Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
btrfs: fix race between direct IO write and fsync when using same fd
If we have 2 threads that are using the same file descriptor and one of them is doing direct IO writes while the other is doing fsync, we have a race where we can end up either: 1) Attempt a fsync without holding the inode's lock, triggering an assertion failures when assertions are enabled; 2) Do an invalid memory access from the fsync task because the file private points to memory allocated on stack by the direct IO task and it may be used by the fsync task after the stack was destroyed. The race happens like this: 1) A user space program opens a file descriptor with O_DIRECT; 2) The program spawns 2 threads using libpthread for example; 3) One of the threads uses the file descriptor to do direct IO writes, while the other calls fsync using the same file descriptor. 4) Call task A the thread doing direct IO writes and task B the thread doing fsyncs; 5) Task A does a direct IO write, and at btrfs_direct_write() sets the file's private to an on stack allocated private with the member 'fsync_skip_inode_lock' set to true; 6) Task B enters btrfs_sync_file() and sees that there's a private structure associated to the file which has 'fsync_skip_inode_lock' set to true, so it skips locking the inode's VFS lock; 7) Task A completes the direct IO write, and resets the file's private to NULL since it had no prior private and our private was stack allocated. Then it unlocks the inode's VFS lock; 8) Task B enters btrfs_get_ordered_extents_for_logging(), then the assertion that checks the inode's VFS lock is held fails, since task B never locked it and task A has already unlocked it. The stack trace produced is the following: assertion failed: inode_is_locked(&inode->vfs_inode), in fs/btrfs/ordered-data.c:983 ------------[ cut here ]------------ kernel BUG at fs/btrfs/ordered-data.c:983! Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 9 PID: 5072 Comm: worker Tainted: G U OE 6.10.5-1-default #1 openSUSE Tumbleweed 69f48d427608e1c09e60ea24c6c55e2ca1b049e8 Hardware name: Acer Predator PH315-52/Covini_CFS, BIOS V1.12 07/28/2020 RIP: 0010:btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs] Code: 50 d6 86 c0 e8 (...) RSP: 0018:ffff9e4a03dcfc78 EFLAGS: 00010246 RAX: 0000000000000054 RBX: ffff9078a9868e98 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff907dce4a7800 RDI: ffff907dce4a7800 RBP: ffff907805518800 R08: 0000000000000000 R09: ffff9e4a03dcfb38 R10: ffff9e4a03dcfb30 R11: 0000000000000003 R12: ffff907684ae7800 R13: 0000000000000001 R14: ffff90774646b600 R15: 0000000000000000 FS: 00007f04b96006c0(0000) GS:ffff907dce480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f32acbfc000 CR3: 00000001fd4fa005 CR4: 00000000003726f0 Call Trace: <TASK> ? __die_body.cold+0x14/0x24 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x6a/0x90 ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a] ? exc_invalid_op+0x50/0x70 ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a] ? asm_exc_invalid_op+0x1a/0x20 ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a] ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a] btrfs_sync_file+0x21a/0x4d0 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a] ? __seccomp_filter+0x31d/0x4f0 __x64_sys_fdatasync+0x4f/0x90 do_syscall_64+0x82/0x160 ? do_futex+0xcb/0x190 ? __x64_sys_futex+0x10e/0x1d0 ? switch_fpu_return+0x4f/0xd0 ? syscall_exit_to_user_mode+0x72/0x220 ? do_syscall_64+0x8e/0x160 ? syscall_exit_to_user_mode+0x72/0x220 ? do_syscall_64+0x8e/0x160 ? syscall_exit_to_user_mode+0x72/0x220 ? do_syscall_64+0x8e/0x160 ? syscall_exit_to_user_mode+0x72/0x220 ? do_syscall_64+0x8e/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Another problem here is if task B grabs the private pointer and then uses it after task A has finished, since the private was allocated in the stack of task A, it results in some invalid memory access with a hard to predict result. This issue, triggering the assertion, was observed with QEMU workloads by two users in the Link tags below. Fix this by not relying on a file's private to pass information to fsync that it should skip locking the inode and instead pass this information through a special value stored in current->journal_info. This is safe because in the relevant section of the direct IO write path we are not holding a transaction handle, so current->journal_info is NULL. The following C program triggers the issue: $ cat repro.c /* Get the O_DIRECT definition. */ #ifndef _GNU_SOURCE #define _GNU_SOURCE #endif #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <stdint.h> #include <fcntl.h> #include <errno.h> #include <string.h> #include <pthread.h> static int fd; static ssize_t do_write(int fd, const void *buf, size_t count, off_t offset) { while (count > 0) { ssize_t ret; ret = pwrite(fd, buf, count, offset); if (ret < 0) { if (errno == EINTR) continue; return ret; } count -= ret; buf += ret; } return 0; } static void *fsync_loop(void *arg) { while (1) { int ret; ret = fsync(fd); if (ret != 0) { perror("Fsync failed"); exit(6); } } } int main(int argc, char *argv[]) { long pagesize; void *write_buf; pthread_t fsyncer; int ret; if (argc != 2) { fprintf(stderr, "Use: %s <file path>\n", argv[0]); return 1; } fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_DIRECT, 0666); if (fd == -1) { perror("Failed to open/create file"); return 1; } pagesize = sysconf(_SC_PAGE_SIZE); if (pagesize == -1) { perror("Failed to get page size"); return 2; } ret = posix_memalign(&write_buf, pagesize, pagesize); if (ret) { perror("Failed to allocate buffer"); return 3; } ret = pthread_create(&fsyncer, NULL, fsync_loop, NULL); if (ret != 0) { fprintf(stderr, "Failed to create writer thread: %d\n", ret); return 4; } while (1) { ret = do_write(fd, write_buf, pagesize, 0); if (ret != 0) { perror("Write failed"); exit(5); } } return 0; } $ mkfs.btrfs -f /dev/sdi $ mount /dev/sdi /mnt/sdi $ timeout 10 ./repro /mnt/sdi/foo Usually the race is triggered within less than 1 second. A test case for fstests will follow soon. Reported-by: Paulo Dias <paulo.miguel.dias@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=219187 Reported-by: Andreas Jahn <jahn-andi@web.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=219199 Reported-by: syzbot+4704b3cc972bd76024f1@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/00000000000044ff540620d7dee2@google.com/ Fixes: 939b656 ("btrfs: fix corruption after buffer fault in during direct IO append write") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
- Loading branch information
