ESP8266 Humidity Sensor (DH11)

Simple program to post humidity sensor data to a specified endpoint

Supports both http and https

Prerequisites

• Arduino CLI
• CP210x USB to UART Bridge VCP Driver
• openssl
• dotnet core sdk (3.1)

Getting Started

Run the example http server

cd ExampleHumidityServer
dotnet build .
dotnet run -p ExampleHumidityServer.csproj

Download dependencies

In another terminal session, run the following script to list out your connected boards and update the ardunio-cli repository with the esp8266 index

./bootstrap.sh

Example output

These are the boards connected
Port                            Type              Board Name FQBN Core
/dev/cu.usbserial-14310         Serial Port (USB) Unknown

Updating arduino index
Updating index: package_index.json downloaded
Updating index: package_esp8266com_index.json downloaded
Downloading esp8266 dependencies
esp8266:esp8266@2.7.1 already downloaded
esp8266:xtensa-lx106-elf-gcc@2.5.0-4-b40a506 already downloaded
esp8266:mkspiffs@2.5.0-4-b40a506 already downloaded
esp8266:mklittlefs@2.5.0-4-fe5bb56 already downloaded
esp8266:python3@3.7.2-post1 already downloaded

Take note of the port that you want to use, in this case, /dev/cu.usbserial-14310

Build & Run the code

Run the following script to compile and run the code

./run.sh "/dev/cu.usbserial-14310" "https://your-server-ip/humidity" "SSID" "password"

Example output

Compiling code
Executable segment sizes:
IROM   : 228492          - code in flash         (default or ICACHE_FLASH_ATTR)
IRAM   : 26784   / 32768 - code in IRAM          (ICACHE_RAM_ATTR, ISRs...)
DATA   : 1248  )         - initialized variables (global, static) in RAM/HEAP
RODATA : 688   ) / 81920 - constants             (global, static) in RAM/HEAP
BSS    : 24880 )         - zeroed variables      (global, static) in RAM/HEAP
Sketch uses 257212 bytes (24%) of program storage space. Maximum is 1044464 bytes.
Global variables use 26816 bytes (32%) of dynamic memory, leaving 55104 bytes for local variables. Maximum is 81920 bytes.
Deploying code to esp8266:esp8266:nodemcuv2:xtal=80  on /dev/cu.usbserial-143120
No new serial port detected.
esptool.py v2.8
Serial port /dev/cu.usbserial-143120
Connecting....
Chip is ESP8266EX
Features: WiFi
Crystal is 26MHz
MAC: 50:02:91:7a:1d:f2
Uploading stub...
Running stub...
Stub running...
Configuring flash size...
Auto-detected Flash size: 4MB
Compressed 261360 bytes to 192957...
Wrote 261360 bytes (192957 compressed) at 0x00000000 in 18.7 seconds (effective 111.8 kbit/s)...
Hash of data verified.

Leaving...
Hard resetting via RTS pin...

Run the following command to read the serial output

cat < "/dev/cu.usbserial-14320"

At this point, you should see data hitting the example server

Server:

info: ExampleHumidityServer.Controllers.HumidityController[0]
      Received 58%
info: ExampleHumidityServer.Controllers.HumidityController[0]
      Received 58%
info: ExampleHumidityServer.Controllers.HumidityController[0]
      Received 59%

Esp8266:

{"HumidityPercentage": 58.00 }
HTTP Response code: 202
{"HumidityPercentage": 59.00 }
HTTP Response code: 202
{"HumidityPercentage": 59.00 }
HTTP Response code: 202