Skip to content

Balena based example application enabling both Cellular connectivity and ability to run modem/SIM AT commands

License

Notifications You must be signed in to change notification settings

soracom-labs/balena-cellular-AT

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

73 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Soracom's sample balena.io Application with Cellular modem AT commands support

This sample Application demonstrates how to use balena.io based App+Device to leverage Cellular modems which AT commands support
This Application also provides ability to scan available operators and leverage modem manager to select a specific operator
This has been tested on Raspberry Pi 3, Raspberry Pi Zero, Raspberry Pi B+ and Nvidia JETSON TX2. It has been designed to work on all current and future devices supported by balena.io

Notes

This Application implements two methods to talking to Modem Manager and Network Manager on balenaOS.
The first one uses mmcli command line interface which communicates through DBUS socket
The second one is the python-networkmanager python package which lets you write python code to interact with Network Manager, we've published a sample connection-add script soracom.py together with this sample Application

It is also important to note that we're using balena/python Docker container in this project, due to potential conflicts with udevd and Modem Manager, we keep udevd off in the container (through supplied entry.sh) which ensures highest level of balenaOS compatibility with Cellular modems
Be sure to use the latest version of balenaOS in order to have full support of your preferred Hardware

Not all Cellular modems let you run AT commands as some of them expose a NATed Ethernet interface rather than a serial interface that Modem Manager can interface with, we've tested the following Application with Huawei MS2131, MS2372, ME909, MU709 and Quectel EC21

Setup

  1. In order to use a 3G Dongle with balenaOS 2.x and Soracom, you will have two choices after creating your balena.io based App+Device:

    1. Start the device on WiFi or Ethernet and let the soracom.py script add the GSM connection in Network Manager for you
    2. Place the soracom GSM configuration file on your device's SD card in /system-connections/ using the following command: cp soracom /Volume/balena-boot/system-connections/
  2. In your balena.io Application, please make sure to set the following Fleet Configuration variables to ensure that your Cellular modem has enough power:

    1. BALENA_HOST_CONFIG_max_usb_current = 1
    2. BALENA_HOST_CONGIG_safe_mode_gpio = 4

1.You can also add the following Fleet Configuration variable to save bandwidth when pushing updates to your container: 1. BALENA_SUPERVISOR_DELTA = 1

balena.io environment variables

Our sample application uses environment variables to enable a couple of useful features which optimise bandwidth usage (Switch console logging on and off) and ensure Cellular based connectivity:

  • CELLULAR_ONLY: This option disables WiFi and Ethernet to ensure that the device solely uses Cellular connection
  • CONSOLE_LOGGING: Set to 0 in order to disable application logs in Balena device console, logs are always written to /data/soracom.log, keep if off in order to save on Cellular based bandwidth
  • SCAN_OPERATORS: Set to 1 in order to scan available operators
  • OPERATOR_ID: Set to your preferred Operator ID and your modem will check if it's available, try to switch to it, reboot the host to connect back to an available operator if there's an error

Running AT commands

Through ModemManager package, you can run AT commands on your Cellular modem.

To do so, we've set the following variable in our bashrc configuration which enables mmcli and python-networkmanager to communicate with BalenaOS DBUS:

export DBUS_SYSTEM_BUS_ADDRESS=unix:path=/host/run/dbus/system_bus_socket

With this in place, you can connect to balena remote Terminal (we recommend balena CLI with balena ssh command) and run AT commands as follow:

mmcli -m 0 --command=ATCOMMAND

For example, you could get your SIM card IMSI:

mmcli -m 0 --command=AT+CIMI

Likewise, if you would like to get a list of connected modem, you can run:

mmcli -L

Another usage example which we've added to our start.sh script is the AT+CSQ command which shows you your Cellular connection strength

mmcli -m 0 --command=AT+CSQ

The network RSSI (strength) can be read as follow: -100 dBm or less: Unacceptable signal, check antenna connection -99 dbm to -90 dBm: Weak signal -89 dbm to -70 dBm: Medium to high signal -69 dBm or greater: Strong signal

Credits

Feel free to visit our Soracom website if you'd like to get your Sim card and Dongle as well as learn more about various IoT topics
Dennis Kaarsemaker and his contributors for making the python-networkmanager library and code examples
And thank you to the folks at balena.io for making their awesome platform

Soracom Developers

About

Balena based example application enabling both Cellular connectivity and ability to run modem/SIM AT commands

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published