Feature Testing

This information describes the testing completed in the Project Arlo features. The intention is to describe the coverage of manual test cases that have been run so far, not necessarily to thoroughly document and provide evidence.

OpenConfig Models

• openconfig-platform
• openconfig-system
• openconfig-interface
• openconfig-acl
• openconfig-lldp

OpenConfig models

This section covers feature testing for the OpenConfig models supported in Project Arlo.

openconfig-platform

Tested CLI commands

• Date tested: 2019/07/23

Command	Description	Result	Notes
show platform	Displays platform information about components like PSU, fans, and temperature sensors	✔️
show platform syseeprom	Displays system EEPROM information	✔️

YANG object testing

• Date tested: 2019/07/23
• REST paths tested using the Swagger UI
• gNMI paths tested using gnmi-client CLI utility

Object	Attribute	REST Result	gNMI Result	Notes
components/component	empty	✔️
components/component	removable	✔️
components/component	name	✔️
components/component	operstatus	✔️
components/component	location	✔️
components/component	id	✔️
components/component	partno	✔️
components/component	serialno	✔️
components/component	mfgdate	✔️
components/component	hardwareversion	✔️
components/component	description	✔️
components/component	mfgname	✔️
components/component	software version	✔️

openconfig-system

Tested CLI commands

• Date tested: 2019/07/23

Command	Description	Result	Notes
show system	Displays system info including hostname, currenttime, boottime	✔️
show system memory	Displays total/used memory info	✔️
show system cpu	Displays CPU usage (user/kernel/idle) percentages	✔️
show system processes	Displays all processes running in the host system	✔️
show system processes pid <pid>	Displays specific process information	✔️

YANG object testing

• Date tested: 2019/07/23
• REST paths tested using the Swagger UI
• gNMI paths tested using gnmi-client CLI utility

Object	Attribute	REST Result	gNMI Result	Notes
system/state	empty	✔️
system/state	hostname	✔️
system/state	currentdatetime	✔️
system/state	boottime	✔️
system/memory	empty	✔️
system/memory	physical	✔️
system/memory	reserved	✔️
system/cpus/state/[user/kernel/idle]	empty	✔️
system/cpus/state/[user/kernel/idle]	instant	❌		Individual attributes not tested due to defect in translib
system/processes		✔️
system/processes/<pid>/state		✔️
system/processes/<pid>/state	Name	✔️
system/processes/<pid>/state	starttime	✔️
system/processes/<pid>/state	uptime	✔️
system/processes/<pid>/state	cpu-usage-user	✔️
system/processes/<pid>/state	cpu-usage-system	✔️
system/processes/<pid>/state	memory-usage	✔️
system/processes/<pid>/state	memory-utilization	✔️
system/processes/<pid>/state	pid	✔️

openconfig-interface

Tested CLI commands

• Date tested: 2019/07/23

Command	Description	Result	Notes
show interface status	Displays status of all interfaces	✔️	-
show interface counters	Displays port statistics of all interfaces	✔️	-
show interface Ethernet	Displays description of all interfaces	✔️	-
show interface Ethernet <id>	Displays description of a specific interface	✔️	-
description <string>	Configures description for an interface	✔️	-
no description	Removes description	✔️	-
shutdown	Shuts down an interface	✔️	-
no shutdown	Configures admin-status as UP for an interface	✔️	-
mtu <val>	Configures MTU for an interface	✔️	-
no mtu	Resets MTU to 9100 for an interface	✔️	-
ip address <ip-address with mask>	Configures IPv4 address for an interface	✔️	-
no ip address	Removes IPv4 address for an interface	✔️	-
ipv6 address	Configures IPv6 address for an interface	✔️	-
no ipv6 address	Removes IPv6 address for an interface	✔️	-

YANG object testing

• Date tested: 2019/07/23
• REST paths tested using the Swagger UI
• gNMI paths tested using gnmi-client CLI utility

Object	Attribute	REST Result	gNMI Result	Notes
/openconfig-interfaces:interfaces	Get Request	✔️	✔️
/openconfig-interfaces:interfaces/interface={name}	Get Request	✔️	✔️
/openconfig-interfaces:interfaces/interface={name}/config/		✔️	✔️
/openconfig-interfaces:interfaces/interface={name}/state/		✔️	✔️
/openconfig-interfaces:interfaces/interface={name}/state/admin-status	Get request for admin-status	✔️	✔️
/openconfig-interfaces:interfaces/interface={name}/state/mtu	Get request for mtu	✔️	✔️
/openconfig-interfaces:interfaces/interface={name}/config/mtu	Set request for mtu	✔️	✔️
/openconfig-interfaces:interfaces/interface={name}/subinterfaces/subinterface={index}/openconfig-if-ip:ipv4/addresses/address={ip}	get request for ipv4 address	✔️	❌	Not supported get type
/openconfig-interfaces:interfaces/interface={name}/subinterfaces/subinterface={index}/openconfig-if-ip:ipv6/addresses/address={ip}	get request for ipv6 address	✔️	❌	Not supported get type
/openconfig-interfaces:interfaces/interface={name}/subinterfaces/subinterface={index}/openconfig-if-ip:ipv4/addresses/address={ip}/config	set request for ipv4	✔️	✔️
/openconfig-interfaces:interfaces/interface={name}/subinterfaces/subinterface={index}/openconfig-if-ip:ipv6/addresses/address={ip}/config	set request for ipv6	✔️	✔️
/openconfig-interfaces:interfaces/interface={name}/subinterfaces/subinterface={index}/openconfig-if-ip:ipv4/addresses/address={ip}/config/prefix-length	remove ipv4 address	✔️	✔️
/openconfig-interfaces:interfaces/interface={name}/subinterfaces/subinterface={index}/openconfig-if-ip:ipv6/addresses/address={ip}/config/prefix-length	remove ipv6 address	✔️	✔️

openconfig-acl

Tested CLI commands

• Date tested: 2019/07/23

Command	Description	Result	Notes
ip access-list [ACL-table-name]	Configures an IPv4 ACL	✔️
seq <id> { permit | deny } [ tcp ] [ src-prefix | any] { src-eq <src-port> } [ dst-prefix | any ] { dst-eq <dst-port> } { dscp <value> }	Configures IPv4 ACL rule	✔️
show ip access-lists	Displays all ACLs	✔️
show ip access-lists [ACL-table-name]	Displays a specific IPv4 ACL	✔️
ip access-group [ACL-table-name] in	Applies ingress IPv4 access control list (ACL) to an interface	✔️
ip access-group [ACL-table-name] out	Applies egress IPv4 access control list (ACL) to an interface	✔️
show ip access-group	Displays IP access-group information	✔️	shows both ingress and egress config
no ip access-group [ACL-table-name] out	Removes egress IPv4 access control list (ACL) from an interface	❌	Change not reflected hardware, https://github.com/project-arlo/sonic-mgmt-framework/issues/44
no ip access-group [ACL-table-name] in	Removes ingress IPv4 access control list (ACL) from an interface	❌	Change not reflected in hardware, https://github.com/project-arlo/sonic-mgmt-framework/issues/43
no seq <id>	Delete ACL rule	✔️
no ip access-list [ACL-table-name]	Deletes ACL table	✔️

YANG object testing

• Date tested: 2019/07/23
• REST paths tested using the Swagger UI
• gNMI paths tested using gnmi-client CLI utility

Object	Attribute	Operation	REST Result	gNMI Result	Notes
openconfig-acl:acl		get all	✔️	✔️	testcase notes
openconfig-acl:acl/acl-sets	name,type	get specific ACL	✔️	✔️	testcase notes
openconfig-acl:acl		configure ACL rules	✔️	✔️
openconfig-acl:acl		delete all	✔️	❌	https://github.com/project-arlo/sonic-mgmt-framework/issues/57
openconfig-acl:acl		delete table	✔️	❌	https://github.com/project-arlo/sonic-mgmt-framework/issues/57
openconfig-acl:acl	name,type	delete specific ACL rule	✔️	❌	https://github.com/project-arlo/sonic-mgmt-framework/issues/57

openconfig-lldp

Note: SONiC does not support multiple LLDP neighbors on a single interface.

Tested CLI commands

• Date tested: 8/1/2019

Command	Description	Result	Notes
show lldp table	Displays a table of LLDP neighbors	✔️	testcase notes
show lldp neighbors	Displays LLDP information on all interfaces	✔️	testcase notes
show lldp neighbors <ifname>	Displays LLDP information on a specific interfaces	✔️	testcase notes

YANG object testing

• Date tested: 8/1/2019
• REST paths tested using the Swagger UI

/openconfig-lldp:lldp/interfaces
/openconfig-lldp:lldp/interfaces/interface={name}

gNMI paths tested using gnmi-client CLI utility

Object	Attribute	REST Result	gNMI Result	Notes
/openconfig-lldp:lldp/interfaces	GET request	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces	id	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces	system-name	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces	system-description	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces	chassis-id	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces	chassis-id-type	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces	port-description	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces	port-id	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces	port-id-type	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces	management-address	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces	capability	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces/interface={name}	GET request	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces/interface={name}	id	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces/interface={name}	system-name	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces/interface={name}	system-description	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces/interface={name}	chassis-id	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces/interface={name}	chassis-id-type	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces/interface={name}	port-description	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces/interface={name}	port-id	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces/interface={name}	port-id-type	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces/interface={name}	management-address	✔️	✔️	testcase notes
/openconfig-lldp:lldp/interfaces/interface={name}	capability	✔️	✔️	testcase notes