Skip to content

prastamaha/openstack-installer

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

50 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Openstack Auto Installer

This is a script for auto Install Openstack Queens in centos7 with 2 node

Requirement

  • 2 nic for each node (controller & compute)

  • Internet access for each node

Prerequisites

Network

  • Configure your each node network like this :
    ========== FORMAT ============

    Hostname   : $SERVER_TYPE
    
    # MANAGEMENT NETWORK
    Interface  : $MANAGEMENT_INT_NAME
    IP Address : $MANAGEMENT_IP
    Netmask    : $MANAGEMENT_NETMASK
    Gateway    : $MANAGEMENT_GATEWAY
    
    # PROVIDER NETWORK
    Interface  : $PROVIDER_INT_NAME
    IP Address : $PROVIDER_IP
    Netmask    : $PROVIDER_NETMASK
    Gateway    : without gateway

    DNS Server : $DNS

Management network is a network requires a gateway to provide Internet access to all nodes for administrative purposes such as package installation, security updates, DNS, and NTP.

Provider network is a network that will be used as an external network for the instance

  • network Configuration example :
    ======= CONTROLLER NODE =======

    Hostname   : controller

    # MANAGEMENT NETWORK
    Interface  : enp2s0
    IP Address : 192.168.0.200
    Netmask    : 255.255.255.0
    Gateway    : 192.168.0.1

    # PROVIDER NETWORK
    Interface  : enp3s0
    IP Address : 10.1.1.10
    Netmask    : 255.255.255.0
    Gateway    : without gateway

    DNS Server : 8.8.8.8
    ======== COMPUTE NODE =========

    Hostname   : compute
    
    # MANAGEMENT NETWORK
    Interface  : enp2s0
    IP Address : 192.168.0.210
    Netmask    : 255.255.255.0
    Gateway    : 192.168.0.1

    # PROVIDER NETWORK
    Interface  : enp3s0
    IP Address : 10.1.1.20
    Netmask    : 255.255.255.0
    Gateway    : without gateway

    DNS Server : 8.8.8.8

NOTE: This IP address may change depends on your networking.

Host Mapping

  • Configure on each node
    nano /etc/hosts

    192.168.0.200 controller
    192.168.0.210 compute

NOTE: This IP address may change depends on your networking.

  • verification
    ping -c 3 controller
    ping -c 3 compute
    ping -c 3 10.1.1.10
    ping -c 3 10.1.1.20
    ping -c 3 google.com

make sure the ping results are successful

User and Password

OpenStack requires a user and password for each service, when running installer.sh, you will be asked to enter a password for a number of services as below which will be stored on ./user/user_var.sh

Password Description
DBROOT_PASS Root password for the database
ADMIN_PASS Password of user admin
GLANCE_PASS Password of Image service user glance
GLANCEDB_PASS Database password for Image service
KEYSTONEDB_PASS Database password of Identity service
NEUTRON_PASS Password of Networking service user neutron
NEURONDB_PASS Database password for the Networking service
NOVA_PASS Password of Compute service user nova
NOVADB_PASS Database password for Compute service
PLACEMENT_PASS Password of the Placement service user placement
RABBIT_PASS Password of RabbitMQ user openstack
METADATA_SECRET Secret for the metadata proxy

ssh without password

Run this command on each node

  • Controller node
    # ssh-keygen -t rsa
    # ssh-copy-id -i ~/.ssh/id_rsa.pub root@$COMPUTE_PROVIDER_IP
  • Compute node
    # ssh-keygen -t rsa
    # ssh-copy-id -i ~/.ssh/id_rsa.pub root@$CONTROLLER_PROVIDER_IP

replace $COMPUTE_PROVIDER_IP and $CONTROLLER_PROVIDER_IP depens on your networking

Instsallation

  1. Clone the repository
# git clone https://github.com/prastamaha/openstack-installer.git
  1. Go to openstack-installer directory
# cd openstack-installer/
  1. Run the installer, First we are going to configure controller, choose 1
# ./installer.sh
    
    WARNING: please follow the "README.md" before run this script
    Select the type of server to be installed: 
    [1] Controller
    [2] Compute
    >> 1
  1. Will appear the banner for create network_var.sh, Press Y
    NOTE: if you have created network_var.sh before, select "n" 
    Do you want to create network_var.sh [Y/n]? Y
    
    follow the instruction
    network_var.sh will be placed on ~/openstack-installer/network/network_var.sh
  1. Will appear the banner for create network_var.sh, Press Y
    NOTE: if you have created user_var.sh before, select "n" 
    Do you want to create user_var.sh [Y/n]? Y
    
    follow the instruction
    user_var.sh will be placed on ~/openstack-installer/user/user_var.sh
  1. will appear the menu of service to be installed press 1-6 to install openstack basic service in controller node
    ==============================
    SELECT SERVICE TO BE INSTALLED: 
    ==============================
    [1] Prerequisites
    [2] Keystone
    [3] Glance
    [4] Nova - controller
    [5] Neutron - controller
    [6] Horizon
    [7] Add Nova compute service
    [8] Add Neutron compute service
    [0] Exit
    >>
    
    follow instruction
  1. in compute node follow step 1-2

  2. Run the installer, we are going to configure compute node, choose 2

# ./installer.sh
    
    WARNING: please follow the "README.md" before run this script
    Select the type of server to be installed: 
    [1] Controller
    [2] Compute
    >> 2
  1. next, follow step 4-5

  2. After that, will appear the menu of service to be installed press 1-3 to install openstack basic service in compute node

    ==============================
    SELECT SERVICE TO BE INSTALLED: 
    [1] Prerequisites
    [2] Nova - compute
    [3] Neutron - compute
    [0] Exit
    >>

    follow instruction
  1. We are go back to controller node press 7-8 to add nova and neutron service in compute node
    ==============================
    SELECT SERVICE TO BE INSTALLED: 
    ==============================
    [1] Prerequisites
    [2] Keystone
    [3] Glance
    [4] Nova - controller
    [5] Neutron - controller
    [6] Horizon
    [7] Add Nova compute service
    [8] Add Neutron compute service
    [0] Exit
    >>
    
    follow instruction
  1. check the nova agent (run on controller node)
# openstack compute service list
  1. make sure nova agent list will appear like this
    +----+------------------+------------+----------+---------+-------+----------------------------+
    | ID | Binary           | Host       | Zone     | Status  | State | Updated At                 |
    +----+------------------+------------+----------+---------+-------+----------------------------+
    |  1 | nova-consoleauth | controller | internal | enabled | up    | 2020-02-13T03:55:26.000000 |
    |  2 | nova-conductor   | controller | internal | enabled | up    | 2020-02-13T03:55:28.000000 |
    |  3 | nova-scheduler   | controller | internal | enabled | up    | 2020-02-13T03:55:27.000000 |
    |  6 | nova-compute     | compute    | nova     | enabled | up    | 2020-02-13T03:55:21.000000 |
    +----+------------------+------------+----------+---------+-------+----------------------------+
  1. check the neutron agent (run on controller node)
# openstack network agent list
  1. make sure neutron agent list will appear like this
+--------------------------------------+--------------------+------------+-------------------+-------+-------+---------------------------+
| ID                                   | Agent Type         | Host       | Availability Zone | Alive | State | Binary                    |
+--------------------------------------+--------------------+------------+-------------------+-------+-------+---------------------------+
| 0b92a6a7-15c8-46a8-a270-5cf1adbc3faa | DHCP agent         | controller | nova              | :-)   | UP    | neutron-dhcp-agent        |
| 11f455a5-21f3-46eb-a6c2-b20ab4b56d25 | L3 agent           | controller | nova              | :-)   | UP    | neutron-l3-agent          |
| 2be94656-8768-4f18-8a5f-0aa29ab5da80 | Open vSwitch agent | controller | None              | :-)   | UP    | neutron-openvswitch-agent |
| a0e2c1ba-2780-4c80-899b-b8c121af5713 | Metadata agent     | controller | None              | :-)   | UP    | neutron-metadata-agent    |
| b2fc359a-5188-43f5-9bc8-d2db29f4a169 | Open vSwitch agent | compute    | None              | :-)   | UP    | neutron-openvswitch-agent |
+--------------------------------------+--------------------+------------+-------------------+-------+-------+---------------------------+

  1. if host compute doesnt appear in agent list, Reboot all nodes and run this command when the all nodes have bootup
# systemctl restart openstack-nova* neutron*

Environment

if you want install openstack on virtualization qemu-kvm, you need add configuration on your controller node like this:

nano /etc/nova/nova.conf

virt_type=qemu

then restart nova and service

systemctl restart openstack-nova*

About

Auto installer script openstack on centos7

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages