Disclaimer

This project is in no way related to or created by the official Fedora team or its members. It is solely a project of mine.

FedoraWSL2

Fedora rawhide on WSL2 (Windows 10 FCU or later) based on wsldl.

Features and important information

FedoraWSL2 has the following features during the installation stage.

• Increase virtual disk size from the default 256GB
• Create a new user and set the user as default
• FedoraWSL2 Supports systemd natively if you are running wsl v0.67.6 (more details here) and above. For earlier versions of wsl, systemd is supported using diddledani's one-script-wsl2-systemd. This is done automatically during initial setup.
• FedoraWSL2 includes a wsl.conf file which only has section headers. Users can use this to configure the distro to their liking. You can read more about wsl.conf and its configuration settings here.

Requirements

• For x64 systems: Version 1903 or higher, with Build 18362 or higher.
• For ARM64 systems: Version 2004 or higher, with Build 19041 or higher.
• Builds lower than 18362 do not support WSL 2.
• If you are running Windows 10 version 2004 or higher, you can install all components required to run wsl2 with a single command. This will install ubuntu by default. More details are available here.

   wsl.exe --install

• If you are running Windows 10 lower then version 2004, follow the steps below to install requirements manually. For more details, check this microsoft document.
  • Enable Windows Subsystem for Linux feature.

   dism.exe /online /enable-feature /featurename:Microsoft-Windows-Subsystem-Linux /all /norestart

  • Enable Virtual Machine feature

   dism.exe /online /enable-feature /featurename:VirtualMachinePlatform /all /norestart

  • Download and install the latest Linux kernel update package from here.

Install

• Make sure all the steps mentioned under "Requirements" are completed.
• Download installer zip
• Extract all files in zip file to same directory
• Set version 2 as default. Note that this step is required only for manual installation.

  wsl --set-default-version 2
  

• Run Fedora.exe to extract rootfs and register to WSL

Note: Exe filename is using the instance name to register. If you rename it you can register with a diffrent name and have multiple installs.

How-to-Use(for Installed Instance)

exe Usage

Usage :
    <no args>
      - Open a new shell with your default settings.

    run <command line>
      - Run the given command line in that instance. Inherit current directory.

    runp <command line (includes windows path)>
      - Run the given command line in that instance after converting its path.

    config [setting [value]]
      - `--default-user <user>`: Set the default user of this instance to <user>.
      - `--default-uid <uid>`: Set the default user uid of this instance to <uid>.
      - `--append-path <true|false>`: Switch of Append Windows PATH to $PATH
      - `--mount-drive <true|false>`: Switch of Mount drives
      - `--default-term <default|wt|flute>`: Set default type of terminal window.

    get [setting]
      - `--default-uid`: Get the default user uid in this instance.
      - `--append-path`: Get true/false status of Append Windows PATH to $PATH.
      - `--mount-drive`: Get true/false status of Mount drives.
      - `--wsl-version`: Get the version os the WSL (1/2) of this instance.
      - `--default-term`: Get Default Terminal type of this instance launcher.
      - `--lxguid`: Get WSL GUID key for this instance.

    backup [contents]
      - `--tar`: Output backup.tar to the current directory.
      - `--reg`: Output settings registry file to the current directory.
	  - `--tgz`: Output backup.tar.gz to the current directory.
      - `--vhdx`: Output backup.ext4.vhdx to the current directory.
      - `--vhdxgz`: Output backup.ext4.vhdx.gz to the current directory.

    clean
      - Uninstall that instance.

    help
      - Print this usage message.

Just Run exe

>{InstanceName}.exe
[root@PC-NAME user]#

Run with command line

>{InstanceName}.exe run uname -r
4.4.0-43-Microsoft

Run with command line with path translation

>{InstanceName}.exe runp echo C:\Windows\System32\cmd.exe
/mnt/c/Windows/System32/cmd.exe

Change Default User(id command required)

>{InstanceName}.exe config --default-user user

>{InstanceName}.exe
[user@PC-NAME dir]$

Set "Windows Terminal" as default terminal

>{InstanceName}.exe config --default-term wt

How to setup

FedoraWSL2 will ask you to create a new user during its first run. If you chose to create a new user during initial setup, the steps below are not required unless you want to create additional users.

passwd
useradd -m -g users -G wheel -s /bin/bash <username>
echo "%sudo ALL=(ALL) ALL" >/etc/sudoers.d/wheel
passwd <username>
exit

You can set the user you created as default user using 2 methods.

Open Fedora.exe, run the following command (replace username with the actual username you created).

sed -i '/\[user\]/a default = username' /etc/wsl.conf

Shutdown and restart the distro (this step is important).

(or)

Execute the command below in a windows cmd terminal from the directory where Fedora.exe is installed.

>Fedora.exe config --default-user <username>

How to uninstall instance

>Fedora.exe clean

How to backup instance

export to backup.tar.gz

>Fedora.exe backup --tgz

export to backup.ext4.vhdx.gz

>Fedora.exe backup --vhdxgz

How to restore instance

There are 2 ways to do it.

Rename the backup to rootfs.tar.gz and run Fedora.exe

(or)

.tar(.gz)

>Fedora.exe install backup.tar.gz

.ext4.vhdx(.gz)

>Fedora.exe install backup.ext4.vhdx.gz

You may need to run the command below in some circumstances.

>Fedora.exe --default-uid 1000

How to build

Prerequisites

Docker, tar, zip, unzip, bsdtar need to be installed.

git clone git@gitlab.com:sileshn/FedoraWSL2.git
cd FedoraWSL2
make

Copy the FedoraRawhide.zip file to a safe location and run the command below to clean.

make clean