Add attestation simulator, blobs info and some updates to Lighthouse …

…Book (#5364)

* Apply suggestions from code review

* Revise attestation simulator doc

* Revise blobs.md

* Summary

* Add blobs

* Simulator docs

* Revise attestation simulator

* minor formatting

* Revise vm node

* Update faq

* Update faq

* Add link to v4.6.0

* Remove minification in the docs

* Update Goerli to Holesky

* Add a note on moved vm validator monitor

* Update Rpi 4 note

* Revise attestation simulator doc

* Add docs for attestation simulator

* update database table

* Update faq on resources used

* Fix and update table

book/src/SUMMARY.md

@@ -53,6 +53,7 @@
     * [MEV](./builders.md)
     * [Merge Migration](./merge-migration.md)
     * [Late Block Re-orgs](./late-block-re-orgs.md)
+    * [Blobs](./advanced-blobs.md)
 * [Built-In Documentation](./help_general.md)
     * [Beacon Node](./help_bn.md)
     * [Validator Client](./help_vc.md)

book/src/advanced-blobs.md

@@ -0,0 +1,42 @@
+# Blobs
+
+In the Deneb network upgrade, one of the changes is the implementation of EIP-4844, also known as [Proto-danksharding](https://blog.ethereum.org/2024/02/27/dencun-mainnet-announcement). Alongside with this, a new term named `blob` (binary large object) is introduced. Blobs are "side-cars" carrying transaction data in a block. They are mainly used by Ethereum layer 2 operators. As far as stakers are concerned, the main difference with the introduction of blobs is the increased storage requirement. 
+
+### FAQ
+
+1. What is the storage requirement for blobs?
+
+   We expect an additional increase of ~50 GB of storage requirement for blobs (on top of what is required by the consensus and execution clients database). The calculation is as below:
+
+   One blob is 128 KB in size. Each block can carry a maximum of 6 blobs. Blobs will be kept for 4096 epochs and pruned afterwards. This means that the maximum increase in storage requirement will be:
+
+   ```
+   2**17 bytes / blob * 6 blobs / block * 32 blocks / epoch * 4096 epochs = 96 GB
+   ```
+
+   However, the blob base fee targets 3 blobs per block and it works similarly to how EIP-1559 operates in the Ethereum gas fee. Therefore, practically it is very likely to average to 3 blobs per blocks, which translates to a storage requirement of 48 GB.
+
+
+1. Do I have to add any flags for blobs?
+
+   No, you can use the default values for blob-related flags, which means you do not need add or remove any flags. 
+
+1. What if I want to keep all blobs?
+
+   Use the flag `--prune-blobs false` in the beacon node. The storage requirement will be:
+
+   ```
+   2**17 bytes * 3 blobs / block * 7200 blocks / day * 30 days = 79GB / month or 948GB / year
+   ```
+
+   To keep blobs for a custom period, you may use the flag `--blob-prune-margin-epochs <EPOCHS>` which keeps blobs for 4096+EPOCHS specified in the flag.
+
+1. How to see the info of the blobs database?
+
+   We can call the API: 
+
+   ```bash
+   curl "http://localhost:5052/lighthouse/database/info" | jq
+   ```
+
+   Refer to [Lighthouse API](./api-lighthouse.md#lighthousedatabaseinfo) for an example response. 

book/src/advanced-release-candidates.md

@@ -40,5 +40,5 @@ There can also be a scenario that a bug has been found and requires an urgent fi
 
 ## When *not* to use a release candidate
 
-Other than the above scenarios, it is generally not recommended to use release candidates for any critical tasks on mainnet (e.g., staking). To test new release candidate features, try one of the testnets (e.g., Goerli).
+Other than the above scenarios, it is generally not recommended to use release candidates for any critical tasks on mainnet (e.g., staking). To test new release candidate features, try one of the testnets (e.g., Holesky).
 

book/src/advanced.md

@@ -21,3 +21,4 @@ tips about how things work under the hood.
 * [Maximal Extractable Value](./builders.md): use external builders for a potential higher rewards during block proposals
 * [Merge Migration](./merge-migration.md): look at what you need to do during a significant network upgrade: The Merge
 * [Late Block Re-orgs](./late-block-re-orgs.md): read information about Lighthouse late block re-orgs.
+* [Blobs](./advanced-blobs.md): information about blobs in Deneb upgrade

book/src/advanced_database.md

@@ -44,7 +44,7 @@ The values shown in the table are approximate, calculated using a simple heurist
 The **Load Historical State** time is the worst-case load time for a state in the last slot
 before a restore point. 
 
-To run a full archival node with fast access to beacon states and a SPRP of 32, the disk usage will be more than 10 TB per year, which is impractical for many users. As such, users may consider running the [tree-states](https://github.com/sigp/lighthouse/releases/tag/v4.5.444-exp) release, which only uses less than 150 GB for a full archival node. The caveat is that it is currently experimental and in alpha release (as of Dec 2023), thus not recommended for running mainnet validators. Nevertheless, it is suitable to be used for analysis purposes, and if you encounter any issues in tree-states, we do appreciate any feedback. We plan to have a stable release of tree-states in 1H 2024.  
+To run a full archival node with fast access to beacon states and a SPRP of 32, the disk usage will be more than 10 TB per year, which is impractical for many users. As such, users may consider running the [tree-states](https://github.com/sigp/lighthouse/releases/tag/v5.0.111-exp) release, which only uses less than 200 GB for a full archival node. The caveat is that it is currently experimental and in alpha release (as of Dec 2023), thus not recommended for running mainnet validators. Nevertheless, it is suitable to be used for analysis purposes, and if you encounter any issues in tree-states, we do appreciate any feedback. We plan to have a stable release of tree-states in 1H 2024.  
 
 ### Defaults
 

book/src/checkpoint-sync.md

@@ -1,6 +1,6 @@
 # Checkpoint Sync
 
-Lighthouse supports syncing from a recent finalized checkpoint. This is substantially faster than syncing from genesis, while still providing all the same features. Checkpoint sync is also safer as it protects the node from long-range attacks. Since 4.6.0, checkpoint sync is required by default and genesis sync will no longer work without the use of `--allow-insecure-genesis-sync`.
+Lighthouse supports syncing from a recent finalized checkpoint. This is substantially faster than syncing from genesis, while still providing all the same features. Checkpoint sync is also safer as it protects the node from long-range attacks. Since [v4.6.0](https://github.com/sigp/lighthouse/releases/tag/v4.6.0), checkpoint sync is required by default and genesis sync will no longer work without the use of `--allow-insecure-genesis-sync`.
 
 To quickly get started with checkpoint sync, read the sections below on:
 

book/src/database-migrations.md

@@ -16,7 +16,8 @@ validator client or the slasher**.
 
 | Lighthouse version | Release date | Schema version | Downgrade available? |
 |--------------------|--------------|----------------|----------------------|
-
+| v5.1.0             | Mar 2024     | v19            | yes before Deneb     |
+| v5.0.0             | Feb 2024     | v19            | yes before Deneb     |
 | v4.6.0             | Dec 2023     | v19            | yes before Deneb     |
 | v4.6.0-rc.0        | Dec 2023     | v18            | yes before Deneb     |
 | v4.5.0             | Sep 2023     | v17            | yes                  |
@@ -127,7 +128,7 @@ Several conditions need to be met in order to run `lighthouse db`:
 2. The command must run as the user that owns the beacon node database. If you are using systemd then
    your beacon node might run as a user called `lighthousebeacon`.
 3. The `--datadir` flag must be set to the location of the Lighthouse data directory.
-4. The `--network` flag must be set to the correct network, e.g. `mainnet`, `goerli` or `sepolia`.
+4. The `--network` flag must be set to the correct network, e.g. `mainnet`, `holesky` or `sepolia`.
 
 The general form for a `lighthouse db` command is:
 

book/src/docker.md

@@ -115,7 +115,7 @@ You can run a Docker beacon node with the following command:
 docker run -p 9000:9000/tcp -p 9000:9000/udp -p 9001:9001/udp -p 127.0.0.1:5052:5052 -v $HOME/.lighthouse:/root/.lighthouse sigp/lighthouse lighthouse --network mainnet beacon --http --http-address 0.0.0.0
 ```
 
-> To join the Goerli testnet, use `--network goerli` instead.
+> To join the Holesky testnet, use `--network holesky` instead.
 
 > The `-v` (Volumes) and `-p` (Ports) and values are described below.
 

book/src/faq.md

@@ -3,6 +3,7 @@
 ## [Beacon Node](#beacon-node-1)
 - [I see a warning about "Syncing deposit contract block cache" or an error about "updating deposit contract cache", what should I do?](#bn-deposit-contract)
 - [I see beacon logs showing `WARN: Execution engine called failed`, what should I do?](#bn-ee)
+- [I see beacon logs showing `Error during execution engine upcheck`, what should I do?](#bn-upcheck)
 - [My beacon node is stuck at downloading historical block using checkpoint sync. What should I do?](#bn-download-historical)
 - [I proposed a block but the beacon node shows `could not publish message` with error `duplicate` as below, should I be worried?](#bn-duplicate)
 - [I see beacon node logs `Head is optimistic` and I am missing attestations. What should I do?](#bn-optimistic)
@@ -12,6 +13,7 @@
 - [My beacon node logs `WARN Error processing HTTP API request`, what should I do?](#bn-http)
 - [My beacon node logs `WARN Error signalling fork choice waiter`, what should I do?](#bn-fork-choice)
 - [My beacon node logs `ERRO Aggregate attestation queue full`, what should I do?](#bn-queue-full)
+- [My beacon node logs `WARN Failed to finalize deposit cache`, what should I do?](#bn-deposit-cache)
 
 ## [Validator](#validator-1)
 - [Why does it take so long for a validator to be activated?](#vc-activation)
@@ -46,8 +48,6 @@
 
 ## Beacon Node
 
-
-
 ### <a name="bn-deposit-contract"></a> I see a warning about "Syncing deposit contract block cache" or an error about "updating deposit contract cache", what should I do?
 
 The error can be a warning:
@@ -77,7 +77,7 @@ If this log continues appearing during operation, it means your execution client
 
 The `WARN Execution engine called failed` log is shown when the beacon node cannot reach the execution engine. When this warning occurs, it will be followed by a detailed message. A frequently encountered example of the error message is:
 
-`error: Reqwest(reqwest::Error { kind: Request, url: Url { scheme: "http", cannot_be_a_base: false, username: "", password: None, host: Some(Ipv4(127.0.0.1)), port: Some(8551), path: "/", query: None, fragment: None }, source: TimedOut }), service: exec`
+`error: HttpClient(url: http://127.0.0.1:8551/, kind: timeout, detail: operation timed out), service: exec`
 
 which says `TimedOut` at the end of the message. This means that the execution engine has not responded in time to the beacon node. One option is to add the flags `--execution-timeout-multiplier 3` and `--disable-lock-timeouts` to the beacon node. However, if the error persists, it is worth digging further to find out the cause. There are a few reasons why this can occur:
 1. The execution engine is not synced. Check the log of the execution engine to make sure that it is synced. If it is syncing, wait until it is synced and the error will disappear. You will see the beacon node logs `INFO Execution engine online` when it is synced.
@@ -87,7 +87,17 @@ which says `TimedOut` at the end of the message. This means that the execution e
 If the reason for the error message is caused by no. 1 above, you may want to look further. If the execution engine is out of sync suddenly, it is usually caused by ungraceful shutdown. The common causes for ungraceful shutdown are:
 - Power outage. If power outages are an issue at your place, consider getting a UPS to avoid ungraceful shutdown of services.
 - The service file is not stopped properly. To overcome this, make sure that the process is stopped properly, e.g., during client updates.
-- Out of memory (oom) error. This can happen when the system memory usage has reached its maximum and causes the execution engine to be killed. When this occurs, the log file will show `Main process exited, code=killed, status=9/KILL`.  You can also run `sudo journalctl -a --since "18 hours ago" | grep -i "killed process` to confirm that the execution client has been killed due to oom. If you are using geth as the execution client, a short term solution is to reduce the resources used. For example, you can reduce the cache by adding the flag `--cache 2048`. If the oom occurs rather frequently, a long term solution is to increase the memory capacity of the computer.
+- Out of memory (oom) error. This can happen when the system memory usage has reached its maximum and causes the execution engine to be killed. To confirm that the error is due to oom, run `sudo dmesg -T | grep killed` to look for killed processes. If you are using geth as the execution client, a short term solution is to reduce the resources used. For example, you can reduce the cache by adding the flag `--cache 2048`. If the oom occurs rather frequently, a long term solution is to increase the memory capacity of the computer.
+
+### <a name="bn-upcheck"></a> I see beacon logs showing `Error during execution engine upcheck`, what should I do?
+
+An example of the full error is:
+
+`ERRO Error during execution engine upcheck   error: HttpClient(url: http://127.0.0.1:8551/, kind: request, detail: error trying to connect: tcp connect error: Connection refused (os error 111)), service: exec`
+
+Connection refused means the beacon node cannot reach the execution client. This could be due to the execution client is offline or the configuration is wrong. If the execution client is offline, run the execution engine and the error will disappear. 
+
+If it is a configuration issue, ensure that the execution engine can be reached. The standard endpoint to connect to the execution client is `--execution-endpoint http://localhost:8551`. If the execution client is on a different host, the endpoint to connect to it will change, e.g., `--execution-endpoint http://IP_address:8551` where `IP_address` is the IP of the execution client node (you may also need additional flags to be set). If it is using another port, the endpoint link needs to be changed accordingly. Once the execution client/beacon node is configured correctly, the error will disappear.
 
 ### <a name="bn-download-historical"></a> My beacon node is stuck at downloading historical block using checkpoint sync. What should I do?
 
@@ -195,6 +205,9 @@ ERRO Aggregate attestation queue full, queue_len: 4096, msg: the system has insu
 
 This suggests that the computer resources are being overwhelmed. It could be due to high CPU usage or high disk I/O usage. This can happen, e.g., when the beacon node is downloading historical blocks, or when the execution client is syncing. The error will disappear when the resources used return to normal or when the node is synced.
 
+### <a name="bn-deposit-cache"></a> My beacon node logs `WARN Failed to finalize deposit cache`, what should I do?
+
+This is a known [bug](https://github.com/sigp/lighthouse/issues/3707) that will fix by itself. 
 
 ## Validator
 
@@ -268,19 +281,19 @@ repeats until the queue is cleared. The churn limit is summarised in the table b
 
 <div align="center" style="text-align: center;">
 
-| Number of active validators           | Validators activated per epoch     | Validators activated per day |
-|-------------------|--------------------------------------------|----|
-| 327679 or less     | 4    | 900  |
-| 327680-393215            |  5   | 1125 |
-| 393216-458751 | 6 | 1350
-| 458752-524287 | 7  | 1575
-| 524288-589823 | 8| 1800 |
-| 589824-655359 | 9| 2025 |
-| 655360-720895 | 10 | 2250|
-| 720896-786431 | 11 | 2475 |
-| 786432-851967 | 12 | 2700 |
-| 851968-917503 | 13 | 2925 |
-| 917504-983039 | 14 | 3150 |
+| Number of active validators | Validators activated per epoch | Validators activated per day |
+|----------------|----|------|
+| 327679 or less | 4  | 900  |
+| 327680-393215  | 5  | 1125 |
+| 393216-458751  | 6  | 1350 |
+| 458752-524287  | 7  | 1575 |
+| 524288-589823  | 8  | 1800 |
+| 589824-655359  | 9  | 2025 |
+| 655360-720895  | 10 | 2250 |
+| 720896-786431  | 11 | 2475 |
+| 786432-851967  | 12 | 2700 |
+| 851968-917503  | 13 | 2925 |
+| 917504-983039  | 14 | 3150 |
 | 983040-1048575 | 15 | 3375 |
 
 </div>
@@ -335,7 +348,7 @@ If you would like to still use Lighthouse to submit the message, you will need t
 
 ### <a name="vc-resource"></a> Does increasing the number of validators increase the CPU and other computer resources used?
 
-A computer with hardware specifications stated in the [Recommended System Requirements](./installation.md#recommended-system-requirements) can run hundreds validators with only marginal increase in cpu usage. When validators are active, there is a bit of an increase in resources used from validators 0-64, because you end up subscribed to more subnets. After that, the increase in resources plateaus when the number of validators go from 64 to ~500.
+A computer with hardware specifications stated in the [Recommended System Requirements](./installation.md#recommended-system-requirements) can run hundreds validators with only marginal increase in CPU usage. 
 
 ### <a name="vc-reimport"></a> I want to add new validators. Do I have to reimport the existing keys?
 
@@ -363,7 +376,7 @@ network configuration settings. Ensure that the network you wish to connect to
 is correct (the beacon node outputs the network it is connecting to in the
 initial boot-up log lines). On top of this, ensure that you are not using the
 same `datadir` as a previous network, i.e., if you have been running the
-`Goerli` testnet and are now trying to join a new network but using the same
+`Holesky` testnet and are now trying to join a new network but using the same
 `datadir` (the `datadir` is also printed out in the beacon node's logs on
 boot-up).
 
@@ -551,7 +564,7 @@ which says that the version is v4.1.0.
 
 ### <a name="misc-prune"></a> Does Lighthouse have pruning function like the execution client to save disk space?
 
-There is no pruning of Lighthouse database for now. However, since v4.2.0, a feature to only sync back to the weak subjectivity point (approximately 5 months) when syncing via a checkpoint sync was added. This will help to save disk space since the previous behaviour will sync back to the genesis by default.
+Yes, Lighthouse supports [state pruning](./database-migrations.md#how-to-prune-historic-states) which can help to save disk space. 
 
 ### <a name="misc-freezer"></a> Can I use a HDD for the freezer database and only have the hot db on SSD?
 
@@ -565,8 +578,6 @@ The reason why Lighthouse logs in UTC is due to the dependency on an upstream li
 
 A quick way to get the validator back online is by removing the Lighthouse beacon node database and resync Lighthouse using checkpoint sync. A guide to do this can be found in the [Lighthouse Discord server](https://discord.com/channels/605577013327167508/605577013331361793/1019755522985050142). With some free space left, you will then be able to prune the execution client database to free up more space.
 
-For a relatively long term solution, if you are using Geth and Nethermind as the execution client, you can consider setup the online pruning feature. Refer to [Geth](https://blog.ethereum.org/2023/09/12/geth-v1-13-0) and [Nethermind](https://gist.github.com/yorickdowne/67be09b3ba0a9ff85ed6f83315b5f7e0) for details. 
-
 
 
 

book/src/installation.md

@@ -10,7 +10,7 @@ There are three core methods to obtain the Lighthouse application:
 
 Additionally, there are two extra guides for specific uses:
 
-- [Raspberry Pi 4 guide](./pi.md).
+- [Raspberry Pi 4 guide](./pi.md). (Archived)
 - [Cross-compiling guide for developers](./cross-compiling.md).
 
 There are also community-maintained installation methods: