Open5GS 5GC & UERANSIM UE / RAN Sample Configuration - eUPF(eBPF/XDP UPF)

This describes a simple configuration for working Open5GS 5GC and eUPF(eBPF/XDP UPF). In particular, see here for eUPF.

Sample Configurations and Miscellaneous for Mobile Network

Overview of Open5GS 5GC Simulation Mobile Network
Changes in configuration files of Open5GS 5GC, eUPF and UERANSIM UE / RAN
Network settings of Open5GS 5GC, eUPF and UERANSIM UE / RAN
- Network settings of eUPF and Data Network Gateway
Build Open5GS, eUPF and UERANSIM
Run Open5GS 5GC, eUPF and UERANSIM UE / RAN
Ping google.com
- Case for going through DN 10.45.0.0/16
Changelog (summary)

Overview of Open5GS 5GC Simulation Mobile Network

This describes a simple configuration of C-Plane, eBPF/XDP UPF and Data Network Gateway for Open5GS 5GC. Note that this configuration is implemented with Virtualbox VMs.

The following minimum configuration was set as a condition.

One UPF and Data Network Gateway
One UE and one DNN

The built simulation environment is as follows.

The 5GC / eBPF/XDP UPF / UE / RAN used are as follows.

5GC - Open5GS v2.7.0 (2024.03.24) - https://github.com/open5gs/open5gs
eBPF/XDP UPF - eUPF v0.6.1 (2024.01.25) - https://github.com/edgecomllc/eupf
UE / RAN - UERANSIM v3.2.6 (2024.03.08) - https://github.com/aligungr/UERANSIM

Each VMs are as follows.

VM	SW & Role	IP address	OS	CPU (Min)	Memory (Min)	HDD (Min)
VM1	Open5GS 5GC C-Plane	192.168.0.111/24	Ubuntu 22.04	1	2GB	20GB
VM-UP	eUPF U-Plane	192.168.0.151/24	Ubuntu 22.04	1	2GB	20GB
VM-DN	Data Network Gateway	192.168.0.152/24	Ubuntu 22.04	1	1GB	10GB
VM2	UERANSIM RAN (gNodeB)	192.168.0.131/24	Ubuntu 22.04	1	1GB	10GB
VM3	UERANSIM UE	192.168.0.132/24	Ubuntu 22.04	1	1GB	10GB

The network interfaces of each VM are as follows.

VM	Device	Network Adapter	IP address	Interface	XDP
VM1	enp0s3	NAT(default)	10.0.2.15/24	(VM default NW)	--
	enp0s8	Bridged Adapter	192.168.0.111/24	(Mgmt NW)	--
	enp0s9	NAT Network	192.168.14.111/24	N4	--
VM-UP	~~enp0s3~~	~~NAT(default)~~	~~10.0.2.15/24~~	~~(VM default NW)~~ down	--
	enp0s8	Bridged Adapter	192.168.0.151/24	(Mgmt NW)	--
	enp0s9	NAT Network	192.168.13.151/24	N3	x
	enp0s10	NAT Network	192.168.14.151/24	N4	--
	enp0s16	NAT Network	192.168.16.151/24	N6	x
VM-DN	enp0s3	NAT(default)	10.0.2.15/24	(VM default NW)	--
	enp0s8	Bridged Adapter	192.168.0.152/24	(Mgmt NW)	--
	enp0s9	NAT Network	192.168.16.152/24	N6, default GW for VM-UP	--
VM2	enp0s3	NAT(default)	10.0.2.15/24	(VM default NW)	--
	enp0s8	Bridged Adapter	192.168.0.131/24	(Mgmt NW)	--
	enp0s9	NAT Network	192.168.13.131/24	N3	--
VM3	enp0s3	NAT(default)	10.0.2.15/24	(VM default NW)	--
	enp0s8	Bridged Adapter	192.168.0.132/24	(Mgmt NW)	--

NAT networks of Virtualbox are as follows.

Network Name	Network CIDR
N3	192.168.13.0/24
N4	192.168.14.0/24
N6	192.168.16.0/24

Subscriber Information (other information is the same) is as follows.
Note. Please select OP or OPc according to the setting of UERANSIM UE configuration file.

UE	IMSI	DNN	OP/OPc
UE	001010000000000	internet	OPc

I registered these information with the Open5GS WebUI. In addition, 3GPP TS 35.208 "4.3 Test Sets" is published by 3GPP as test data for the 3GPP authentication and key generation functions (MILENAGE).

The DN is as follows.

DN	DNN	TUNnel interface of UE
10.45.0.0/16	internet	uesimtun0

Changes in configuration files of Open5GS 5GC, eUPF and UERANSIM UE / RAN

Please refer to the following for building Open5GS, eUPF and UERANSIM respectively.

Open5GS v2.7.0 (2024.03.24) - https://open5gs.org/open5gs/docs/guide/02-building-open5gs-from-sources/
eUPF v0.6.1 (2024.01.25) - https://github.com/s5uishida/install_eupf
UERANSIM v3.2.6 (2024.03.08) - https://github.com/aligungr/UERANSIM/wiki/Installation

Changes in configuration files of Open5GS 5GC C-Plane

The following parameters can be used in the logic that selects UPF as the connection destination by PFCP.

DNN
TAC (Tracking Area Code)
nr_CellID

For the sake of simplicity, I used only DNN this time.

open5gs/install/etc/open5gs/amf.yaml

--- amf.yaml.orig       2024-03-24 15:36:48.000000000 +0900
+++ amf.yaml    2024-03-24 20:19:57.528590659 +0900
@@ -19,27 +19,27 @@
         - uri: http://127.0.0.200:7777
   ngap:
     server:
-      - address: 127.0.0.5
+      - address: 192.168.0.111
   metrics:
     server:
       - address: 127.0.0.5
         port: 9090
   guami:
     - plmn_id:
-        mcc: 999
-        mnc: 70
+        mcc: 001
+        mnc: 01
       amf_id:
         region: 2
         set: 1
   tai:
     - plmn_id:
-        mcc: 999
-        mnc: 70
+        mcc: 001
+        mnc: 01
       tac: 1
   plmn_support:
     - plmn_id:
-        mcc: 999
-        mnc: 70
+        mcc: 001
+        mnc: 01
       s_nssai:
         - sst: 1
   security:

open5gs/install/etc/open5gs/nrf.yaml

--- nrf.yaml.orig       2024-03-24 15:36:48.000000000 +0900
+++ nrf.yaml    2024-03-24 20:58:02.421044544 +0900
@@ -10,8 +10,8 @@
 nrf:
   serving:  # 5G roaming requires PLMN in NRF
     - plmn_id:
-        mcc: 999
-        mnc: 70
+        mcc: 001
+        mnc: 01
   sbi:
     server:
       - address: 127.0.0.10

open5gs/install/etc/open5gs/smf.yaml

--- smf.yaml.orig       2024-03-24 15:36:48.000000000 +0900
+++ smf.yaml    2024-03-31 23:04:10.006701658 +0900
@@ -19,35 +19,31 @@
         - uri: http://127.0.0.200:7777
   pfcp:
     server:
-      - address: 127.0.0.4
+      - address: 192.168.14.111
     client:
       upf:
-        - address: 127.0.0.7
-  gtpc:
-    server:
-      - address: 127.0.0.4
+        - address: 192.168.14.151
+          dnn: internet
   gtpu:
     server:
-      - address: 127.0.0.4
+      - address: 192.168.14.111
   metrics:
     server:
       - address: 127.0.0.4
         port: 9090
   session:
     - subnet: 10.45.0.1/16
-    - subnet: 2001:db8:cafe::1/48
+      dnn: internet
   dns:
     - 8.8.8.8
     - 8.8.4.4
-    - 2001:4860:4860::8888
-    - 2001:4860:4860::8844
   mtu: 1400
 #  p-cscf:
 #    - 127.0.0.1
 #    - ::1
 #  ctf:
 #    enabled: auto   # auto(default)|yes|no
-  freeDiameter: /root/open5gs/install/etc/freeDiameter/smf.conf
+#  freeDiameter: /root/open5gs/install/etc/freeDiameter/smf.conf
 
 ################################################################################
 # SMF Info

Changes in configuration files of eUPF

See here for the original file.

eupf/config.yml
There is no change.

Changes in configuration files of UERANSIM UE / RAN

Changes in configuration files of RAN

UERANSIM/config/open5gs-gnb.yaml

--- open5gs-gnb.yaml.orig       2023-12-02 06:14:20.000000000 +0900
+++ open5gs-gnb.yaml    2024-03-24 20:33:09.114942556 +0900
@@ -1,17 +1,17 @@
-mcc: '999'          # Mobile Country Code value
-mnc: '70'           # Mobile Network Code value (2 or 3 digits)
+mcc: '001'          # Mobile Country Code value
+mnc: '01'           # Mobile Network Code value (2 or 3 digits)
 
 nci: '0x000000010'  # NR Cell Identity (36-bit)
 idLength: 32        # NR gNB ID length in bits [22...32]
 tac: 1              # Tracking Area Code
 
-linkIp: 127.0.0.1   # gNB's local IP address for Radio Link Simulation (Usually same with local IP)
-ngapIp: 127.0.0.1   # gNB's local IP address for N2 Interface (Usually same with local IP)
-gtpIp: 127.0.0.1    # gNB's local IP address for N3 Interface (Usually same with local IP)
+linkIp: 192.168.0.131   # gNB's local IP address for Radio Link Simulation (Usually same with local IP)
+ngapIp: 192.168.0.131   # gNB's local IP address for N2 Interface (Usually same with local IP)
+gtpIp: 192.168.13.131    # gNB's local IP address for N3 Interface (Usually same with local IP)
 
 # List of AMF address information
 amfConfigs:
-  - address: 127.0.0.5
+  - address: 192.168.0.111
     port: 38412
 
 # List of supported S-NSSAIs by this gNB

Changes in configuration files of UE (IMSI-001010000000000)

UERANSIM/config/open5gs-ue.yaml

--- open5gs-ue.yaml.orig        2023-12-02 06:14:20.000000000 +0900
+++ open5gs-ue.yaml     2024-03-24 20:36:02.968447533 +0900
@@ -1,9 +1,9 @@
 # IMSI number of the UE. IMSI = [MCC|MNC|MSISDN] (In total 15 digits)
-supi: 'imsi-999700000000001'
+supi: 'imsi-001010000000000'
 # Mobile Country Code value of HPLMN
-mcc: '999'
+mcc: '001'
 # Mobile Network Code value of HPLMN (2 or 3 digits)
-mnc: '70'
+mnc: '01'
 # SUCI Protection Scheme : 0 for Null-scheme, 1 for Profile A and 2 for Profile B
 protectionScheme: 0
 # Home Network Public Key for protecting with SUCI Profile A
@@ -28,7 +28,7 @@
 
 # List of gNB IP addresses for Radio Link Simulation
 gnbSearchList:
-  - 127.0.0.1
+  - 192.168.0.131
 
 # UAC Access Identities Configuration
 uacAic:

Network settings of Open5GS 5GC, eUPF and UERANSIM UE / RAN

Network settings of eUPF and Data Network Gateway

See this1 and this2.

Build Open5GS, eUPF and UERANSIM

Please refer to the following for building Open5GS, eUPF and UERANSIM respectively.

Open5GS v2.7.0 (2024.03.24) - https://open5gs.org/open5gs/docs/guide/02-building-open5gs-from-sources/
eUPF v0.6.1 (2024.01.25) - https://github.com/s5uishida/install_eupf
UERANSIM v3.2.6 (2024.03.08) - https://github.com/aligungr/UERANSIM/wiki/Installation

Install MongoDB on Open5GS 5GC C-Plane machine. MongoDB Compass is a convenient tool to look at the MongoDB database.

Run Open5GS 5GC, eUPF and UERANSIM UE / RAN

First run eUPF, then the 5GC and UERANSIM (UE & RAN implementation).

Run eUPF

See this.

Run Open5GS 5GC C-Plane

./install/bin/open5gs-nrfd &
sleep 2
./install/bin/open5gs-scpd &
sleep 2
./install/bin/open5gs-amfd &
sleep 2
./install/bin/open5gs-smfd &
./install/bin/open5gs-ausfd &
./install/bin/open5gs-udmd &
./install/bin/open5gs-udrd &
./install/bin/open5gs-pcfd &
./install/bin/open5gs-nssfd &
./install/bin/open5gs-bsfd &

The PFCP association log between eUPF and Open5GS SMF is as follows.

2024/03/24 21:59:51 INF Got Association Setup Request from: 192.168.14.111. 

2024/03/24 21:59:51 INF 
Association Setup Request:
  Node ID: 192.168.14.111
  Recovery Time: 2024-03-24 21:59:51 +0900 JST

2024/03/24 21:59:51 INF Saving new association: &{ID:192.168.14.111 Addr:192.168.14.111 NextSessionID:1 NextSequenceID:1 Sessions:map[] HeartbeatChannel:0xc0000bcc00 FailedHeartbeats:0 HeartbeatsActive:false Mutex:{state:0 sema:0}}

Run UERANSIM

Here, the case of UE (IMSI-001010000000000) & RAN is described. First, do an NG Setup between gNodeB and 5GC, then register the UE with 5GC and establish a PDU session.

Please refer to the following for usage of UERANSIM.

https://github.com/aligungr/UERANSIM/wiki/Usage

Start gNB

Start gNB as follows.

# ./nr-gnb -c ../config/open5gs-gnb.yaml
UERANSIM v3.2.6
[2024-03-24 22:00:24.369] [sctp] [info] Trying to establish SCTP connection... (192.168.0.111:38412)
[2024-03-24 22:00:24.375] [sctp] [info] SCTP connection established (192.168.0.111:38412)
[2024-03-24 22:00:24.375] [sctp] [debug] SCTP association setup ascId[22]
[2024-03-24 22:00:24.375] [ngap] [debug] Sending NG Setup Request
[2024-03-24 22:00:24.387] [ngap] [debug] NG Setup Response received
[2024-03-24 22:00:24.387] [ngap] [info] NG Setup procedure is successful

The Open5GS C-Plane log when executed is as follows.

03/24 22:00:24.457: [amf] INFO: gNB-N2 accepted[192.168.0.131]:52156 in ng-path module (../src/amf/ngap-sctp.c:113)
03/24 22:00:24.457: [amf] INFO: gNB-N2 accepted[192.168.0.131] in master_sm module (../src/amf/amf-sm.c:754)
03/24 22:00:24.468: [amf] INFO: [Added] Number of gNBs is now 1 (../src/amf/context.c:1236)
03/24 22:00:24.468: [amf] INFO: gNB-N2[192.168.0.131] max_num_of_ostreams : 10 (../src/amf/amf-sm.c:793)

Start UE

Start UE as follows. This will register the UE with 5GC and establish a PDU session.

# ./nr-ue -c ../config/open5gs-ue.yaml
UERANSIM v3.2.6
[2024-03-24 22:00:54.159] [nas] [info] UE switches to state [MM-DEREGISTERED/PLMN-SEARCH]
[2024-03-24 22:00:54.160] [rrc] [debug] New signal detected for cell[1], total [1] cells in coverage
[2024-03-24 22:00:54.160] [nas] [info] Selected plmn[001/01]
[2024-03-24 22:00:54.160] [rrc] [info] Selected cell plmn[001/01] tac[1] category[SUITABLE]
[2024-03-24 22:00:54.160] [nas] [info] UE switches to state [MM-DEREGISTERED/PS]
[2024-03-24 22:00:54.160] [nas] [info] UE switches to state [MM-DEREGISTERED/NORMAL-SERVICE]
[2024-03-24 22:00:54.161] [nas] [debug] Initial registration required due to [MM-DEREG-NORMAL-SERVICE]
[2024-03-24 22:00:54.161] [nas] [debug] UAC access attempt is allowed for identity[0], category[MO_sig]
[2024-03-24 22:00:54.162] [nas] [debug] Sending Initial Registration
[2024-03-24 22:00:54.162] [rrc] [debug] Sending RRC Setup Request
[2024-03-24 22:00:54.162] [nas] [info] UE switches to state [MM-REGISTER-INITIATED]
[2024-03-24 22:00:54.162] [rrc] [info] RRC connection established
[2024-03-24 22:00:54.162] [rrc] [info] UE switches to state [RRC-CONNECTED]
[2024-03-24 22:00:54.162] [nas] [info] UE switches to state [CM-CONNECTED]
[2024-03-24 22:00:54.170] [nas] [debug] Authentication Request received
[2024-03-24 22:00:54.170] [nas] [debug] Received SQN [0000000000C1]
[2024-03-24 22:00:54.170] [nas] [debug] SQN-MS [000000000000]
[2024-03-24 22:00:54.174] [nas] [debug] Security Mode Command received
[2024-03-24 22:00:54.174] [nas] [debug] Selected integrity[2] ciphering[0]
[2024-03-24 22:00:54.186] [nas] [debug] Registration accept received
[2024-03-24 22:00:54.186] [nas] [info] UE switches to state [MM-REGISTERED/NORMAL-SERVICE]
[2024-03-24 22:00:54.187] [nas] [debug] Sending Registration Complete
[2024-03-24 22:00:54.187] [nas] [info] Initial Registration is successful
[2024-03-24 22:00:54.187] [nas] [debug] Sending PDU Session Establishment Request
[2024-03-24 22:00:54.187] [nas] [debug] UAC access attempt is allowed for identity[0], category[MO_sig]
[2024-03-24 22:00:54.395] [nas] [debug] Configuration Update Command received
[2024-03-24 22:00:54.418] [nas] [debug] PDU Session Establishment Accept received
[2024-03-24 22:00:54.424] [nas] [info] PDU Session establishment is successful PSI[1]
[2024-03-24 22:00:54.450] [app] [info] Connection setup for PDU session[1] is successful, TUN interface[uesimtun0, 10.45.0.2] is up.

The Open5GS C-Plane log when executed is as follows.

03/24 22:00:54.234: [amf] INFO: InitialUEMessage (../src/amf/ngap-handler.c:401)
03/24 22:00:54.234: [amf] INFO: [Added] Number of gNB-UEs is now 1 (../src/amf/context.c:2656)
03/24 22:00:54.234: [amf] INFO:     RAN_UE_NGAP_ID[1] AMF_UE_NGAP_ID[1] TAC[1] CellID[0x10] (../src/amf/ngap-handler.c:562)
03/24 22:00:54.235: [amf] INFO: [suci-0-001-01-0000-0-0-0000000000] Unknown UE by SUCI (../src/amf/context.c:1840)
03/24 22:00:54.235: [amf] INFO: [Added] Number of AMF-UEs is now 1 (../src/amf/context.c:1621)
03/24 22:00:54.235: [gmm] INFO: Registration request (../src/amf/gmm-sm.c:1224)
03/24 22:00:54.235: [gmm] INFO: [suci-0-001-01-0000-0-0-0000000000]    SUCI (../src/amf/gmm-handler.c:172)
03/24 22:00:54.236: [sbi] WARNING: [UDM] (NRF-discover) NF has already been added [66c9dc3a-e9de-41ee-a234-61d760e39d0c:1] (../lib/sbi/nnrf-handler.c:1162)
03/24 22:00:54.237: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.12:80] (../lib/sbi/context.c:2210)
03/24 22:00:54.237: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.12:7777] (../lib/sbi/context.c:1946)
03/24 22:00:54.237: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.12:7777] (../lib/sbi/context.c:1946)
03/24 22:00:54.237: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.12:7777] (../lib/sbi/context.c:1946)
03/24 22:00:54.237: [sbi] INFO: [UDM] (NF-discover) NF Profile updated [66c9dc3a-e9de-41ee-a234-61d760e39d0c:1] (../lib/sbi/nnrf-handler.c:1200)
03/24 22:00:54.240: [sbi] INFO: [UDM] (SCP-discover) NF registered [66c9dc3a-e9de-41ee-a234-61d760e39d0c:1] (../lib/sbi/path.c:211)
03/24 22:00:54.254: [sbi] WARNING: [UDR] (NRF-discover) NF has already been added [66d0b8fc-e9de-41ee-8e27-71ed0679dc22:1] (../lib/sbi/nnrf-handler.c:1162)
03/24 22:00:54.255: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.20:80] (../lib/sbi/context.c:2210)
03/24 22:00:54.255: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.20:7777] (../lib/sbi/context.c:1946)
03/24 22:00:54.255: [sbi] INFO: [UDR] (NF-discover) NF Profile updated [66d0b8fc-e9de-41ee-8e27-71ed0679dc22:1] (../lib/sbi/nnrf-handler.c:1200)
03/24 22:00:54.256: [sbi] INFO: [UDR] (SCP-discover) NF registered [66d0b8fc-e9de-41ee-8e27-71ed0679dc22:1] (../lib/sbi/path.c:211)
03/24 22:00:54.466: [gmm] INFO: [imsi-001010000000000] Registration complete (../src/amf/gmm-sm.c:2321)
03/24 22:00:54.466: [amf] INFO: [imsi-001010000000000] Configuration update command (../src/amf/nas-path.c:591)
03/24 22:00:54.466: [gmm] INFO:     UTC [2024-03-24T13:00:54] Timezone[0]/DST[0] (../src/amf/gmm-build.c:558)
03/24 22:00:54.467: [gmm] INFO:     LOCAL [2024-03-24T22:00:54] Timezone[32400]/DST[0] (../src/amf/gmm-build.c:563)
03/24 22:00:54.467: [amf] INFO: [Added] Number of AMF-Sessions is now 1 (../src/amf/context.c:2677)
03/24 22:00:54.467: [gmm] INFO: UE SUPI[imsi-001010000000000] DNN[internet] S_NSSAI[SST:1 SD:0xffffff] smContextRef [NULL] (../src/amf/gmm-handler.c:1285)
03/24 22:00:54.467: [gmm] INFO: SMF Instance [66dc64e0-e9de-41ee-bae4-734de2e530bc] (../src/amf/gmm-handler.c:1324)
03/24 22:00:54.468: [smf] INFO: [Added] Number of SMF-UEs is now 1 (../src/smf/context.c:1019)
03/24 22:00:54.469: [smf] INFO: [Added] Number of SMF-Sessions is now 1 (../src/smf/context.c:3090)
03/24 22:00:54.470: [sbi] WARNING: [UDM] (NRF-discover) NF has already been added [66c9dc3a-e9de-41ee-a234-61d760e39d0c:1] (../lib/sbi/nnrf-handler.c:1162)
03/24 22:00:54.470: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.12:80] (../lib/sbi/context.c:2210)
03/24 22:00:54.470: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.12:7777] (../lib/sbi/context.c:1946)
03/24 22:00:54.470: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.12:7777] (../lib/sbi/context.c:1946)
03/24 22:00:54.470: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.12:7777] (../lib/sbi/context.c:1946)
03/24 22:00:54.470: [sbi] INFO: [UDM] (NF-discover) NF Profile updated [66c9dc3a-e9de-41ee-a234-61d760e39d0c:1] (../lib/sbi/nnrf-handler.c:1200)
03/24 22:00:54.473: [sbi] INFO: [UDM] (SCP-discover) NF registered [66c9dc3a-e9de-41ee-a234-61d760e39d0c:1] (../lib/sbi/path.c:211)
03/24 22:00:54.474: [sbi] WARNING: [PCF] (NRF-discover) NF has already been added [66d0e08e-e9de-41ee-8011-9bc9c6bce415:1] (../lib/sbi/nnrf-handler.c:1162)
03/24 22:00:54.474: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.13:80] (../lib/sbi/context.c:2210)
03/24 22:00:54.474: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.13:7777] (../lib/sbi/context.c:1946)
03/24 22:00:54.475: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.13:7777] (../lib/sbi/context.c:1946)
03/24 22:00:54.475: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.13:7777] (../lib/sbi/context.c:1946)
03/24 22:00:54.475: [sbi] INFO: [PCF] (NF-discover) NF Profile updated [66d0e08e-e9de-41ee-8011-9bc9c6bce415:1] (../lib/sbi/nnrf-handler.c:1200)
03/24 22:00:54.476: [sbi] WARNING: [UDR] (NRF-discover) NF has already been added [66d0b8fc-e9de-41ee-8e27-71ed0679dc22:1] (../lib/sbi/nnrf-handler.c:1162)
03/24 22:00:54.476: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.20:80] (../lib/sbi/context.c:2210)
03/24 22:00:54.477: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.20:7777] (../lib/sbi/context.c:1946)
03/24 22:00:54.477: [sbi] INFO: [UDR] (NF-discover) NF Profile updated [66d0b8fc-e9de-41ee-8e27-71ed0679dc22:1] (../lib/sbi/nnrf-handler.c:1200)
03/24 22:00:54.478: [sbi] WARNING: [UDR] (SCP-discover) NF has already been added [66d0b8fc-e9de-41ee-8e27-71ed0679dc22:2] (../lib/sbi/path.c:216)
03/24 22:00:54.479: [sbi] WARNING: [BSF] (NRF-discover) NF has already been added [66c97380-e9de-41ee-a2a8-d3f2bbd80543:1] (../lib/sbi/nnrf-handler.c:1162)
03/24 22:00:54.479: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.15:80] (../lib/sbi/context.c:2210)
03/24 22:00:54.479: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.15:7777] (../lib/sbi/context.c:1946)
03/24 22:00:54.479: [sbi] INFO: [BSF] (NF-discover) NF Profile updated [66c97380-e9de-41ee-a2a8-d3f2bbd80543:1] (../lib/sbi/nnrf-handler.c:1200)
03/24 22:00:54.480: [sbi] INFO: [BSF] (SCP-discover) NF registered [66c97380-e9de-41ee-a2a8-d3f2bbd80543:1] (../lib/sbi/path.c:211)
03/24 22:00:54.481: [sbi] INFO: [PCF] (SCP-discover) NF registered [66d0e08e-e9de-41ee-8011-9bc9c6bce415:1] (../lib/sbi/path.c:211)
03/24 22:00:54.482: [smf] INFO: UE SUPI[imsi-001010000000000] DNN[internet] IPv4[10.45.0.2] IPv6[] (../src/smf/npcf-handler.c:542)
03/24 22:00:54.483: [gtp] INFO: gtp_connect() [192.168.13.151]:2152 (../lib/gtp/path.c:60)
03/24 22:00:54.491: [core] WARNING: Unknown TLV type [60] (../lib/core/ogs-tlv-msg.c:672)
03/24 22:00:54.493: [sbi] WARNING: [UDM] (NRF-discover) NF has already been added [66c9dc3a-e9de-41ee-a234-61d760e39d0c:1] (../lib/sbi/nnrf-handler.c:1162)
03/24 22:00:54.493: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.12:80] (../lib/sbi/context.c:2210)
03/24 22:00:54.494: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.12:7777] (../lib/sbi/context.c:1946)
03/24 22:00:54.494: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.12:7777] (../lib/sbi/context.c:1946)
03/24 22:00:54.495: [sbi] WARNING: NF EndPoint(addr) updated [127.0.0.12:7777] (../lib/sbi/context.c:1946)
03/24 22:00:54.495: [sbi] INFO: [UDM] (NF-discover) NF Profile updated [66c9dc3a-e9de-41ee-a234-61d760e39d0c:1] (../lib/sbi/nnrf-handler.c:1200)
03/24 22:00:54.497: [sbi] WARNING: [UDM] (SCP-discover) NF has already been added [66c9dc3a-e9de-41ee-a234-61d760e39d0c:2] (../lib/sbi/path.c:216)
03/24 22:00:54.498: [amf] INFO: [imsi-001010000000000:1:11][0:0:NULL] /nsmf-pdusession/v1/sm-contexts/{smContextRef}/modify (../src/amf/nsmf-handler.c:867)

The PDU session establishment log of eUPF is as follows.

2024/03/24 22:00:54 INF Got Session Establishment Request from: 192.168.14.111.
2024/03/24 22:00:54 INF 
Session Establishment Request:
  CreatePDR ID: 1 
    FAR ID: 1 
    QER ID: 1 
    URR ID: 1 
    Source Interface: 1 
    UE IPv4 Address: 10.45.0.2 
  CreatePDR ID: 2 
    Outer Header Removal: 0 
    FAR ID: 2 
    QER ID: 1 
    Source Interface: 0 
    TEID: 0 
    Ipv4: <nil> 
    Ipv6: <nil> 
    UE IPv4 Address: 10.45.0.2 
  CreatePDR ID: 3 
    Outer Header Removal: 0 
    FAR ID: 1 
    QER ID: 1 
    Source Interface: 3 
    TEID: 0 
    Ipv4: <nil> 
    Ipv6: <nil> 
  CreatePDR ID: 4 
    Outer Header Removal: 0 
    FAR ID: 3 
    Source Interface: 0 
    TEID: 0 
    Ipv4: <nil> 
    Ipv6: <nil> 
    SDF Filter: permit out 58 from ff02::2/128 to assigned 
  CreateFAR ID: 1 
    Apply Action: [12 0] 
    BAR ID: 1 
  CreateFAR ID: 2 
    Apply Action: [2 0] 
    Forwarding Parameters:
      Network Instance:internet 
  CreateFAR ID: 3 
    Apply Action: [2 0] 
    Forwarding Parameters:
      Network Instance:internet 
      Outer Header Creation: &{OuterHeaderCreationDescription:256 TEID:1 IPv4Address:192.168.14.111 IPv6Address:<nil> PortNumber:0 CTag:0 STag:0} 
  CreateQER ID: 1 
    Gate Status DL: 0 
    Gate Status UL: 0 
    Max Bitrate DL: 1000000 
    Max Bitrate UL: 1000000 
    QFI: 1 
  CreateURR ID: 1 
    Measurement Method: 2 
    Volume Threshold: &{Flags:1 TotalVolume:104857600 UplinkVolume:0 DownlinkVolume:0} 
  CreateBAR ID: 1

2024/03/24 22:00:54 INF Saving FAR info to session: 1, {Action:12 OuterHeaderCreation:0 Teid:0 RemoteIP:0 LocalIP:2534254784 TransportLevelMarking:0}
2024/03/24 22:00:54 INF WARN: No OuterHeaderCreation
2024/03/24 22:00:54 INF Saving FAR info to session: 2, {Action:2 OuterHeaderCreation:0 Teid:0 RemoteIP:0 LocalIP:2534254784 TransportLevelMarking:0}
2024/03/24 22:00:54 INF Saving FAR info to session: 3, {Action:2 OuterHeaderCreation:1 Teid:1 RemoteIP:1863231680 LocalIP:2534254784 TransportLevelMarking:0}
2024/03/24 22:00:54 INF Saving QER info to session: 1, {GateStatusUL:0 GateStatusDL:0 Qfi:1 MaxBitrateUL:1000000000 MaxBitrateDL:1000000000 StartUL:0 StartDL:0}
2024/03/24 22:00:54 Matched groups: [permit out 58 from ff02::2/128 to assigned 58 ff02::2 128  assigned  ]
2024/03/24 22:00:54 INF Session Establishment Request from 192.168.14.111 accepted.
2024/03/24 22:00:54 INF Got Session Modification Request from: 192.168.14.111. 

2024/03/24 22:00:54 INF Finding association for 192.168.14.111
2024/03/24 22:00:54 INF Finding session 2
2024/03/24 22:00:54 INF 
Session Modification Request:
  UpdateFAR ID: 1 
    Apply Action: [2 0] 
    Update forwarding Parameters:
      Network Instance:internet 
      Outer Header Creation: &{OuterHeaderCreationDescription:256 TEID:1 IPv4Address:192.168.13.131 IPv6Address:<nil> PortNumber:0 CTag:0 STag:0} 

2024/03/24 22:00:54 INF Updating FAR info: 1, {FarInfo:{Action:2 OuterHeaderCreation:1 Teid:1 RemoteIP:2198710464 LocalIP:2534254784 TransportLevelMarking:0} GlobalId:0}

Looking at the console log of the nr-ue command, UE has been assigned the IP address 10.45.0.2 from Open5GS 5GC.

[2024-03-24 22:00:54.450] [app] [info] Connection setup for PDU session[1] is successful, TUN interface[uesimtun0, 10.45.0.2] is up.

Just in case, make sure it matches the IP address of the UE's TUNnel interface.

# ip addr show
...
14: uesimtun0: <POINTOPOINT,PROMISC,NOTRAILERS,UP,LOWER_UP> mtu 1400 qdisc fq_codel state UNKNOWN group default qlen 500
    link/none 
    inet 10.45.0.2/32 scope global uesimtun0
       valid_lft forever preferred_lft forever
    inet6 fe80::a810:2eb2:4892:633b/64 scope link stable-privacy 
       valid_lft forever preferred_lft forever
...

Ping google.com

Specify the UE's TUNnel interface and try ping.

Please refer to the following for usage of TUNnel interface.

https://github.com/aligungr/UERANSIM/wiki/Usage

Case for going through DN 10.45.0.0/16

Run tcpdump on VM-DN and check that the packet goes through N6 (enp0s9).

ping google.com on VM3 (UE)

# ping google.com -I uesimtun0 -n
PING google.com (142.250.207.46) from 10.45.0.2 uesimtun0: 56(84) bytes of data.
64 bytes from 142.250.207.46: icmp_seq=1 ttl=61 time=94.2 ms
64 bytes from 142.250.207.46: icmp_seq=2 ttl=61 time=87.4 ms
64 bytes from 142.250.207.46: icmp_seq=3 ttl=61 time=64.8 ms

Run tcpdump on VM-DN

# tcpdump -i enp0s9 -n
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on enp0s9, link-type EN10MB (Ethernet), snapshot length 262144 bytes
22:03:22.576612 IP 10.45.0.2 > 142.250.207.46: ICMP echo request, id 15, seq 1, length 64
22:03:22.668680 IP 142.250.207.46 > 10.45.0.2: ICMP echo reply, id 15, seq 1, length 64
22:03:23.578331 IP 10.45.0.2 > 142.250.207.46: ICMP echo request, id 15, seq 2, length 64
22:03:23.664546 IP 142.250.207.46 > 10.45.0.2: ICMP echo reply, id 15, seq 2, length 64
22:03:24.579259 IP 10.45.0.2 > 142.250.207.46: ICMP echo request, id 15, seq 3, length 64
22:03:24.643079 IP 142.250.207.46 > 10.45.0.2: ICMP echo reply, id 15, seq 3, length 64

See /sys/kernel/debug/tracing/trace_pipe on VM-UP

# cat /sys/kernel/debug/tracing/trace_pipe
...
          <idle>-0       [000] d.s31   890.944767: bpf_trace_printk: upf: gtp-u received
          <idle>-0       [000] d.s31   890.944771: bpf_trace_printk: SDF: filter protocol: 4
          <idle>-0       [000] d.s31   890.944773: bpf_trace_printk: SDF: filter source ip: 0.0.0.2, destination ip: 0.0.0.0
          <idle>-0       [000] d.s31   890.944774: bpf_trace_printk: SDF: filter source ip mask: 255.255.255.255, destination ip mask: 0.0.0.0
          <idle>-0       [000] d.s31   890.944775: bpf_trace_printk: SDF: filter source port lower bound: 0, source port upper bound: 65535
          <idle>-0       [000] d.s31   890.944776: bpf_trace_printk: SDF: filter destination port lower bound: 0, destination port upper bound: 65535
          <idle>-0       [000] d.s31   890.944776: bpf_trace_printk: SDF: packet protocol: 0
          <idle>-0       [000] d.s31   890.944777: bpf_trace_printk: SDF: packet source ip: 10.45.0.2, destination ip: 142.250.207.46
          <idle>-0       [000] d.s31   890.944778: bpf_trace_printk: SDF: packet source port: 0, destination port: 0
          <idle>-0       [000] d.s31   890.944779: bpf_trace_printk: upf: sdf filter doesn't match teid:1
          <idle>-0       [000] d.s31   890.944780: bpf_trace_printk: upf: far:1 action:2 outer_header_creation:0
          <idle>-0       [000] d.s31   890.944781: bpf_trace_printk: upf: qer:0 gate_status:0 mbr:1000000000
          <idle>-0       [000] d.s31   890.944782: bpf_trace_printk: upf: session for teid:1 far:1 outer_header_removal:0
          <idle>-0       [000] d.s31   890.944789: bpf_trace_printk: upf: bpf_fib_lookup 10.45.0.2 -> 142.250.207.46: nexthop: 192.168.16.152
          <idle>-0       [000] d.s31   891.037298: bpf_trace_printk: upf: downlink session for ip:10.45.0.2  far:0 action:2
          <idle>-0       [000] d.s31   891.037303: bpf_trace_printk: upf: qer:0 gate_status:0 mbr:1000000000
          <idle>-0       [000] d.s31   891.037307: bpf_trace_printk: upf: use mapping 10.45.0.2 -> TEID:1
          <idle>-0       [000] d.s31   891.037313: bpf_trace_printk: upf: send gtp pdu 192.168.13.151 -> 192.168.13.131
          <idle>-0       [000] d.s31   891.037334: bpf_trace_printk: upf: bpf_fib_lookup 192.168.13.151 -> 192.168.13.131: nexthop: 192.168.13.131
          <idle>-0       [000] d.s31   891.946416: bpf_trace_printk: upf: gtp-u received
          <idle>-0       [000] d.s31   891.946419: bpf_trace_printk: SDF: filter protocol: 4
          <idle>-0       [000] d.s31   891.946422: bpf_trace_printk: SDF: filter source ip: 0.0.0.2, destination ip: 0.0.0.0
          <idle>-0       [000] d.s31   891.946423: bpf_trace_printk: SDF: filter source ip mask: 255.255.255.255, destination ip mask: 0.0.0.0
          <idle>-0       [000] d.s31   891.946424: bpf_trace_printk: SDF: filter source port lower bound: 0, source port upper bound: 65535
          <idle>-0       [000] d.s31   891.946425: bpf_trace_printk: SDF: filter destination port lower bound: 0, destination port upper bound: 65535
          <idle>-0       [000] d.s31   891.946425: bpf_trace_printk: SDF: packet protocol: 0
          <idle>-0       [000] d.s31   891.946426: bpf_trace_printk: SDF: packet source ip: 10.45.0.2, destination ip: 142.250.207.46
          <idle>-0       [000] d.s31   891.946427: bpf_trace_printk: SDF: packet source port: 0, destination port: 0
          <idle>-0       [000] d.s31   891.946427: bpf_trace_printk: upf: sdf filter doesn't match teid:1
          <idle>-0       [000] d.s31   891.946428: bpf_trace_printk: upf: far:1 action:2 outer_header_creation:0
          <idle>-0       [000] d.s31   891.946429: bpf_trace_printk: upf: qer:0 gate_status:0 mbr:1000000000
          <idle>-0       [000] d.s31   891.946430: bpf_trace_printk: upf: session for teid:1 far:1 outer_header_removal:0
          <idle>-0       [000] d.s31   891.946437: bpf_trace_printk: upf: bpf_fib_lookup 10.45.0.2 -> 142.250.207.46: nexthop: 192.168.16.152
          <idle>-0       [000] d.s31   892.032898: bpf_trace_printk: upf: downlink session for ip:10.45.0.2  far:0 action:2
          <idle>-0       [000] d.s31   892.032900: bpf_trace_printk: upf: qer:0 gate_status:0 mbr:1000000000
          <idle>-0       [000] d.s31   892.032901: bpf_trace_printk: upf: use mapping 10.45.0.2 -> TEID:1
          <idle>-0       [000] d.s31   892.032903: bpf_trace_printk: upf: send gtp pdu 192.168.13.151 -> 192.168.13.131
          <idle>-0       [000] d.s31   892.032909: bpf_trace_printk: upf: bpf_fib_lookup 192.168.13.151 -> 192.168.13.131: nexthop: 192.168.13.131
          <idle>-0       [000] d.s31   892.947303: bpf_trace_printk: upf: gtp-u received
          <idle>-0       [000] d.s31   892.947306: bpf_trace_printk: SDF: filter protocol: 4
          <idle>-0       [000] d.s31   892.947309: bpf_trace_printk: SDF: filter source ip: 0.0.0.2, destination ip: 0.0.0.0
          <idle>-0       [000] d.s31   892.947310: bpf_trace_printk: SDF: filter source ip mask: 255.255.255.255, destination ip mask: 0.0.0.0
          <idle>-0       [000] d.s31   892.947311: bpf_trace_printk: SDF: filter source port lower bound: 0, source port upper bound: 65535
          <idle>-0       [000] d.s31   892.947312: bpf_trace_printk: SDF: filter destination port lower bound: 0, destination port upper bound: 65535
          <idle>-0       [000] d.s31   892.947312: bpf_trace_printk: SDF: packet protocol: 0
          <idle>-0       [000] d.s31   892.947313: bpf_trace_printk: SDF: packet source ip: 10.45.0.2, destination ip: 142.250.207.46
          <idle>-0       [000] d.s31   892.947314: bpf_trace_printk: SDF: packet source port: 0, destination port: 0
          <idle>-0       [000] d.s31   892.947314: bpf_trace_printk: upf: sdf filter doesn't match teid:1
          <idle>-0       [000] d.s31   892.947316: bpf_trace_printk: upf: far:1 action:2 outer_header_creation:0
          <idle>-0       [000] d.s31   892.947316: bpf_trace_printk: upf: qer:0 gate_status:0 mbr:1000000000
          <idle>-0       [000] d.s31   892.947317: bpf_trace_printk: upf: session for teid:1 far:1 outer_header_removal:0
          <idle>-0       [000] d.s31   892.947324: bpf_trace_printk: upf: bpf_fib_lookup 10.45.0.2 -> 142.250.207.46: nexthop: 192.168.16.152
          <idle>-0       [000] d.s31   893.011334: bpf_trace_printk: upf: downlink session for ip:10.45.0.2  far:0 action:2
          <idle>-0       [000] d.s31   893.011336: bpf_trace_printk: upf: qer:0 gate_status:0 mbr:1000000000
          <idle>-0       [000] d.s31   893.011337: bpf_trace_printk: upf: use mapping 10.45.0.2 -> TEID:1
          <idle>-0       [000] d.s31   893.011338: bpf_trace_printk: upf: send gtp pdu 192.168.13.151 -> 192.168.13.131
          <idle>-0       [000] d.s31   893.011344: bpf_trace_printk: upf: bpf_fib_lookup 192.168.13.151 -> 192.168.13.131: nexthop: 192.168.13.131
...

You could specify the IP address assigned to the TUNnel interface to run almost any applications (iperf3 etc.) as in the following example using nr-binder tool.

curl google.com on VM3 (UE)

# sh nr-binder 10.45.0.2 curl google.com
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>301 Moved</TITLE></HEAD><BODY>
<H1>301 Moved</H1>
The document has moved
<A HREF="http://www.google.com/">here</A>.
</BODY></HTML>

Run tcpdump on VM-DN

22:06:40.067210 IP 10.45.0.2.58023 > 142.250.207.46.80: Flags [S], seq 2762348687, win 65280, options [mss 1360,sackOK,TS val 3041328607 ecr 0,nop,wscale 7], length 0
22:06:40.108026 IP 142.250.207.46.80 > 10.45.0.2.58023: Flags [S.], seq 3072001, ack 2762348688, win 65535, options [mss 1460], length 0
22:06:40.111617 IP 10.45.0.2.58023 > 142.250.207.46.80: Flags [.], ack 1, win 65280, length 0
22:06:40.111739 IP 10.45.0.2.58023 > 142.250.207.46.80: Flags [P.], seq 1:75, ack 1, win 65280, length 74: HTTP: GET / HTTP/1.1
22:06:40.111841 IP 142.250.207.46.80 > 10.45.0.2.58023: Flags [.], ack 75, win 65535, length 0
22:06:40.191937 IP 142.250.207.46.80 > 10.45.0.2.58023: Flags [P.], seq 1:774, ack 75, win 65535, length 773: HTTP: HTTP/1.1 301 Moved Permanently
22:06:40.194036 IP 10.45.0.2.58023 > 142.250.207.46.80: Flags [.], ack 774, win 64507, length 0
22:06:40.196749 IP 10.45.0.2.58023 > 142.250.207.46.80: Flags [F.], seq 75, ack 774, win 64507, length 0
22:06:40.196857 IP 142.250.207.46.80 > 10.45.0.2.58023: Flags [.], ack 76, win 65535, length 0
22:06:40.230381 IP 142.250.207.46.80 > 10.45.0.2.58023: Flags [F.], seq 774, ack 76, win 65535, length 0
22:06:40.231142 IP 10.45.0.2.58023 > 142.250.207.46.80: Flags [.], ack 775, win 64507, length 0

Please note that the ping tool does not work with nr-binder. Please refer to here for the reason. You could now connect to the DN and send any packets on the network using eUPF.

Now you could work Open5GS 5GC with eUPF. I would like to thank the excellent developers and all the contributors of Open5GS, eUPF and UERANSIM.

Changelog (summary)

[2024.03.31] This commit fixed the issue where SMF crashes without gtpc section in smf.yaml. So deleted the gtpc section in smf.yaml for 5G use.
[2024.03.24] Updated to eUPF v0.6.1.
[2023.12.05] The eUPF version confirmed to work in the changelog on 2023.12.04 has been tagged as v0.6.0.
[2023.12.05] Updated to Open5GS v2.7.0.
[2023.12.04] Updated as eUPF FTUP feature has been merged into main branch.
[2023.11.24] Updated to eUPF 120-upf-ftup-fteid branch that supports FTUP.
[2023.10.29] Initial release.

Name		Name	Last commit message	Last commit date
Latest commit History 17 Commits
images		images
README.md		README.md

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Open5GS 5GC & UERANSIM UE / RAN Sample Configuration - eUPF(eBPF/XDP UPF)

Sample Configurations and Miscellaneous for Mobile Network

Table of Contents

Overview of Open5GS 5GC Simulation Mobile Network

Changes in configuration files of Open5GS 5GC, eUPF and UERANSIM UE / RAN

Changes in configuration files of Open5GS 5GC C-Plane

Changes in configuration files of eUPF

Changes in configuration files of UERANSIM UE / RAN

Changes in configuration files of RAN

Changes in configuration files of UE (IMSI-001010000000000)

Network settings of Open5GS 5GC, eUPF and UERANSIM UE / RAN

Network settings of eUPF and Data Network Gateway

Build Open5GS, eUPF and UERANSIM

Run Open5GS 5GC, eUPF and UERANSIM UE / RAN

Run eUPF

Run Open5GS 5GC C-Plane

Run UERANSIM

Start gNB

Start UE

Ping google.com

Case for going through DN 10.45.0.0/16

Changelog (summary)

About

Releases

Packages

s5uishida/open5gs_5gc_ueransim_eupf_sample_config

Folders and files

Latest commit

History

Repository files navigation

Open5GS 5GC & UERANSIM UE / RAN Sample Configuration - eUPF(eBPF/XDP UPF)

Sample Configurations and Miscellaneous for Mobile Network

Table of Contents

Overview of Open5GS 5GC Simulation Mobile Network

Changes in configuration files of Open5GS 5GC, eUPF and UERANSIM UE / RAN

Changes in configuration files of Open5GS 5GC C-Plane

Changes in configuration files of eUPF

Changes in configuration files of UERANSIM UE / RAN

Changes in configuration files of RAN

Changes in configuration files of UE (IMSI-001010000000000)

Network settings of Open5GS 5GC, eUPF and UERANSIM UE / RAN

Network settings of eUPF and Data Network Gateway

Build Open5GS, eUPF and UERANSIM

Run Open5GS 5GC, eUPF and UERANSIM UE / RAN

Run eUPF

Run Open5GS 5GC C-Plane

Run UERANSIM

Start gNB

Start UE

Ping google.com

Case for going through DN 10.45.0.0/16

Changelog (summary)

About

Topics

Resources

Stars

Watchers

Forks

Releases

Packages 0

Packages