid": "ds_ade45e52-47a4-231a-1ed2-eb6b9e541213",
"external_id": "9db5f4a1-1695-44c0-8bd4-de7ce4d0f1d4"
}
]
})
chartmogul.Customer.contacts(config, uuid='cus_5915ee5a-babd-406b-b8ce-d207133fb4cb', cursor='aabbcc', per_page=20)
chartmogul.Customer.createContact(config, uuid='cus_5915ee5a-babd-406b-b8ce-d207133fb4cb', data={})chartmogul.Contact.create(config, data={})
chartmogul.Contact.all(config, cursor='aabbcc', per_page=20)
chartmogul.Contact.retrieve(config, uuid='con_5915ee5a-babd-406b-b8ce-d207133fb4cb')
chartmogul.Contact.merge(config, into_uuid='con_5915ee5a-babd-406b-b8ce-d207133fb4cb', from_uuid='con_2123290f-09c8-4628-a205-db5596bd58f7')
chartmogul.Contact.modify(config, uuid='con_5915ee5a-babd-406b-b8ce-d207133fb4cb', data={
"email": "test@example.com"
})
chartmogul.Contact.destroy(config, uuid='con_5915ee5a-babd-406b-b8ce-d207133fb4cb')Note that the returned attributes of type date are not parsed and stay in string.
chartmogul.Attributes.retrieve(config, uuid='cus_5915ee5a-babd-406b-b8ce-d207133fb4cb')chartmogul.Tags.add(config, uuid='cus_5915ee5a-babd-406b-b8ce-d207133fb4cb', data={
'tags': ['important', 'Prio1']
})
chartmogul.Tags.add(config, data={
'email': 'adam@smith.com',
'tags': ['important', 'Prio1']
})
chartmogul.Tags.remove(config, uuid='cus_5915ee5a-babd-406b-b8ce-d207133fb4cb', data={
'tags': ['important', 'Prio1']
})chartmogul.CustomAttributes.add(config, uuid='cus_5915ee5a-babd-406b-b8ce-d207133fb4cb', data={
'custom': [
{'type': 'Integer', 'key': 'age', 'value': 8}
]
})
chartmogul.CustomAttributes.add(config, data={
'email': 'adam@smith.com',
'custom': [
{'type': 'Integer', 'key': 'age', 'value': 8}
]
})
chartmogul.CustomAttributes.update(config, uuid='cus_5915ee5a-babd-406b-b8ce-d207133fb4cb', data={
'custom': {
'age': 20,
'channel': 'Twitter'
}
});
chartmogul.CustomAttributes.remove(config, uuid='cus_5915ee5a-babd-406b-b8ce-d207133fb4cb', data={
'custom': ['CAC']
})chartmogul.Plan.create(config, data={})
chartmogul.Plan.retrieve(config, uuid='cus_5915ee5a-babd-406b-b8ce-d207133fb4cb')
chartmogul.Plan.modify(config, uuid='cus_5915ee5a-babd-406b-b8ce-d207133fb4cb', data={
'name': 'new name'
})
chartmogul.Plan.all(config, page=2, external_id='')
chartmogul.Plan.destroy(config, uuid='')chartmogul.PlanGroup.create(config, data={})
chartmogul.PlanGroup.retrieve(config, uuid='plg_5915ee5a-babd-406b-b8ce-d207133fb4cb')
chartmogul.PlanGroup.modify(config, uuid='plg_5915ee5a-babd-406b-b8ce-d207133fb4cb', data={})
chartmogul.PlanGroup.all(config, page=2)
chartmogul.PlanGroup.all(config, uuid='plg_5915ee5a-babd-406b-b8ce-d207133fb4cb')
chartmogul.PlanGroup.destroy(config, uuid='')import chartmogul
chartmogul.Invoice.create(config, uuid='cus_5915ee5a-babd-406b-b8ce-d207133fb4cb', data={})
chartmogul.Invoice.all(config, uuid='cus_5915ee5a-babd-406b-b8ce-d207133fb4cb', page=2, per_page=10)
chartmogul.Invoice.all(config, customer_uuid='cus_f466e33d-ff2b-4a11-8f85-417eb02157a7', external_id='INV0001')
chartmogul.Invoice.retrieve(config, uuid='inv_22910fc6-c931-48e7-ac12-90d2cb5f0059')import chartmogul
chartmogul.Transaction.create(config, uuid='inv_745df1d4-819f-48ee-873d-b5204801e021', data={})import chartmogul
chartmogul.SubscriptionEvent.all(config)
chartmogul.SubscriptionEvent.create(config, data={
'subscription_event' : {
'external_id' : 'evnt_026',
'customer_external_id' : 'scus_022',
'data_source_uuid' : 'ds_1fm3eaac-62d0-31ec-clf4-4bf0mbe81aba',
'event_type' : 'subscription_start_scheduled',
'event_date' : '2022-03-30',
'effective_date' : '2022-04-01',
'subscription_external_id' : 'sub_0001',
'plan_external_id' : 'gol d_monthly',
'currency' : 'USD',
'amount_in_cents' : 1000,
'quantity': 1
}})
chartmogul.SubscriptionEvent.modify_with_params(config, data={
'subscription_event' : {
'id' : 73966836,
'currency' : 'EUR',
'amount_in_cents' : 100
}})
chartmogul.SubscriptionEvent.destroy_with_params(config, data={
'subscription_event' : {
'id' : 73966836
}})import chartmogul
chartmogul.Subscription.list_imported(config, uuid='cus_5915ee5a-babd-406b-b8ce-d207133fb4cb')
chartmogul.Subscription.cancel(config, uuid='sub_3995ee5a-bbdb-406b-a8ca-d207133fb9bb' data={'cancelled_at': ''})
chartmogul.Subscription.modify(config, uuid='sub_3995ee5a-bbdb-406b-a8ca-d207133fb9bb' data={'cancellation_dates': []})Available methods in Metrics API:
chartmogul.Metrics.all(config,
start_date='2015-01-01', # notice the _ here
end_date='2015-11-24',
interval='month',
geo='GB',
plans='Bronze Plan'
)
chartmogul.Metrics.mrr(config,
start_date='2015-01-01',
end_date='2015-11-24',
interval='month',
geo='GB',
plans='PRO Plan')
chartmogul.Metrics.arr(config, data={})
chartmogul.Metrics.arpa(config, data={})
chartmogul.Metrics.asp(config, data={})
chartmogul.Metrics.customer_count(config, data={})
chartmogul.Metrics.customer_churn_rate(config, data={})
chartmogul.Metrics.mrr_churn_rate(config, data={})
chartmogul.Metrics.ltv(config, data={})
chartmogul.CustomerActivity.all(config, uuid='')
chartmogul.CustomerSubscription.all(config, uuid='cus_cf121bf8-db58-11ec-8575-43bda9fb67ad')
chartmogul.Activity.all(config, start_date='2020-06-02T00:00:00Z')
chartmogul.ActivitiesExport.create(config,data={})
chartmogul.ActivitiesExport.create(config, data={'type':'churn', 'start-date':'2020-06-02T00:00:00Z'})
chartmogul.ActivitiesExport.retrieve(config, id='febbd467-40d4-4f99-a647-3f47333453db')Available methods:
chartmogul.Account.retrieve(config)The library throws TypeError if data parameter is not serializable.
The chartmogul.ArgumentMissingError is raised if obligatory uuid or data
is missing in the call.
The error chartmogul.APIError is raised for any non-20x response from the API.
It always has cause of type requests.HTTPError, which contains the response,
so you can extract JSON/text in the following way (and program reaction):
from pprint import pprint
try:
chartmogul.doStuff()
except chartmogul.APIError as e:
response = e.__cause__.response
try:
pprint(response.json())
except ValueError:
pprint(response.text)The cause default serialization doesn't give the API user much detail:
HTTPError('422 Client Error: Unprocessable Entity for url: https://api.chartmogul.com/v1/data_sources',)
That's why it's wrapped, so that you get the detail by default.
APIError(b'{"errors":{"name":"Has already been taken."}}',)
To work on the library:
- Fork it
- Create your feature branch (
git checkout -b my-new-feature) - Install dependencies:
pip3 install -r requirements.txt && python3 setup.py develop - Fix bugs or add features. Make sure the changes pass the coding guidelines (use
pylama). - Write tests for your new features. Use
requests_mockfor HTTP mocking.- To run test install requirement-test
pip3 install -r requirements-test.txtand run withpython -m unittest:pip3 install coveragecoverage run ./setup.py testcoverage html --include='chartmogul/*'- Find results in
htmlcov/index.html
- To run test install requirement-test
- If all tests are passed, push to the branch (
git push origin my-new-feature) - Create a new Pull Request
For a testing project we recommend setting up a virtualenv with development mode installation and Jupyter. virtualenvwrapper is another handy tool.
Built using Requests.
Bug reports and pull requests are welcome on GitHub at https://github.com/chartmogul/chartmogul-python.
Make sure that:
- you have prepared
~/.pypircwith credentials, - a higher version has been set in
chartmogul/__init__.py, - Test & build package
python3 setup.py test sdist - release works
twine upload --repository-url https://test.pypi.org/legacy/ dist/*, - release to production
twine upload dist/*,
The library is available as open source under the terms of the MIT License.
Copyright (c) 2016 ChartMogul Ltd.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the 'Software'), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED 'AS IS', WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.