Pull Requests Since v2.50.0
Unlabeled
- #1195 - adding Pgp4RxLiteLowSpeed.vhd
- #1204 - introduce rst_polarity feature to all pgp4txlite/pgp4rx modules to prepare for asic deployment
- #1194 - adding userCLk to SelectioDeserUltraScale.vhd
- #1203 - _Qsfp.py Update
- #1199 - Updates to AxiLiteSaciMaster.vhd & SaciMaster2.vhd
- #1197 - Increased range of SACI_NUM_CHIPS_G to support more than 4 chips
- #1200 - Pgp4RxLiteLowSpeedLane.vhd Update
- #1198 - Update RstSync.vhd
Pull Request Details
adding userCLk to SelectioDeserUltraScale.vhd
Author: | Larry Ruckman ruckman@slac.stanford.edu |
Date: | Mon Sep 23 10:27:09 2024 -0700 |
Pull: | #1194 (27 additions, 8 deletions, 1 files changed) |
Branch: | slaclab/ruckman/SelectioDeserUltraScale |
Notes:
Description
- mapping
CLKOUT1
touserClk
, which is a useful optional clock reference
adding Pgp4RxLiteLowSpeed.vhd
Author: | Larry Ruckman ruckman@slac.stanford.edu |
Date: | Thu Sep 26 09:52:31 2024 -0700 |
Pull: | #1195 (803 additions, 0 deletions, 5 files changed) |
Branch: | slaclab/Pgp4RxLiteLowSpeed |
Notes:
Description
- Designed for receiving unidirectional PGP4-lite from ASIC using the FPGA's SelectIO (LVDS I/O)
Increased range of SACI_NUM_CHIPS_G to support more than 4 chips
Author: | Larry Ruckman ruckman@slac.stanford.edu |
Date: | Tue Oct 1 08:05:37 2024 -0700 |
Pull: | #1197 (7 additions, 7 deletions, 1 files changed) |
Branch: | slaclab/saci_6_chip |
Notes:
Description
The
AxiLiteSaciMaster
currently has a fixed limit of four ASICs ("chips"). This has been increased to six to work with a new readout system with that many ASICs.Details
The new 3x2 Readout (https://confluence.slac.stanford.edu/x/eKRxG) seems to be first system to use more than four ASICs with a common SACI interfaces. There is no mention why only four chips were allowed previously. The hardware will arrive in a couple of weeks with which we can test running SACI with six chips, but from the code alone I don't see any reason why more than four would not work.
Update RstSync.vhd
Author: | Larry Ruckman ruckman@slac.stanford.edu |
Date: | Wed Sep 25 09:59:04 2024 -0700 |
Pull: | #1198 (5 additions, 2 deletions, 1 files changed) |
Branch: | slaclab/RstSync-std_logic |
Notes:
Description
- Using "std_logic" instead of "sl" for generics due to issues with SystemVerilog handling VHDL subtype on generics properly
Updates to AxiLiteSaciMaster.vhd & SaciMaster2.vhd
Author: | Larry Ruckman ruckman@slac.stanford.edu |
Date: | Fri Sep 27 12:31:21 2024 -0700 |
Pull: | #1199 (22 additions, 8 deletions, 2 files changed) |
Branch: | slaclab/AxiLiteSaciMaster-asicRstL-aware |
Notes:
Description
Pgp4RxLiteLowSpeedLane.vhd Update
Author: | Larry Ruckman ruckman@slac.stanford.edu |
Date: | Mon Sep 30 09:13:03 2024 -0700 |
Pull: | #1200 (7 additions, 2 deletions, 1 files changed) |
Branch: | slaclab/Pgp4RxLiteLowSpeedLane |
Notes:
Description
- Mask off the Valid to the RX protocol until the gearbox is locked
_Qsfp.py Update
Author: | Larry Ruckman ruckman@slac.stanford.edu |
Date: | Wed Oct 2 11:03:34 2024 -0700 |
Pull: | #1203 (31 additions, 0 deletions, 1 files changed) |
Branch: | slaclab/Qsfp-TxDisable |
Notes:
Description
introduce rst_polarity feature to all pgp4txlite/pgp4rx modules to prepare for asic deployment
Author: | Larry Ruckman ruckman@slac.stanford.edu |
Date: | Tue Oct 1 19:27:41 2024 -0700 |
Pull: | #1204 (164 additions, 121 deletions, 15 files changed) |
Branch: | slaclab/pgp4lite-rstPolarity |
Notes:
introduce rst_polarity feature to all pgp4txlite/pgp4rx modules to prepare for asic deployment
(ASIC designs usually employ an active-LOW reset/i.e. a rstN/enable signal)
add RST_POLARITY_G to all modules.
note that I also added RST_POLARITY_G to RX-related modules because I use them in my local behavioral simulation (no receiver in ASICs are foreseen). Since the RST_POLARITY_G generic default values are consistent, the changes in the TX/RX modules hopefully should not have impact on existing designs.