Add spectral factor gallery example

docs/examples/spectrum/spectral_factor.py

@@ -0,0 +1,140 @@
+"""
+Spectral Mismatch Estimation
+============================
+Comparison of spectral factor calculation methods used to estimate the spectral
+mismatch factor, :math:`M`, from atmospheric variable inputs.
+"""
+
+# %%
+# Introduction
+# ------------
+# This example demonstrates how to use different `spectrum.spectral_factor`
+# models in pvlib-python to calculate the spectral mismatch factor, :math:`M`.
+# While :math:`M` for a photovoltaic (PV) module can be calculated exactly
+# using spectral irradiance and module spectral response data, these data are
+# not always available. pvlib-python provides several functions to estimate the
+# spectral mismatch factor, :math:`M`, using proxies of the prevailing spectral
+# irradiance conditions, such as air mass and clearsky index, which are easily
+# derived from common ground-based measurements such as broadband irradiance.
+# More information on a range of spectral factor models, as well as the
+# variables upon which they are based, can be found in [1]_.
+#
+# Let's import some data. This example uses a Typical Meteorological Year 3
+# (TMY3) file for the location of Greensboro, North Carolina, from the
+# pvlib-python data directory. This TMY3 file is constructed using the median
+# month from each year between 1980 and 2003, from which we extract the first
+# week of August 2001 to analyse.
+
+# %%
+import pathlib
+from matplotlib import pyplot as plt
+import pandas as pd
+import pvlib
+from pvlib import location
+
+DATA_DIR = pathlib.Path(pvlib.__file__).parent / 'data'
+meteo, metadata = pvlib.iotools.read_tmy3(DATA_DIR / '723170TYA.CSV',
+ coerce_year=2001, map_variables=True)
+meteo = meteo.loc['2001-08-01':'2001-08-07']
+
+# %%
+# Spectral Factor Functions
+# -------------------------
+# This example demonstrates the application of three pvlib-python
+# spectral factor functions:
+#
+# - :py:func:`~pvlib.spectrum.spectral_factor_sapm`, which requires only
+# the absolute airmass, :math:`AM_a`
+# - :py:func:`~pvlib.spectrum.spectral_factor_pvspec`, which requires
+# :math:`AM_a` and the clearsky index, :math:`k_c`
+# - :py:func:`~pvlib.spectrum.spectral_factor_firstsolar`, which requires
+# :math:`AM_a` and the atmospheric precipitable water content, :math:`W`
+
+# %%
+# Calculation of inputs
+# ---------------------
+# Let's calculate the absolute air mass, which is required for all three
+# models. We use the Kasten and Young [2]_ model, which requires the apparent
+# sun zenith. Note: TMY3 files timestamps indicate the end of the hour, so we
+# shift the indices back 30-minutes to calculate solar position at the centre
+# of the interval.
+
+# Create a location object
+lat, lon = metadata['latitude'], metadata['longitude']
+alt = altitude = metadata['altitude']
+tz = 'Etc/GMT+5'
+loc = location.Location(lat, lon, tz=tz, name='Greensboro, NC')
+
+# Calculate solar position parameters
+solpos = loc.get_solarposition(
+ meteo.index.shift(freq="-30min"),
+ pressure=meteo.pressure*100, # convert from millibar to Pa
+ temperature=meteo.temp_air)
+solpos.index = meteo.index # reset index to end of the hour
+
+amr = pvlib.atmosphere.get_relative_airmass(solpos.apparent_zenith).dropna()
+# relative airmass
+ama = amr*(meteo.pressure/1013.25) # absolute airmass
+# %%
+# Now we calculate the clearsky index, :math:`k_c`, by comparing the TMY3 GHI
+# to the modelled clearsky GHI.
+
+cs = loc.get_clearsky(meteo.index)
+kc = pvlib.irradiance.clearsky_index(meteo.ghi, cs.ghi)
+# %%
+# :math:`W` is provided in the TMY3 file but in other cases can be calculated
+# from temperature and relative humidity
+# (see :py:func:`pvlib.atmosphere.gueymard94_pw`).
+
+w = meteo.precipitable_water
+
+# %%
+# Calculation of Spectral Mismatch
+# --------------------------------
+# Let's calculate the spectral mismatch factor using the three spectral factor
+# functions. First, we need to import some model coefficients for the SAPM
+# spectral factor function, which, unlike the other two functions, lacks
+# built-in coefficients.
+
+# Import some for a mc-Si module from the SAPM module database.
+module = pvlib.pvsystem.retrieve_sam('SandiaMod')['LG_LG290N1C_G3__2013_']
+# Calculate M using the three models for an mc-Si PV module.
+m_sapm = pvlib.spectrum.spectral_factor_sapm(ama, module)
+m_pvspec = pvlib.spectrum.spectral_factor_pvspec(ama, kc, 'multisi')
+m_fs = pvlib.spectrum.spectral_factor_firstsolar(w, ama, 'multisi')
+df_results = pd.concat([m_sapm, m_pvspec, m_fs], axis=1)
+df_results.columns = ['SAPM', 'PVSPEC', 'FS']
+# %%
+# Comparison Plots
+# ----------------
+# We can plot the results to visualise variability between the models. Note
+# that this is not an exact comparison since the exact same PV modules has
+# not been modelled in each case, only the same module technology.
+
+# Plot M
+fig1, (ax1, ax2) = plt.subplots(2, 1)
+df_results.plot(ax=ax1, legend=False)
+ax1.set_xlabel('Day')
+ax1.set_ylabel('Mismatch (-)')
+ax1.set_ylim(0.85, 1.15)
+
+# We can also zoom in one one day, for example August 2nd.
+df_results.loc['2001-08-02'].plot(ax=ax2)
+ax2.set_xlabel('Time')
+ax2.set_ylabel('Mismatch (-)')
+ax2.set_ylim(0.85, 1.15)
+
+plt.tight_layout()
+
+plt.show()
+
+# %%
+# References
+# ----------
+# .. [1] Daxini, Rajiv, and Wu, Yupeng (2023). "Review of methods to account
+# for the solar spectral influence on photovoltaic device performance."
+# Energy 286
+# :doi:`10.1016/j.energy.2023.129461`
+# .. [2] Kasten, F. and Young, A.T., 1989. Revised optical air mass tables
+# and approximation formula. Applied Optics, 28(22), pp.4735-4738.
+# :doi:`10.1364/AO.28.004735`

docs/sphinx/source/whatsnew/v0.11.1.rst

@@ -25,6 +25,9 @@ Testing
 
 Documentation
 ~~~~~~~~~~~~~
+* Add new example to the example gallery to demonstrate the application of
+ several spectral mismatch factor models.
+ (:issue:`2107`, :pull:`2114`)
 
 
 Requirements
@@ -34,3 +37,4 @@ Requirements
 Contributors
 ~~~~~~~~~~~~
 * Echedey Luis (:ghuser:`echedey-ls`)
+* Rajiv Daxini (:ghuser:`RDaxini`)