Version 8.0.2

8.0.2

Dec 1, 2024

Package

FIX

• Changelog for version 8.0.0 says and intended this:

  "The FlexSubThemesData property inputDecoratorIsFilled now default to false when undefined, like Flutter SDK does.
  Set it to true to get the same style it had with previous undefined value."

  Due to a bug, this was not the case. This release fixes the bug and the property now defaults to false when undefined, as intended and documented in version 8.0.0 changelog. FIX: #265

Version 8.0.1

8.0.1

Nov 13, 2024

Package

FIX

• Fixed the version constraint. The V8 package is only compatible with Flutter 3.24.0 and later. It was intended to be compatible with Flutter 3.22.0 and later, but a theming API that is only available in Flutter version 3.24.0 and later made it into the release. If you need a release of version 8 that is also compatible with Flutter 3.22.x, you can use version 8.0.1-dev.3.22 of the package. That package release is identical to this release, but excludes the API not available in Flutter 3.22.0.

Themes Playground

NEW

• Added a quick share button on the side menu. It exports the Playground settings to JSON, makes a URL of it and copies the result to the clip board in one go. Ready to be shared where needed.

CHANGE

• Made changes to the Playground to make it possible to compile it to a Web WASM-GC build. The Playground WASM build is still experimental and not yet published anywhere.

Version 8.0.1-dev.3.22

8.0.1-dev.3.22

Nov 13, 2024

Package

FIX

• This is a special release of FlexColorScheme version 8, it is identical to release 8.0.1, but it removes the locale API from the InputDecorationTheme to keep version 8 compatible with Flutter 3.22.x. If you use Flutter 3.24 or later, you should use the 8.0.0 or later releases instead.

Themes Playground

• Added a quick share button on the side menu. It exports the Playground settings to JSON, makes a URL of it and copies the result to the clip board in one go. Ready to be shared where needed.

Version 8.0.0

Nov 3, 2024

SUMMARY

Version 8.0.0 makes FlexColorScheme fully aligned with Flutter's MAJOR BREAKING Material-3 theming changes introduced in Flutter version 3.22. Due to Flutter 3.22 breaking many past Material styles, introducing new colors to ColorScheme and deprecating three colors, FlexColorScheme had to undergo major revision and also break many of its past styles and some older APIs.

Most APIs are still there and work as before, but a few produce results that differ slightly from past ones, just like Flutter 3.22 also does over previous versions. Generally, the upgrade should be smooth, but you may need to review the produced theme result to see that you don't get any changes that don't fit with your design goals. Some past defaults have changed in FCS V8, but previous settings are still available. However, you will need to enable them explicitly to get the same results as before. The purpose of these default value changes is to make FCS have less opinionated defaults, and be more aligned with Flutter's Material-3 design defaults. The Themes Playground app will still have some of its own opinionated defaults, done via default settings values the app uses in its default configuration, but the package Material-3 default starting points are now much more aligned with Flutter's Material-3 defaults.

In the Themes Playground you can now export and import settings to a JSON file, and import them back into the Playground later. This is a great way to save your theme settings for later re-use. The exported JSON contains all the internal controller settings values you have configured in the Playground app, that are needed to restore a given configuration state. This Playground feature was a nice contribution by GitHub user @akiller in !PR 257, thank you! This contributed feature got enhanced with more error handling and a slightly refined UI to make it production ready. As a further enhancement of the JSON export feature, the Themes Playground app also got the ability to convert the exported settings JSON config to a shareable URL. You can now share Playground settings with other Flutter developers.

MIGRATION

The most critical changes to migrate from FlexColorScheme V7 to V8 are listed below. For a full list of all breaking changes, see PACKAGE CHANGES and the BREAKING part further below.

• The flag useMaterial3 now defaults to true in FlexColorScheme and FlexThemeData constructors. Set it to false to explicitly use Material-2 theming. It defaulted to true before. Material-2 is still fully supported in FCS v8 and Flutter v3.24, but will eventually be deprecated in Flutter, when that happens, it will also happen in FCS.

  With the Themes Playground app, you can use a pre-configured Material-3 based theme that looks very similar to legacy Material-2 design. This will continue to be available also after Material-2 is deprecated in Flutter.

• The FlexSubThemesData properties interactionEffects, tintedDisabledControls, defaultUseM2StyleDividerInM3 and blendOnColors now all default to false. In previous versions they defaulted to true. If you before had not explicitly turned these properties false, they were all true by default. To get the same result as before in FCS V8, you now have to set these properties to true. This change was made to have fewer opinionated defaults in FCS to align it more with Flutter SDK default styles.

• The FlexSubThemesData property navigationRailLabelType no default to NavigationRailLabelType.none. To get the same result as before by default, you will need to set it to NavigationRailLabelType.all. This change was made to have fewer opinionated defaults in FCS to align it more with Flutter SDK default styles. The Playground defaults it to NavigationRailLabelType.all by adding this by default to new default themes.

• Since ColorScheme.background color was deprecated in Flutter 3.22.0 we can no longer use it as a part of surface blends and its modes. For example, when surfaceMode is set to FlexSurfaceMode.highBackgroundLowScaffold it now uses surface and dialog blends set to 2x instead of 1x, so that it represents the "high background" style as before, but done via surface color. Without this breaking change, this mode would produce the same result as FlexSurfaceMode.levelSurfacesLowScaffold and be redundant.

  • NOTE: You may want to check your surface mode and blends to see that they still look as you want them to, as they may have changed slightly depending on your configuration. We have tried to keep required changes subtle, you may not notice any difference, but it is good to check. These changes we forced by Flutter 3.22.0 deprecation of ColorScheme colors background, onBackground and surfaceVariant.

This major release has many breaking changes forced via breaking changes in Flutter 3.22.0. Due to this, the release also uses this opportunity to clean up APIs with opinionated defaults, like the ones mentioned above. There are additional smaller and more subtle changes in defaults values, that align FCS to use the same color defaults from the new ColorScheme colors, that Flutter started using in version 3.22.0 as well. You can find all the details below in the PACKAGE CHANGES chapter.

BACKGROUND

Flutter 3.22 introduced a large number of breaking changes to the ColorScheme and default color mappings that Flutter's Material components use. In total, the Flutter 3.22.0 release adjusted 249 of its own internal tests to accommodate for new Material-3 spec changes, that all broke past Flutter Material-3 component styles. For a reference to the broken and updated tests, see this issue side comment.

FlexColorScheme V8 now allows you to use the new colors introduced in Flutter 3.22. As before, with FCS you can get fully defined hand-tuned ColorSchemes without using Material-3 design's Material Color Utilities (MCU) based seed-generated ColorSchemes. You may prefer to use seed generated ColorSchemes with Material-3, but it is nice to know you do not have to.

To the seed generated ColorSchemes, FCS adds support for all the Flutter DynamicSchemeVariant seed generated variants. It also improves them by allowing you to use separate seed colors for each palette. With Flutter's ColorScheme.fromSeed, you can only seed with one color, the primary color. The resulting ColorScheme always uses computed values for secondary and tertiary palettes, plus a hard coded fixed color for the error palette seeding. Surfaces colors are always tied to primary color as well and include a hint of primary color. With FCS, you do not have these limitations, you can seed with separate colors for each palette with even with Flutter's own dynamic scheme variants. This was always possible with FlexColorScheme and its FlexSeedScheme (FSS) based FlexTones, seed generated scheme variants. FCS now brings this feature to Flutter's own dynamic scheme variants as well.

As before, FCS also has its own even configurable FlexTones way of making seed generated ColorSchemes. Typically, you use predefined FlexTones, but you can also create your own FlexTones configurations. With it, you can define the chroma goals for each palette and define which tone is mapped to what ColorScheme color. An internal example of using them is the implementation of FlexTones modifiers.

FlexColorScheme V8 adds three new FlexTones modifiers. The most useful one is called monochromeSurfaces(). This tone modifier makes the surface shades of any used FlexTones configuration use monochrome greyscale shades for the surface and surface variant palettes. It thus gives us greyscale colors for ALL surfaces, instead of primary-tinted ones. It can be applied to any FlexTones seed generated scheme variant. The other new modifiers are expressiveOnContainer() and higherContrastFixed(). Check the API docs for more details.

PACKAGE CHANGES

This section contains a detailed list of all changes introduced in FlexColorScheme version 8.0.0.

BREAKING CHANGES

This version contains a lot of breaking changes due to updates in the Material-3 ColorScheme in Flutter 3.22. At the same time, this release uses the forced breaking change to clean up some older APIs. FCS is now more aligned with Flutter's Material-3 theming defaults, by typically using them as starting points in the default Material-3 mode. Material-2 mode is still supported, it has its own opinionated defaults as before.

• The ThemeData flag useMaterial3 is now true by default to align with Flutter 3.16.0 and later default for ThemeData. To continue using Material-2 theming, set useMaterial3 to false. All component themes in FlexSubThemes that have a useMaterial3 property now also default to true.

• Keeping to Material-3 defaults, in the theme factories light and dark, if scheme is undefined it now defaults to FlexScheme.materialBaseline the Material-3 baseline scheme, when useMaterial3 is true. If useMaterial3 is false and schemeis undefined, it defaults to FlexScheme.material, the default Material-2 theme, as before.

• Removed ALL references to in Flutter 3.22 deprecated ColorScheme colors background, onBackground and surfaceVariant. They are not used in FCS anymore. The background color was critical for FCS surface blending, it is now handled differently. The removal of these ColorScheme colors had far-reaching, but typically still subtle implications on styles created by FCS. There are many breaking minor style changes in this release due to this. Here are the critical changes caused by all these breaking changes in Flutter 3.22:...

Version 8.0.0-dev.2

8.0.0-dev.2

Oct 26, 2024

SUMMARY

Version 8.0.0 makes FlexColorScheme fully aligned with Flutter's MAJOR BREAKING Material-3 theming changes introduced in Flutter version 3.22. Due to Flutter 3.22 breaking many past Material styles, introducing new colors to ColorScheme and deprecating three colors, FlexColorScheme had to undergo major revision and also break many of its past styles and some older APIs.

Most APIs are still there and work as before, but a few produce results that differ slightly from past ones, just like Flutter 3.22 also does over previous versions. Generally, the upgrade should be smooth, but you may need to review the produced theme result to see that you don't get any changes that don't fit with your design goals. Some past defaults have changed in FCS V8, but previous values are still available. You will need to enable them explicitly to get the same results as before. The purpose of these default value changes is to make FCS have less opinionated defaults, and be more aligned with Flutter's Material-3 design defaults. The Themes Playground app will still have some of its own opinionated defaults, done via default settings values the app uses in its default configuration, but the package Material-3 default starting points, are now much more aligned with Flutter's Material-3 defaults.

In the Themes Playground you can now export and import settings to a JSON file, and import them back into the Playground later. This is a great way to save your theme settings for later re-use. The exported JSON contains all the internal controller settings values you have configured in the Playground app, that are needed to restore a given configuration state. This Playground feature was a nice contribution by GitHub user @akiller in !PR 257, thank you!
This contributed feature got enhanced with more error handling and a slightly refined UI to make it production ready. It can now be tried for the first time in the 8.0.0-dev.2 release and build. As a further enhancement of the JSON export feature, the Themes Playground app also got the ability to convert the exported settings JSON config to a shareable URL. You can now share Playground settings with other Flutter developers.

MIGRATION

The most critical changes to migrate from FlexColorScheme V7 to V8 are listed below. For a full list of all breaking changes, see PACKAGE CHANGES and the BREAKING part further below.

• The flag useMaterial3 now defaults to true in FlexColorScheme and FlexThemeData constructors. Set it to false to explicitly use Material-2 theming. It defaulted to true before. Material-2 is still fully supported in FCS v8 and Flutter v3.24, but will eventually be deprecated in Flutter, when that happens, it will also happen in FCS.

  With the Themes Playground app, you can use a pre-configured Material-3 based theme that looks very similar to legacy Material-2 design. This will continue to be available also after Material-2 is deprecated in Flutter.

• The FlexSubThemesData properties interactionEffects, tintedDisabledControls, defaultUseM2StyleDividerInM3 and blendOnColors now all default to false. In previous versions they defaulted to true. If you before had not explicitly turned these properties false, they were all true by default. To get the same result as before in FCS V8, you now have to set these properties to true. This change was made to have fewer opinionated defaults in FCS to align it more with Flutter SDK default styles.

• The FlexSubThemesData property navigationRailLabelType no default to NavigationRailLabelType.none. To get the same result as before by default, you will need to set it to NavigationRailLabelType.all. This change was made to have fewer opinionated defaults in FCS to align it more with Flutter SDK default styles. The Playground defaults it to NavigationRailLabelType.all by adding this by default to new default themes.

• Since ColorScheme.background color was deprecated in Flutter 3.22.0 we can no longer use it as a part of surface blends and its modes. For example, when surfaceMode is set to FlexSurfaceMode.highBackgroundLowScaffold it now uses surface and dialog blends set to 2x instead of 1x, so that it represents the "high background" style as before, but done via surface color. Without this breaking change, this mode would produce the same result as FlexSurfaceMode.levelSurfacesLowScaffold and be redundant.

  • NOTE: You may want to check your surface mode and blends to see that they still look as you want them to, as they may have changed slightly depending on your configuration. We have tried to keep required changes subtle, you may not notice any difference, but it is good to check. These changes we forced by Flutter 3.22.0 deprecation of ColorScheme colors background, onBackground and surfaceVariant.

This major release has many breaking changes forced via breaking changes in Flutter 3.22.0. Due to this, the release also uses this opportunity to clean up APIs with opinionated defaults, like the ones mentioned above. There are additional smaller and more subtle changes in defaults values, that align FCS to use the same color defaults from the new ColorScheme colors, that Flutter started using in version 3.22.0 as well. You can find all the details below in the PACKAGE CHANGES chapter.

BACKGROUND

Flutter 3.22 introduced a large number of breaking changes to the ColorScheme and default color mappings that Flutter's Material components use. In total, the Flutter 3.22.0 release adjusted 249 of its own internal tests to accommodate for new Material-3 spec changes, that all broke past Flutter Material-3 component styles. For a reference to the broken and updated tests, see this issue side comment.

FlexColorScheme V8 now allows you to use the new colors introduced in Flutter 3.22. As before, with FCS you can get fully defined hand-tuned ColorSchemes without using Material-3 design's Material Color Utilities (MCU) based seed-generated ColorSchemes. You may prefer to use seed generated ColorSchemes with Material-3, but it is nice to know you do not have to.

To the seed generated ColorSchemes, FCS adds support for all the Flutter DynamicSchemeVariant seed generated variants. It also improves them by allowing you to use separate seed colors for each palette. With Flutter's ColorScheme.fromSeed, you can only seed with one color, the primary color. The resulting ColorScheme always uses computed values for secondary and tertiary palettes, plus a hard coded fixed color for the error palette seeding. Surfaces colors are always tied to primary color as well and include a hint of primary color. With FCS, you do not have these limitations, you can seed with separate colors for each palette with even with Flutter's own dynamic scheme variants. This was always possible with FlexColorScheme and its FlexSeedScheme (FSS) based FlexTones, seed generated scheme variants. FCS now brings this feature to Flutter's own dynamic scheme variants as well.

As before, FCS also has its own even configurable FlexTones way of making seed generated ColorSchemes. Typically, you use predefined FlexTones, but you can also create your own FlexTones configurations. With it, you can define the chroma goals for each palette and define which tone is mapped to what ColorScheme color. An internal example of using them is the implementation of FlexTones modifiers.

FlexColorScheme V8 adds three new FlexTones modifiers. The most useful one is called monochromeSurfaces(). This tone modifier makes the surface shades of any used FlexTones configuration use monochrome greyscale shades for the surface and surface variant palettes. It thus gives us greyscale colors for ALL surfaces, instead of primary-tinted ones. It can be applied to any FlexTones seed generated scheme variant. The other new modifiers are expressiveOnContainer() and higherContrastFixed(). Check the API docs for more details.

TODOS BEFORE STABLE RELEASE

• TODO: Flutter 3.22 broke +300 tests in FCS 7.3.1, review and fix them after all updates.
  • New features and adapting FCS to Flutter 3.22 also broke many tests.
  • Update and review all tests.
    • Test fix status:
      • At quality assurance start, 309 tests to fix
      • Now 59 tests remain to fix.
      • Of at start total 2103 tests, and now 2189 total tests.
      • Coverage is now at 94%.
    • Add tests for new features. Get the FCS package back to 100% test coverage.
  • Will release 8.0.0-dev releases without all test fixes and updates to them, to test the release WEB build and to offer early access to V8 and try new features.

• TODO: Study and potentially report 14 found new Flutter SDK theming issues. Report if not already existing and if they are still valid after check on master using a simple reproduction sample. Add issue GitHub links to known issue expands in the Playground app and to package doc comments, as well as code TODOs where relevant.

MINOR KNOWN ISSUES

• Playground: Cancelling input colors from custom theme get reset to active ColorScheme, not to input values.
  • This is a bug in the Playground app. It should reset them to the input values, not to the active ColorScheme values. It now changes the underlying input color to the scheme and not back to the input value it had when we cancel color editing. We do not see this faulty change in the effective theme, but if we change theme modifiers, we no longer have the original input color. If we show the input colors, we can easily observe this bug. This bug is not new, it has existed a long time.
    ...

Version 8.0.0-dev.1

Changelog

All changes to the FlexColorScheme (FCS) package are documented here.

8.0.0-dev.1

Oct 14, 2024

SUMMARY

Version 8.0.0 makes FlexColorScheme fully aligned with Flutter's MAJOR BREAKING Material-3 theming changes introduced in Flutter version 3.22. Due to Flutter 3.22 breaking many past Material styles, introducing new colors to ColorScheme and deprecating three colors, FlexColorScheme had to undergo major revision and also break many of its past styles and some older APIs.

Most APIs are still there and work as before, but a few produce results that differ slightly from past ones, just like Flutter 3.22 also does over previous versions. Generally, the upgrade should be smooth, but you may need to review the produced theme result to see that you don't get any changes that don't fit with your design goals. Some past defaults have changed in FCS V8, but previous values are still available. You will need to enable them explicitly to get the same results as before. The purpose of these default value changes is to make FCS have less opinionated defaults, and be more aligned with Flutter's Material-3 design defaults. The Themes Playground app will still have some of its own opinionated defaults, done via default settings values the app uses in its default configuration, but the package Material-3 default starting points, are now much more aligned with Flutter's Material-3 defaults.

MIGRATION

The most critical changes to migrate from FlexColorScheme V7 to V8 are listed below. For a full list of all breaking changes, see PACKAGE CHANGES and the BREAKING part further below.

• The flag useMaterial3 now defaults to true in FlexColorScheme and FlexThemeData constructors. Set it to false to explicitly use Material-2 theming. It defaulted to true before. Material-2 is still fully supported in FCS v8 and Flutter v3.24, but will eventually be deprecated in Flutter, when that happens, it will also happen in FCS.

  With the Themes Playground app, you can use a pre-configured Material-3 based theme that looks very similar to legacy Material-2 design. This will continue to be available also after Material-2 is deprecated in Flutter.

• The FlexSubThemesData properties interactionEffects, tintedDisabledControls, defaultUseM2StyleDividerInM3 and blendOnColors now all default to false. In previous versions they defaulted to true. If you before had not explicitly turned these properties false, they were all true by default. To get the same result as before in FCS V8, you now have to set these properties to true. This change was made to have fewer opinionated defaults in FCS to align it more with Flutter SDK default styles.

• The FlexSubThemesData property navigationRailLabelType no default to NavigationRailLabelType.none. To get the same result as before by default, you will need to set it to NavigationRailLabelType.all. This change was made to have fewer opinionated defaults in FCS to align it more with Flutter SDK default styles. The Playground defaults it to NavigationRailLabelType.all by adding this by default to new default themes.

• Since ColorScheme.background color was deprecated in Flutter 3.22.0 we can no longer use it as a part of surface blends and its modes. For example, when surfaceMode is set to FlexSurfaceMode.highBackgroundLowScaffold it now uses surface and dialog blends set to 2x instead of 1x, so that it represents the "high background" style as before, but done via surface color. Without this breaking change, this mode would produce the same result as FlexSurfaceMode.levelSurfacesLowScaffold and be redundant.

  • NOTE: You may want to check your surface mode and blends to see that they still look as you want them to, as they may have changed slightly depending on your configuration. We have tried to keep required changes subtle, you may not notice any difference, but it is good to check. These changes we forced by Flutter 3.22.0 deprecation of ColorScheme colors background, onBackground and surfaceVariant.

This major release has many breaking changes forced via breaking changes in Flutter 3.22.0. Due to this, the release also uses this opportunity to clean up APIs with opinionated defaults, like the ones mentioned above. There are additional smaller and more subtle changes in defaults values, that align FCS to use the same color defaults from the new ColorScheme colors, that Flutter started using in version 3.22.0 as well. You can find all the details below in the PACKAGE CHANGES chapter.

BACKGROUND

Flutter 3.22 introduced a large number of breaking changes to the ColorScheme and default color mappings that Flutter's Material components use. In total, the Flutter 3.22.0 release adjusted 249 of its own internal tests to accommodate for new Material-3 spec changes, that all broke past Flutter Material-3 component styles. For a reference to the broken and updated tests, see this issue side comment.

FlexColorScheme V8 now allows you to use the new colors introduced in Flutter 3.22. As before, with FCS you can get fully defined hand-tuned ColorSchemes without using Material-3 design's Material Color Utilities (MCU) based seed-generated ColorSchemes. You may prefer to use seed generated ColorSchemes with Material-3, but it is nice to know you do not have to.

To the seed generated ColorSchemes, FCS adds support for all the Flutter DynamicSchemeVariant seed generated variants. It also improves them by allowing you to use separate seed colors for each palette. With Flutter's ColorScheme.fromSeed, you can only seed with one color, the primary color. The resulting ColorScheme always uses computed values for secondary and tertiary palettes, plus a hard coded fixed color for the error palette seeding. Surfaces colors are always tied to primary color as well and include a hint of primary color. With FCS, you do not have these limitations, you can seed with separate colors for each palette with even with Flutter's own dynamic scheme variants. This was always possible with FlexColorScheme and its FlexSeedScheme (FSS) based FlexTones, seed generated scheme variants. FCS now brings this feature to Flutter's own dynamic scheme variants as well.

As before, FCS also has its own even configurable FlexTones way of making seed generated ColorSchemes. Typically, you use predefined FlexTones, but you can also create your own FlexTones configurations. With it, you can define the chroma goals for each palette and define which tone is mapped to what ColorScheme color. An internal example of using them is the implementation of FlexTones modifiers.

FlexColorScheme V8 adds three new FlexTones modifiers. The most useful one is called monochromeSurfaces(). This tone modifier makes the surface shades of any used FlexTones configuration use monochrome greyscale shades for the surface and surface variant palettes. It thus gives us greyscale colors for ALL surfaces, instead of primary-tinted ones. It can be applied to any FlexTones seed generated scheme variant. The other new modifiers are expressiveOnContainer() and higherContrastFixed(). Check the API docs for more details.

TODOS BEFORE STABLE RELEASE

• TODO: Flutter 3.22 broke +150 tests in FCS 7.3.1, review and fix them after all updates.
  • New features and adapting FCS to Flutter 3.22 also intentionally introduced more breakage. Currently, 309 tests of 2097 are broken.
  • Update and review all tests. Add tests for new features. Get the FCS package back to 100% test coverage.
  • Will release 8.0.0-dev releases without all test fixes and updates to them, to test the release WEB build and offer them as early access.

• TODO: Study and potentially report 14 found new Flutter SDK theming issues. Report if not already existing and if they are still issues after check on master using a simple reproduction sample. Add issue GitHub links to known issue expands in the Playground and to package doc comments and code TODOs where relevant.

MINOR KNOWN ISSUES

• Package: The toScheme method may need some updates for the raw FlexColorScheme? constructor to not provide surprises

  • Theming and toScheme works as intended with light/dark factories. This update would only be for a better raw constructor result. The raw constructor is not supposed to be used directly, so any gaps are not really that relevant.

• Playground: Cancelling input colors from custom theme get reset to active ColorScheme, not to input values.

  • This is a bug in the Playground app. It should reset them to the input values, not to the active ColorScheme values. While this kind of buggy behavior is a bit easier to understand visually, it does change the underlying input color to the scheme and not back to its input it had when we cancel. We do not see this faulty change in the effective theme, but if we change theme modifiers, we no longer have the original input color. If we show the input colors, we can more easily observe this bug.

COMPLETED CRITICAL CHANGES

• DONE: Consider what to do with surfaceTint removal.
  • It is basically obsolete now in Flutter 3.22 and later.
  • Will keep it around for now, but added info about it being obsolete in Flutter 3.22 or later, in its info-expands.
• DONE: Consider what to do with shadows back.
  • Keep and add more fine-grained control later, via shadow color selection per component.
• DONE: Generate full ColorScheme in Themes Playground, also when not seeding. Need all "fixed" and "fixedDim" colors.
  • This was tricky, big rework and new features.
• DONE: Figure out how to handle background not existing in ColorScheme; it was critical in FCS for its surface blends....

Version 7.3.1

7.3.1

August 17, 2023

• FIX: Themes Playground: Update the in-app documentation of known Flutter issues to reflect changes brought by Flutter 3.13.
• FIX: Changelog 7.3.0 typos and style corrections by @TahaTesser.

Version 7.3.0

7.3.0

August 16, 2023

This release uses new features in Material-3 theming that are only available in Flutter 3.13 or later. It thus requires minimum Flutter 3.13.0.

In the next Flutter stable release after 3.13, Flutter will change the ThemeData.useMaterial3 default from false to true. In other words, applications using FCS will get the Material-3 colors, text styles, and other visuals, by default. The FlexColorScheme API will then be following along with this breaking change. In this release the FlexColorScheme API useMaterial3 still defaults to false. The Themes Playground app has for quite some time already defaulted to setting the value to true. Which is also already the case in Flutter when you create a new application with flutter create.

PACKAGE

NEW

• To FlexSubThemes in buttonTheme added bool alignedDropdown.

• To FlexSubThemesData added bool alignedDropdown. Setting it to true improves the style of the DropdownButton and the DropdownButtonForField. They no longer expand outside the width of the parent dropdown button but are kept size aligned with it.

• To FlexSubThemes in:

  • chipTheme added TextStyle secondaryLabelStyle
  • dialogTheme added TextStyle titleTextStyle and contentTextStyle
  • floatingActionButtonTheme added TextStyle extendedTextStyle
  • menuButtonTheme added TextStyle textStyle
  • snackBarTheme added TextStyle contentTextStyle
  • timePickerTheme added TextStyle dayPeriodTextStyle, dialTextStyle, helpTextStyle and hourMinuteTextStyle
  • toggleButtonsTheme added TextStyle textStyle

• The TextStyle additions above, to mentioned FlexSubThemes, do not yet bring any new features usable via FlexColorScheme theming APIs. They are a preparation for adding more component TextStyles to FlexSubThemesData. This in turn, will enable more direct TextStyle theming via FlexColorScheme API without using copyWith to override produced ThemeData.

• As planned in previous versions, made the FlexSubThemesData.useInputDecoratorThemeInDialogs apply also to DatePickerDialog and not only to TimePickerDialog. This feature is not optimally supported by the framework. The current implementation has severe limitations. See more info in PR #128950 comment. For more information about the differences in how InputDecorationTheme behaves in different component themes, read the proposal "Make InputDecorationTheme usage in components consistent" in issue #131666.

CHANGE

• Minor style breaking changes:

• FlexSubThemes.dropdownMenuTextStyle now default to TextTheme.bodyLarge if not defined. Previously it used Flutter SDK default TextTheme.bodyLarge, which is a poor design default as the style does not fit with default style bodyLarge used as default style in TextFieldin M3 mode. See issue #131350 that contains a mention of this style deviant. In Jetpack compose, the DropdownMenu and its TextField part correctly defaults to using bodyLarge, this is thus assumed to be the correct spec wise. The issue of wrong default text styles in Flutter menus is further discussed in issue #131676. FlexColorScheme will not internally correct the wrong default TextStyle on menu items, it will however change to follow the default when Flutter stable does. The difference in the DropdownMenu text input field was however significant enough to warrant a change already before the fix lands in Flutter stable.

FIX

• Fixed the FlexSubThemes.checkboxTheme that broke due to an unexpected breaking change in Flutter 3.13 caused by PR #125643. The breaking change is discussed further in issue #130295. The fix to the checkbox theme incorporates the new behavior to keep its custom styling working as before and expected.

• Fixed useInputDecoratorThemeInDialogs not working for some properties in the InputDecorator, when the value was null or false, where some properties in the TextFields in the TimePickerDialog did not revert back to default styles. Now they do, but via hard defined values to mimic the default M3 style, as that is the only way to get back to it when a very custom themeData.inputDecoratorTheme is being used.

THEMES PLAYGROUND

NEW

• The PopupMenu and Dropdowns panel got a setting for older Material-2 based DropdownButtonFormField and DropdownButton to set the new alignment property, which is an ancient theming property in the old ButtonThemeData that was used by deprecated and removed Material Buttons, but the theme is still used by these buttons.

• On the TextField panel, added a feature to set the input decoration style back to FlexColorScheme's own defaults.

CHANGE

• Harmonized custom color activation settings on Theme Colors and Seeded ColorScheme.

• Removed old switch in custom colors in dark mode, that was used to enable using input scheme color as own seed colors in dark mode when using custom colors. For simplicity, the custom dark mode colors have been used directly as seed colors in a few releases in the Playground already. The control was an old left-over with no function anymore.

• The global themed input decorator usage is now on by default for TimePickerdialog and DatePickerdialog. This is the only style currently supported for DatePickerDialog in Flutter, so it makes sense to keep it on by default. Turning it OFF for now only removes the custom, input decorator style from the TimePickerDialog. Despite the new feature in Flutter SDK, it cannot be removed from the DatePickerDialog. This is discussed in PR #128950 comment. Additional info is also available in Flutter issue #131666.

FIX

• Fixed the old default color info for the toggles Switch, Checkbox and Radio, that are shown when FlexColorScheme is disabled as default values in Material 2 dark mode. They have been updated in Flutter SDK to ColorScheme.secondary color and are no longer not the horrid dark mode teal color. This default color info, shown when FlexColorScheme is disabled in the Themes Playground, had not been updated for the dark M2 mode Switch, Checkbox and Radio colors.

Version 7.2.0

7.2.0

July 20, 2023

PACKAGE

NEW

• Added boolean property switchThumbFixedSize to FlexSubThemesData. When set to true, the Material-3 Switch themed thumb size is same size when Switch is ON and OFF. When the property value is false or undefined, it retains its default behavior and the thumb is smaller when the switch is OFF. Only has any impact in Material-3 mode.
• Added FlexAdaptive property adaptiveRemoveNavigationBarTint to FlexSubThemesData. It is used to control platform adaptive elevation tint removal on the NavigationBar theme.
• Added textSelectionTheme to FlexSubThemes, used to make a TextSelectionThemeData.
• Added properties inputCursorSchemeColor, inputSelectionSchemeColor, inputSelectionOpacity, and inputSelectionHandleSchemeColor, to FlexSubThemesData used to configure TextSelectionThemeData as a part of FlexColorScheme.subThemesData.
• Added a new feature that enables platform adaptive Material ink selection via adaptiveSplash a FlexAdaptive property, and the FlexSplashType values splashType and splashTypeAdaptive in FlexSubThemesData.
• FlexColorScheme got the splashFactory property, which can be used to override any splash type setting in FlexSubThemesData. This addition also removes the need to do a copy with on ThemeData to provide a custom splashFactory. Prefer using the FlexSubThemesData properties splashType and splashTypeAdaptive to control the selection of used ink factory together with adaptiveSplash, unless you have written a custom ink factory that you want to use, in which case using the splashFactory override is appropriate.
• New feature that enable platform adaptive theming of border radius on dialogs via adaptiveDialogRadius a FlexAdaptive property and double dialogRadiusAdaptive in FlexSubThemesData.
• Added tinted disable support when FlexSubThemesData.tintedDisabledControls is true to FilledButton and FilledButton.tonal. They have the same disabled style when not tinted, so we can do the same to their tinted variants. Even if we still cannot theme them to have different themed colors when enabled, due to issue #118063, we can still theme their disabled state with tint when the option is used.
• Added tinted disable support when FlexSubThemesData.tintedDisabledControls is true to IconButton, IconButton.filled, IconButton.filledTonal and IconButton.outlined foreground colors. They have the same disabled foreground style when not tinted, so we can do the same to their tinted foreground color variants. We still cannot theme them to have different themed background colors when disabled, or at all when enabled, due to issue #118063. We can only theme their disabled foreground color state with tint when the option is used.

CHANGE

• Updated to use version 1.4.0 of FlexSeedScheme offering two new FlexTones and extended tonal palette.

• Minor style breaking changes:

• Removed elevation tint impact of general FlexSubThemesData.adaptiveRemoveElevationTint setting, from the NavigationBar component. It instead has its own setting in FlexSubThemesData.adaptiveRemoveNavigationBarTint, that can be used independently of the general tint removal setting. This was done since it may be preferred to not remove the elevation tint from the NavigationBar, even when otherwise doing so on selected platforms.

• In M2 mode, when not using sub-theme, ThemeData.textSelectionTheme it now gets a default TextSelectionThemeData() and its themed style defaults to SDK defaults. Enable and use sub-themes and its new theming features to style it further.

  • In previous versions in M2 mode, text selection handles used Theme.of(context).primaryColorDark, even when sub-themes where not enabled. They still do by default, but only when sub-themes are enabled.

• In both M2 and M3 mode bottomNavigationBarElevation in FlexSubThemesData and elevation in FlexSubThemes.bottomNavigationBar when undefined, now default to elevation 3, giving the BottomNavigationBar a default elevation of 3 when using FlexColorScheme.

  • Previously default elevation was zero. Flutter SDK defaults to 8. The FlexColorScheme opinionated default value was changed to 3 to make it equal to the default elevation of NavigationBar in M3 mode, so that the bottom navigators share same default elevation when using FlexColorScheme. As before, you can adjust the elevation as needed with the API and in the Themes Playground.

• In M2 mode navigationBarElevation in FlexSubThemesData and elevation in FlexSubThemes.navigationBarTheme when undefined, now default to elevation 3, giving the NavigationBar a default elevation of 3 in M2 mode when using FlexColorScheme.

  • Previously default elevation was zero. Flutter SDK defaults to 0. The FlexColorScheme opinionated default value was changed to 3 to make it equal to the default elevation of NavigationBar in M3 mode, so that the bottom navigators share same default elevation when using FlexColorScheme. As before, you can adjust the elevation as needed with the API and in the Themes Playground.

• In M2 mode, bottomAppBarElevation when undefined, now also remains undefined in FlexSubThemes.bottomAppBarTheme causing default elevation in M2 mode to become 8 like in the SDK default for M2.

  • Previous default used same elevation as AppBar, when bottomAppBarElevation was undefined, or 0 if AppBar's elevation was also undefined. The rationale for removal of this default behavior is to start cleaning out opinionated behavior that no longer makes sense to keep around, especially since eventually M2 mode is going away in Flutter.
  • The default for M3 mode is unchanged, using elevation 3, via SDK defaults when undefined.

• In M2 mode, ElevatedButton, FilledButton, FilledButton.tonal, OutlinedButton, TextButton and ToggleButtons now default to border radius 40 dp. Previously they defaulted to 20 dp. Their style is intended to match the used Stadium border design in M3, which is still the default in M3 mode. When using very tall buttons, the 20 dp default value was not enough to keep the buttons looking Stadium shaped as intended in FCS M2 mode.

FIX

• Fixed that TextSelectionThemeData did not automatically use colors that matched and followed subThemes.inputDecoratorSchemeColor when it was modified and text selection colors were not explicitly defined. The text selection, cursor and text selection handles should follow the input decoration's base color by default when they are not defined separately. Defining text selection colors was not possible before version 7.2.0, but defining input decoration colors was, but text selection remained using primary. Now they by default follow the input decoration color, but can also be separately defined via new features in version 7.2.0.
  • Known limitation: Text selection handles on iOS platform cannot be changed with a theme from primary color. So on iOS their themed color is always colorScheme.primary. The text selection color and cursor color do follow the theme also on iOS.
• Fixed useFlutterDefaults when elevation is null in FlexSubThemes.bottomNavigationBar not using Flutter SDK default elevation of 8.
• Added a built-in theme fix to make the elevation tint change in the AppBar animate when it changes. Based on Material spec and observed native Android behavior and compose behavior, the AppBar color change when it is scrolled under should animate. Flutter M3 apps do not do this, the color change is instant. Discovered a theme workaround that makes it animate. This is now always used in FCS themes until Flutter includes its own fix for it.
• The FlexSubThemes.menuButtonTheme and the MenuButtonThemeData it makes, got a style value, where ButtonStyle.animationDuration is always Duration.zero. This solved the issue reported in issue #123615. Consequently, there is no need for a fix for the issue, since it could be solved with a theme property.

THEMES PLAYGROUND

NEW

• In the Switch Check Radio panel, the Switch got a setting to control if thumb is fixed sized or not.
• The NavigationBar got its own setting for elevation tint removal in light and dark mode.
• Introduction text updated. New information about Material-3 design becoming the default in Flutter SDK soon added, and that Material-2 will be deprecated.
• Added text selection theming to the Text Field panel. By default, cursor color, text selection color and text selection handles, default to following the input decorator default color or its selected color. The cursor color, text selection, and text selection handle colors, can also be overridden and defined separately. These settings for light and dark mode, have their own property values in the Playground.
• Added support for selecting a custom ink splash effect and another custom platform adaptive splash effect on selected other platforms.
• Added support for configuring the used VisualDensity. When using mock platform setting in the Playground, it also affects the result of used setting when VisualDensity.adaptivePlatformDensity, FlexColorScheme.comfortablePlatformDensity or default undefined value, that falls back to VisualDensity.adaptivePlatformDensity, are used.
• Added support for selecting and using FlexTones.candyPop and FlexTones.chroma.
• Added support for making any seed strategy use tone 100 (white) or tone 0 (black) as resulting surface and background tones.
• Added an option to show the new extended tonal palette tones to the seeded color scheme panel.
• Shape and radius now have their own theming topic panel, removed radius from Component Themes topic.
• Add adaptive border...

Version 7.1.2

7.1.2

May 17, 2023

PACKAGE

FIX

• SubThemes ElevatedButton in M3 mode, when using elevatedButtonSecondarySchemeColor and there was no value defined on elevatedButtonSchemeColor it resulted in wrong color being used as default for elevatedButtonSchemeColor. Issue and test fixed.

CHORE

• Updated Android runner included for all the examples. The previous one no longer worked with Flutter 3.10, and its used Kotlin version. With included updated version, the examples can be built as Android apps again.