Fix typos

bin/mpt-test/src/circuit/state_update.rs

@@ -57,13 +57,13 @@ pub struct StateUpdateCircuitConfig<F: Field> {
     /// The MPT table, where the state updates are stored
     pub pi_mpt: MptTable,
 
-    /// Intance column, used to check public inputs
+    /// Instance column, used to check public inputs
     pub instance: Column<Instance>,
 
     /// ONE if the first row, ZERO otherwise
     pub is_first: Column<Fixed>,
 
-    /// ONE if row is paddding, ZERO otherwise
+    /// ONE if row is padding, ZERO otherwise
     pub is_padding: IsZeroConfig<F>,
 
     /// ONE is the last used row, ZERO otherwise
@@ -465,7 +465,7 @@ impl<F: Field> Circuit<F> for StateUpdateCircuit<F> {
                                 ).unwrap()
                             );
 
-                    // at beggining, set the old root and number of proofs
+                    // at beginning, set the old root and number of proofs
 
                     if offset == 0 {
                         pi.push(Some(old_root_lo));

bus-mapping/README.md

@@ -158,7 +158,7 @@ On that way, we would get something like this for the Memory ops:
 | `key`  | `val`         | `rw`    | `gc` | Note                                     |
 |:------:| ------------- | ------- | ---- | ---------------------------------------- |
 | `0x40` | `0`           | `Write` |      | Init                                     |
-| `0x40` | `0x80`        | `Write` | 0    | Assume written at the begining of `code` |
+| `0x40` | `0x80`        | `Write` | 0    | Assume written at the beginning of `code`|
 | `0x40` | `0x80`        | `Read`  | 4    | `56 MLOAD`                               |
 |   -    |               |         |      |                                          |
 | `0x80` | `0`           | `Write` |      | Init                                     |

bus-mapping/src/circuit_input_builder.rs

@@ -84,7 +84,7 @@ impl FeatureConfig {
 #[derive(Debug, Clone, Copy)]
 pub struct FixedCParams {
     /// Maximum number of rw operations in the state circuit (RwTable length /
-    /// nummber of rows). This must be at least the number of rw operations
+    /// number of rows). This must be at least the number of rw operations
     /// + 1, in order to allocate at least a Start row.
     pub max_rws: usize,
     // TODO: evm_rows: Maximum number of rows in the EVM Circuit
@@ -190,7 +190,7 @@ pub struct CircuitInputBuilder<C: CircuitsParams> {
     pub code_db: CodeDB,
     /// Block
     pub block: Block,
-    /// Circuits Setup Paramteres
+    /// Circuits Setup Parameters
     pub circuits_params: C,
     /// Block Context
     pub block_ctx: BlockContext,
@@ -544,7 +544,7 @@ pub fn keccak_inputs(block: &Block, code_db: &CodeDB) -> Result<Vec<Vec<u8>>, Er
 }
 
 /// Generate the keccak inputs required by the SignVerify Chip from the
-/// signature datas.
+/// signature data.
 pub fn keccak_inputs_sign_verify(sigs: &[SignData]) -> Vec<Vec<u8>> {
     let mut inputs = Vec::new();
     for sig in sigs {

bus-mapping/src/circuit_input_builder/block.rs

@@ -60,7 +60,7 @@ pub struct Block {
     /// chain id
     pub chain_id: Word,
     /// history hashes contains most recent 256 block hashes in history, where
-    /// the lastest one is at history_hashes[history_hashes.len() - 1].
+    /// the latest one is at history_hashes[history_hashes.len() - 1].
     pub history_hashes: Vec<Word>,
     /// coinbase
     pub coinbase: Address,

bus-mapping/src/circuit_input_builder/call.rs

@@ -63,7 +63,7 @@ pub struct Call {
     pub kind: CallKind,
     /// This call is being executed without write access (STATIC)
     pub is_static: bool,
-    /// This call generated implicity by a Transaction.
+    /// This call generated implicitly by a Transaction.
     pub is_root: bool,
     /// This call is persistent or call stack reverts at some point
     pub is_persistent: bool,

bus-mapping/src/circuit_input_builder/execution.rs

@@ -337,7 +337,7 @@ impl From<(Word, Word, Word)> for ExpStep {
     }
 }
 
-/// Event representating an exponentiation `a ^ b == d (mod 2^256)`.
+/// Event representing an exponentiation `a ^ b == d (mod 2^256)`.
 #[derive(Clone, Debug)]
 pub struct ExpEvent {
     /// Identifier for the exponentiation trace.

bus-mapping/src/circuit_input_builder/tracer_tests.rs

@@ -146,7 +146,7 @@ fn check_err_depth(step: &GethExecStep, next_step: Option<&GethExecStep>) -> boo
 
 #[test]
 fn tracer_err_depth() {
-    // Recursive CALL will exaust the call depth
+    // Recursive CALL will exhaust the call depth
     let code = bytecode! {
              PUSH1(0x0) // retLength
              PUSH1(0x0) // retOffset

bus-mapping/src/error.rs

@@ -105,7 +105,7 @@ pub enum OogError {
     SelfDestruct,
 }
 
-// Given OpCodeId, returns correponding OogError.
+// Given OpCodeId, returns corresponding OogError.
 impl From<&OpcodeId> for OogError {
     fn from(op: &OpcodeId) -> Self {
         match op {

bus-mapping/src/evm/opcodes/callop.rs

@@ -170,7 +170,7 @@ impl<const N_ARGS: usize> Opcode for CallOpcode<N_ARGS> {
         // read balance of caller to compare to value for insufficient_balance checking
         // in circuit, also use for callcode successful case check balance is
         // indeed larger than transfer value. for call opcode, it does in
-        // tranfer gadget implicitly.
+        // transfer gadget implicitly.
         state.account_read(
             &mut exec_step,
             call.caller_address,

bus-mapping/src/evm/opcodes/error_write_protection.rs

@@ -44,7 +44,7 @@ impl Opcode for ErrorWriteProtection {
         .contains(&geth_step.op));
 
         if geth_step.op == OpcodeId::CALL {
-            // get only the frist three stack elements since the third one is the value we
+            // get only the first three stack elements since the third one is the value we
             // want to check.
             for i in 0..3 {
                 state.stack_read(

bus-mapping/src/lib.rs

@@ -187,7 +187,7 @@
 //! | `key`  | `val`         | `rw`    | `gc` | Note                                     |
 //! |:------:| ------------- | ------- | ---- | ---------------------------------------- |
 //! | `0x40` | `0`           | `Write` |      | Init                                     |
-//! | `0x40` | `0x80`        | `Write` | 0    | Assume written at the begining of `code` |
+//! | `0x40` | `0x80`        | `Write` | 0    | Assume written at the beginning of `code`|
 //! | `0x40` | `0x80`        | `Read`  | 4    | `56 MLOAD`                               |
 //! |   -    |               |         |      |                                          |
 //! | `0x80` | `0`           | `Write` |      | Init                                     |
@@ -213,7 +213,7 @@
 //! See: <https://hackmd.io/@liangcc/zkvmbook/https%3A%2F%2Fhackmd.io%2FAmhZ2ryITxicmhYFyQ0DEw#Bus-Mapping>
 
 #![cfg_attr(docsrs, feature(doc_cfg))]
-// We want to have UPPERCASE idents sometimes.
+// We want to have UPPERCASE indents sometimes.
 #![allow(non_snake_case)]
 // Catch documentation errors caused by code changes.
 #![deny(rustdoc::broken_intra_doc_links)]

bus-mapping/src/mock.rs

@@ -20,7 +20,7 @@ pub struct BlockData<C: CircuitsParams> {
     /// chain id
     pub chain_id: Word,
     /// history hashes contains most recent 256 block hashes in history, where
-    /// the lastest one is at history_hashes[history_hashes.len() - 1].
+    /// the latest one is at history_hashes[history_hashes.len() - 1].
     pub history_hashes: Vec<Word>,
     /// Block from geth
     pub eth_block: eth_types::Block<eth_types::Transaction>,

bus-mapping/src/operation.rs

@@ -90,7 +90,7 @@ impl RWCounter {
     }
 }
 
-/// Enum used to differenciate between EVM Stack, Memory and Storage operations.
+/// Enum used to differentiate between EVM Stack, Memory and Storage operations.
 /// This is also used as the RwTableTag for the RwTable.
 #[derive(Debug, Clone, PartialEq, Eq, Copy, EnumIter, Hash)]
 pub enum Target {
@@ -1038,7 +1038,7 @@ impl<T: Op> Operation<T> {
         &mut self.op
     }
 
-    // /// Matches over an `Operation` returning the [`Target`] of the iternal
+    // /// Matches over an `Operation` returning the [`Target`] of the internal
     // op /// it stores inside.
     // pub const fn target(&self) -> Target {
     //     self.op.target()

bus-mapping/src/operation/container.rs

@@ -16,7 +16,7 @@ use itertools::Itertools;
 /// [`ExecStep`](crate::circuit_input_builder::ExecStep).
 ///
 /// Finally, the container also provides the capability of retrieving all of the
-/// `Stack`, `Memory` or `Storage` operations ordered according to the criterias
+/// `Stack`, `Memory` or `Storage` operations ordered according to the criteria
 /// they have specified.
 /// That serves as a way to get an input with which is easy to work with in
 /// order to construct the State proof.

eth-types/src/geth_types.rs

@@ -167,7 +167,7 @@ pub struct Transaction {
     /// Gas Limit / Supplied gas
     /// U64 type is required to serialize into proper hex with 0x prefix
     pub gas_limit: U64,
-    /// Transfered value
+    /// Transferred value
     pub value: Word,
     /// Gas Price
     pub gas_price: Word,
@@ -359,7 +359,7 @@ impl Transaction {
             ..response::Transaction::default()
         }
     }
-    /// Convinient method for gas limit
+    /// Convenient method for gas limit
     pub fn gas(&self) -> u64 {
         self.gas_limit.as_u64()
     }

eth-types/src/keccak.rs

@@ -253,7 +253,7 @@ impl Sponge {
     }
 }
 
-/// Convinient method to get 32 bytes digest
+/// Convenient method to get 32 bytes digest
 pub fn keccak256(msg: &[u8]) -> [u8; 32] {
     let mut keccak = Keccak::default();
     keccak.update(msg);

eth-types/src/sign_types.rs

@@ -140,7 +140,7 @@ pub fn recover_pk(
 }
 
 lazy_static! {
-    /// Secp256k1 Curve Scalar.  Referece: Section 2.4.1 (parameter `n`) in "SEC 2: Recommended
+    /// Secp256k1 Curve Scalar.  Reference: Section 2.4.1 (parameter `n`) in "SEC 2: Recommended
     /// Elliptic Curve Domain Parameters" document at http://www.secg.org/sec2-v2.pdf
     pub static ref SECP256K1_Q: BigUint = BigUint::from_bytes_le(&(secp256k1::Fq::ZERO - secp256k1::Fq::ONE).to_repr()) + 1u64;
 }

gadgets/src/is_zero.rs

@@ -52,7 +52,7 @@ impl<F: Field> IsZeroConfig<F> {
 }
 
 #[derive(Debug, Clone)]
-/// Wrapper arround [`IsZeroConfig`] for which [`Chip`] is implemented.
+/// Wrapper around [`IsZeroConfig`] for which [`Chip`] is implemented.
 pub struct IsZeroChip<F> {
     config: IsZeroConfig<F>,
 }

geth-utils/gethutil/mpt/state/statedb.go

@@ -767,7 +767,7 @@ func (s *StateDB) Copy() *StateDB {
 		// nil
 		if object, exist := s.stateObjects[addr]; exist {
 			// Even though the original object is dirty, we are not copying the journal,
-			// so we need to make sure that anyside effect the journal would have caused
+			// so we need to make sure that any side effect the journal would have caused
 			// during a commit (or similar op) is already applied to the copy.
 			state.stateObjects[addr] = object.deepCopy(state)
 
@@ -816,7 +816,7 @@ func (s *StateDB) Copy() *StateDB {
 	}
 	if s.snaps != nil {
 		// In order for the miner to be able to use and make additions
-		// to the snapshot tree, we need to copy that aswell.
+		// to the snapshot tree, we need to copy that as well.
 		// Otherwise, any block mined by ourselves will cause gaps in the tree,
 		// and force the miner to operate trie-backed only
 		state.snaps = s.snaps

geth-utils/gethutil/mpt/trie/hasher.go

@@ -40,7 +40,7 @@ func (b *sliceBuffer) Reset() {
 type hasher struct {
 	sha      crypto.KeccakState
 	tmp      sliceBuffer
-	parallel bool // Whether to use paralallel threads when hashing
+	parallel bool // Whether to use parallel threads when hashing
 }
 
 // hasherPool holds pureHashers
@@ -189,7 +189,7 @@ func (h *hasher) HashData(data []byte) HashNode {
 }
 
 // ProofHash is used to construct trie proofs, and returns the 'collapsed'
-// node (for later RLP encoding) aswell as the hashed node -- unless the
+// node (for later RLP encoding) as well as the hashed node -- unless the
 // node is smaller than 32 bytes, in which case it will be returned as is.
 // This method does not do anything on value- or hash-nodes.
 func (h *hasher) ProofHash(original Node) (collapsed, hashed Node) {

geth-utils/gethutil/mpt/types/block.go

@@ -314,7 +314,7 @@ func (b *Block) Header() *Header { return CopyHeader(b.header) }
 func (b *Block) Body() *Body { return &Body{b.transactions, b.uncles} }
 
 // Size returns the true RLP encoded storage size of the block, either by encoding
-// and returning it, or returning a previsouly cached value.
+// and returning it, or returning a previously cached value.
 func (b *Block) Size() common.StorageSize {
 	if size := b.size.Load(); size != nil {
 		return size.(common.StorageSize)

geth-utils/gethutil/trace.go

@@ -117,7 +117,7 @@ type Transaction struct {
 type TraceConfig struct {
 	ChainID *hexutil.Big `json:"chain_id"`
 	// HistoryHashes contains most recent 256 block hashes in history,
-	// where the lastest one is at HistoryHashes[len(HistoryHashes)-1].
+	// where the latest one is at HistoryHashes[len(HistoryHashes)-1].
 	HistoryHashes []*hexutil.Big             `json:"history_hashes"`
 	Block         Block                      `json:"block_constants"`
 	Accounts      map[common.Address]Account `json:"accounts"`

geth-utils/src/mpt.rs

@@ -96,7 +96,7 @@ pub fn get_witness(block_no: u64, mods: &[TrieModification], node_url: &str) ->
     unsafe { go::FreeString(c_str.as_ptr()) };
 
     // Note: previously this function returned a Vec of Nodes, but now returning a JSON string
-    // to avoid imporing zkEVM circuit here (that will create a circular dependency).
+    // to avoid importing zkEVM circuit here (that will create a circular dependency).
     // TODO: consider defining Node types in another crate.
 
     json

integration-tests/build.rs

@@ -45,7 +45,7 @@ enum BuildError {
     /// Vec<CompilerInput> is empty
     #[error("ArtifactError")]
     ArtifactError,
-    /// Functon compile_output failed to encode CompilerInput to Vec<u8>
+    /// Function compile_output failed to encode CompilerInput to Vec<u8>
     #[error("CompileOutputFailure({0:})")]
     CompileOutputFailure(String),
     /// Could not convert Vec<u8> to CompilerOutput

integration-tests/src/bin/gen_blockchain_data.rs

@@ -63,7 +63,7 @@ async fn dump_tx_trace(prov: Provider<Http>, receipt: TransactionReceipt, name:
         .expect("Failed to get transaction debug trace");
     let filename = format!("{}_trace.json", name);
     serde_json::to_writer(&File::create(filename).expect("cannot create file"), &trace)
-        .expect("Could not seralize trace as json data");
+        .expect("Could not serialize trace as json data");
 }
 
 fn erc20_transfer<M>(

integration-tests/src/integration_test_circuits.rs

@@ -164,7 +164,7 @@ fn test_actual_circuit<C: Circuit<Fr>>(
 
     let mut transcript = PoseidonTranscript::new(Vec::new());
 
-    // change instace to slice
+    // change instance to slice
     let instance: Vec<&[Fr]> = instance.iter().map(|v| v.as_slice()).collect();
 
     log::info!("gen circuit proof");
@@ -214,7 +214,7 @@ fn test_actual_root_circuit<C: Circuit<Fr>>(
 
     let mut transcript = EvmTranscript::<_, NativeLoader, _, _>::new(vec![]);
 
-    // change instace to slice
+    // change instance to slice
     let instance: Vec<&[Fr]> = instance.iter().map(|v| v.as_slice()).collect();
 
     log::info!("gen root circuit proof");

integration-tests/tests/circuit_input_builder.rs

@@ -74,7 +74,7 @@ macro_rules! declare_tests {
 }
 
 // This test builds the complete circuit inputs for the block where 1 ETH is
-// transfered.
+// transferred.
 declare_tests!(test_circuit_input_builder_block_transfer_0, "Transfer 0");
 // This test builds the complete circuit inputs for the block where the Greeter
 // contract is deployed.

mock/src/test_ctx.rs

@@ -80,7 +80,7 @@ pub struct TestContext<const NACC: usize, const NTX: usize> {
     /// Account list
     pub accounts: [Account; NACC],
     /// history hashes contains most recent 256 block hashes in history, where
-    /// the lastest one is at history_hashes[history_hashes.len() - 1].
+    /// the latest one is at history_hashes[history_hashes.len() - 1].
     pub history_hashes: Vec<Word>,
     /// Block from geth
     pub eth_block: eth_types::Block<eth_types::Transaction>,
@@ -172,7 +172,7 @@ impl<const NACC: usize, const NTX: usize> TestContext<NACC, NTX> {
     }
 }
 
-/// Collection of helper functions which contribute to specific rutines on the
+/// Collection of helper functions which contribute to specific routines on the
 /// builder pattern used to construct [`TestContext`]s.
 pub mod helpers {
     use super::*;

testool/README.md

@@ -102,7 +102,7 @@ Sometimes there are some files or specific tests that we want to disable at all.
 When the command line parameter `--report` is defined, it automatically: 
 
 - After the execution, a two files are created in the `report` folder. They are
-   - `<timestamp>-<git_commit>.hml` with the browseable results of the execution.
+   - `<timestamp>-<git_commit>.hml` with the browsable results of the execution.
    - `<timestamp>-<git_commit>.csv` with the raw results of the execution
 - The HTML file also contains the diff with the previous result. The previous result file is the more recent csv file with different commit from the current one
 

testool/src/abi.rs

@@ -15,7 +15,7 @@ pub fn encode_funccall(spec: &str) -> Result<Bytes> {
     let func_name = func_name_params[0];
     let func_params = &func_name_params[1..func_name_params.len() - 1];
 
-    // transform func_params and args into the appropiate types
+    // transform func_params and args into the appropriate types
 
     let map_type = |t| match t {
         "uint" => ParamType::Uint(256),

testool/src/main.rs

@@ -109,7 +109,7 @@ fn go() -> Result<()> {
     env_logger::Builder::from_env(env_logger::Env::default().default_filter_or("info")).init();
 
     log::info!("Using suite '{}'", args.suite);
-    log::info!("Parsing and compliling tests...");
+    log::info!("Parsing and compiling tests...");
     let compiler = Compiler::new(true, Some(PathBuf::from(CODEHASH_FILE)))?;
     let suite = config.suite(&args.suite)?.clone();
     let state_tests = load_statetests_suite(&suite.path, config, compiler)?;

zkevm-circuits/src/bin/stats/helpers.rs

@@ -213,7 +213,7 @@ pub(crate) fn print_circuit_stats_by_states(
             assert_eq!(ExecState::Op(opcode), step.exec_state);
             let height = fn_height(&builder.block, state, step_index);
 
-            // Substract 1 to step_index to remove the `BeginTx` step, which doesn't appear
+            // Subtract 1 to step_index to remove the `BeginTx` step, which doesn't appear
             // in the geth trace.
             let geth_step = &block.geth_traces[0].struct_logs[step_index - 1];
             assert_eq!(opcode, geth_step.op);

zkevm-circuits/src/bytecode_circuit/test.rs

@@ -194,7 +194,7 @@ fn bytecode_invalid_is_code() {
             })
             .verify(false);
     }
-    // Mark the 4rd byte as data (is code)
+    // Mark the 4th byte as data (is code)
     {
         BytecodeCircuit::<Fr>::from_bytes(bytecodes.clone(), k)
             .mut_rows(|rows| {