Skip to content

New approach by IMO to measure a vessel's operational efficiency

License

Notifications You must be signed in to change notification settings

snascusat/CII-Calculator

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

3 Commits
 
 
 
 

Repository files navigation

CII Calculator

CII Overview

This is the new approach by IMO to measure a vessel's operational efficiency. The main takeaway from the CII is its ranking scheme which is based on the operational efficiency of ships, which will be a measure of how efficient ships are when transporting cargo and passengers

CII Rating Scheme

The rating scheme of CII ranges from A to E, where A is the most efficient ship. The rating parameters vary according to the type of ship. The rating is determined by comparing the required CII and attained CII. The figure below gives a clear idea about the rating and as well as the boundary names
1648557166261
If a vessel achieved E in a year or D in 3 years the vessel is expected to submit the correction plans and should obtain a ranking of C in the next year. More details on how to rank the vessel is given in the A/R Ratio section

Attained CII

The attained CII of the individual ship is calculated as the ratio of the total mass of CO2 emitted by the ship to the total transport worm undertaken in a calendar year

image

Where is M is the mass of CO2 emitted and W is the transport work done

Mass Of CO2 emission(M)

Total mass of CO2 emitted is the sum of emission from all the fuel consumed on board ship in a given calendar year image

Where j is the fuel oil type FCj is the total mass in grams of consumed fuel oil type j in a calendar year as reported under IMO DCS CFj represents the fuel oil mass to CO2 mass conversion factor for fuel oil type

Fuel mass to CO2 mass conversion factor

CF is a non-dimensional conversion factor between fuel consumption measured in g and CO2 emission also measured in g based on the carbon content

image

Transport Work (W)

This is the distance travelled by the ship in nautical mile in one calender year

image

Where C represents Capacity of the ship Dt represents total distance covered in one calender year under IMO DCS

Required CII

This is defined as the curve representing the median attained by the operating CII performance as a function of capacity image

Reference CII is the value of 2019, a and c are the parameters suggested in MEPC 337(76). The table containing suggested values of a and c is given below

image

How Capacity Is Determined?

In the above sections, we concluded that Attained CII and Required CII depend on the ship's capacity. The following criteria can determine the capacity of the ship

  • For bulk carriers, container ships, tankers, gas carriers, LNG carriers, ro-ro cargo ships, general cargo ships, refrigerated cargo carriers, and combination carriers DWT should be used
  • For cruise ships, ro-ro cargo,ro-pax ships GT should be used

A/R Ratio

This is the ratio between Attained CII and Reference CII. A higher value of the A/R ratio means more attained CII thus possibly more CO2 emitted by the ship. A higher value of A/R generally gives the worst-performing ships. Thus A/R ratio must be low in order to get a higher CII ranking. If the A/R ratio equals one means attained and required CII are the same thus it lies in exactly the middle of the rating scheme which is C
image

We can rank the vessels by comparing their exp(d) values and obtained A/R ratios.Lets take the example of oil tanker image

As the A/R ratio is less than exp(d1) the rating will be A. Similarly, the CII ranking of every vessel can be obtained by comparing the A/R ratio and their respective exp(d) values

About

New approach by IMO to measure a vessel's operational efficiency

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published