Skip to content

rubixchain/rubixgoplatform

Repository files navigation

rubixgoplatform

The new Rubixgoplatform support command line options to run/configure the Rubix node. To run the application use the follwing format.

./rubixgoplatform <cmd> <options>

Use the following commands

                       -v : To get tool version

                       -h : To get help

                      run : To run the rubix core

                     ping : Use the command to ping the peer

Run Command : To run the Rubix node use this command.

./rubixgoplatform run -p node1 -n 0 -s -testNet

This following options are used to run the Rubix node
  -n uint
        Node number
  -p string
        Working directory path (default "./")
  -s    Start the core
  -testNet
        Run as test net
  -testNetKey string
        Test net key (default "testswarm.key")

Ping Command : To ping any peer in network use this command.

./rubixgoplatform ping -peerID 12D3KooWKr8dEQiLXuKacxDCZiHePVEMpgjxk19C3QozuUVQcQHA -port <port>

This following options are used for this command
  -addr string
        Server/Host Address (default "localhost")
  -peerID string
        Peerd ID
  -port string
        Server/Host port (default "20000")

Add Bootstrap Command : To add bootstrap to node use this command.

./rubixgoplatform addbootstrap -peers /ip4/103.60.213.76/tcp/4001/p2p/QmR1VH6SsEN1wf4EmstxXtNMvR35KEetbBetiGWWKWavJ6

This following options are used for this command
  -addr string
        Server/Host Address (default "localhost")
  -peers string
        Bootstrap peers, mutiple peers will be seprated by comma
  -port string
        Server/Host port (default "20000")

Remove Bootstrap Command : To remove bootstrap from node use this command.

./rubixgoplatform removebootstrap -peers /ip4/103.60.213.76/tcp/4001/p2p/QmR1VH6SsEN1wf4EmstxXtNMvR35KEetbBetiGWWKWavJ6

This following options are used for this command
  -addr string
        Server/Host Address (default "localhost")
  -peers string
        Bootstrap peers, mutiple peers will be seprated by comma
  -port string
        Server/Host port (default "20000")

Remove All Bootstrap Command : To remove all bootstrap from node use this command.

./rubixgoplatform removeallbootstrap

This following options are used for this command
  -addr string
        Server/Host Address (default "localhost")
  -port string
        Server/Host port (default "20000")

Get All Bootstrap Command : To get all bootstrap from node use this command.

./rubixgoplatform getallbootstrap

This following options are used for this command
  -addr string
        Server/Host Address (default "localhost")
  -port string
        Server/Host port (default "20000")

Create DID Command : To create DID use this command.

./rubixgoplatform createdid

This following options are used for this command
  -port string
        Server/Host port (default "20000")
  -didType int
        DID type (0-Basic Mode, 1-Standard Mode, 2-Wallet Mode, 3-Child Mode, 4-Light Mode) (default 0)
  -didSecret string
        DID secret (default "My DID Secret")
  -privPWD string
        Private key password (default "mypassword")
  -quorumPWD string
        Quroum key password (default "mypassword")
  -imgFile string
        Image file to create DID (Must be 256x256 PNG image) (default "image.png")
  -didImgFile string
        DID image file name (default "did.png")
  -privImgFile string
        DID private share image file name (default "pvtShare.png")
  -pubImgFile string
        DID public share image file name (default "pubShare.png")
  -privKeyFile string
        DID private key file name (default "pvtKey.pem")
  -pubKeyFile string
        DID public key file name (default "pubKey.pem")
  -mnemonicKeyFile string
        Mnemonic key file (default "mnemonic.txt")
  -ChildPath int
        BIP Child Path (default 0)
  -fp forcepassword
        This flag prompts to enter the password in terminal

   _Note: Use Light mode for PKI based authentication with backward compatiblity to PKI+NLSS based sign, and Basic mode for PKI+NLSS based authentication._

Get All DID Command : To get all DID use this command.

./rubixgoplatform getalldid

This following options are used for this command
  -addr string
        Server/Host Address (default "localhost")
  -port string
        Server/Host port (default "20000")

To Register DID Command : To register DID & PeerID map on the network use this command.

./rubixgoplatform registerdid 

This following options are used for this command
  -addr string
        Server/Host Address (default "localhost")
  -port string
        Server/Host port (default "20000")
  -did string
        DID address (default "")

To Add Quorum List : To add quorum list use this command.

./rubixgoplatform addquorum

This following options are used for this command
  -addr string
        Server/Host Address (default "localhost")
  -port string
        Server/Host port (default "20000")
  -quorumList string
        quorum list file name (default "quorumlist.json")

To Get All Quorum List : To get all quorum list use this command.

./rubixgoplatform getallquorum

This following options are used for this command
  -addr string
        Server/Host Address (default "localhost")
  -port string
        Server/Host port (default "20000")

To Remove All Quorum List : To remove all quorum list use this command.

./rubixgoplatform removeallquorum

This following options are used for this command
  -addr string
        Server/Host Address (default "localhost")
  -port string
        Server/Host port (default "20000")

To Setup Quorum : To setup quorum use this command. This setup quorum by providn quorum private key password.

./rubixgoplatform setupquorum

This following options are used for this command
  -addr string
        Server/Host Address (default "localhost")
  -port string
        Server/Host port (default "20000")
  -quorumPWD string
        Quroum key password (default "mypassword")
  -fp forcepassword
        Enter the  Quroum key password in terminal

To Setup Service Command : To setup service on the node use this command.

./rubixgoplatform setupservice 

This following options are used for this command
  -addr string
        Server/Host Address (default "localhost")
  -port string
        Server/Host port (default "20000")
  -srvName string
        Service name (default "explorer_service")
  -dbAddress string
        Database address (default "localhost")
  -dbName string
        Explorer database name (default "ExplorerDB")
  -dbPassword string
        Database password (default "password")
  -dbPort string
        Database port number (default "1433")
  -dbType string
        DB Type, supported database are SQLServer, PostgressSQL, MySQL & Sqlite3 (default "SQLServer")
  -dbUsername string
        Database username (default "sa")

To Generate Test RBT Command : To generate test RBT on the node use this command.

./rubixgoplatform generatetestrbt 

This following options are used for this command
  -addr string
        Server/Host Address (default "localhost")
  -port string
        Server/Host port (default "20000")
  -did string
        DID address (default "")
  -numTokens int
        Number tokens to be generated (default 1)
  -fp 
        Force password to be entered on the terminal
  -privPWD string
        Private key password (default "mypassword")
  -privImgFile string
        DID private share image file name (default "pvtShare.png")
  -privKeyFile string
        DID private key file name (default "pvtKey.pem")

To Transfer RBT Command : To trasnfer RBT on the node use this command.

./rubixgoplatform transferrbt 

This following options are used for this command
  -addr string
        Server/Host Address (default "localhost")
  -port string
        Server/Host port (default "20000")
  -senderAddr string
        Sender address (default "")
  -receiverAddr string
        Receiver address (default "")
  -rbtAmount float
        RBT amount to trasnfered (default 0.0)
  -transComment string
        Transfer comment (default "Test tranasaction")
  -transType int
        Transaction type (default 2)
  -fp 
        Force password to be entered on the terminal
  -privPWD string
        Private key password (default "mypassword")
  -privImgFile string
        DID private share image file name (default "pvtShare.png")
  -privKeyFile string
        DID private key file name (default "pvtKey.pem")

To Get Account Info Command : To get account information on the node use this command.

./rubixgoplatform getaccountinfo 

This following options are used for this command
  -addr string
        Server/Host Address (default "localhost")
  -port string
        Server/Host port (default "20000")
  -did string
        DID address (default "")

To Dump Token Chain Command : To dump token chain on the node use this command.

./rubixgoplatform dumptokenchain 

This following options are used for this command
  -addr string
        Server/Host Address (default "localhost")
  -port string
        Server/Host port (default "20000")
  -token string
        Token address (default "")

To Migrate Existing Java Node to RubixGo : To dump token chain on the node use this command.

./rubixgoplatform migratenode 

This following options are used for this command
  -port string
        Server/Host port (default "20000")
   -fp 
        Force password to be entered on the terminal

To Add explorer url : To add explorer url where to send the transaction data.

./rubixgoplatform addexplorer

This following options are used for this command
  -links string
        URLs, mutiple URLs will be seprated by comma
  -port string
        Server/Host port (default "20000")

To remove explorer url : To remove explorer url where not to send the transaction data.

./rubixgoplatform removeexplorer

This following options are used for this command
  -links string
        URLs, mutiple URLs will be seprated by comma
  -port string
        Server/Host port (default "20000")

To get all explorer urls : To get explorer urls where the transaction data is being sent.

./rubixgoplatform getallexplorer

This following options are used for this command
  -port string
        Server/Host port (default "20000")

To add the peer details manually : To add the peer details by providing peerID, did and didType of the peer

./rubixgoplatform addpeerdetails

This following options are used for this command
  -port string
        Server/Host port (default "20000")
  
  -peerID string
        Peerd ID
      
  -did string
        DID address (default "")

  -didType int
        DID type (0-Basic Mode, 1-Standard Mode, 2-Wallet Mode, 3-Child Mode, 4-Light Mode) (default 0)

To check details about the token states for which pledging has been done : To check for what token states the pledging has been done, and which tokens are pledged

./rubixgoplatform getpledgedtokendetails

This following options are used for this command
  -port string
        Server/Host port (default "20000")

To check tokenstatehash status : To check if a particular tokenstatehash is exhausted, i.e if it has been transferred further

./rubixgoplatform tokenstatehash

This following options are used for this command
  -port string
        Server/Host port (default "20000")
        
  -tokenstatehash string
        TokenState Hash, for which the status needs to be checked