Minimal Raspberry Pi OS including cloud-init

This repo features a custom Raspberry Pi OS Lite image including cloud-init built with pi-gen.

TL;DR: How to use the image ⚙️

1. Download the image from GitHub:

   ARCH=armhf # either armhf or aarch64 (experimental)
   curl -sSL -o 2021-05-10-raspios-buster-$ARCH-lite-cloud-init.zip https://github.com/timebertt/pi-cloud-init/releases/download/2021-05-10/2021-05-10-raspios-buster-$ARCH-lite-cloud-init.zip && \
   unzip -o 2021-05-10-raspios-buster-$ARCH-lite-cloud-init.zip

2. Mount the boot partition (of the .img file) to add user-data, meta-data and optionally network-config files to the root of it. Unmount it again, once added.

3. Flash image to SD card using balena etcher, Raspberry Pi Imager or similar.

4. Insert SD card into Pi and power up! 🚀

Rationale 💡

Raspberry Pi OS is fairly easy to setup. Though, if you want to setup a Raspberry Pi cluster like Alex Ellis and the community have been doing for five years+, you will have to repeat some manual configuration steps like copying SSH keys, networking setup and so on for each Pi.

cloud-init is the de-facto standard for solving the same problem on cloud instances. It's baked into most cloud images, which makes cloud instances discover initialization and configuration data from the cloud provider's metadata service.

cloud-init can be used for bootstrapping Raspberry Pis as well, making it easy to configure networking, packages and remote access consistently across a fleet of Pis. Unfortunately, Raspberry Pi OS doesn't ship with cloud-init out of the box and thus requires manual installation and configuration.

This repo features a custom image based on Raspberry Pi OS Lite built with pi-gen with cloud-init preinstalled, which allows to pass initialization and configuration data (in form of meta-data, user-data and network-config files) to Pis via the boot image flashed to an SD card. This makes it easy to bootstrap multiple Pis in a plug-and-play fashion without attaching a monitor or manually SSHing into each one of them.

Why not simply use Ubuntu Server? ❓

Ubuntu Server comes with cloud-init preinstalled and also features a Raspberry Pi Image. It can be leveraged in a similar fashion to the image built by this project to bootstrap Pis. Though, in my tests Ubuntu Server already consumed more than 300MB of precious memory on my Pis without anything installed. Therefore I started building a custom image based on Raspberry Pi OS Lite, which consumes only roughly 60MB of memory out of the box.

Why not use k3os? ❓

k3os is a minimal OS designed to run k3s and be managed by kubectl. It also features a cloud-init-like configuration file, which can be used to easily configure hosts. Unfortunately, there are currently no official RPi images, but you can build one on your own by leveraging this project. In my tests, k3os performed quite well with some additional overhead in CPU and Memory usage. I chose to build my own images based on Raspberry Pi OS, because of the lower resource usage, the familiarity with Debian-based distros, flexibility in bootstrapping my clusters (not tied to k3s) and the endless resources on Raspberry Pi OS.

How to build the image 🚧

You can build the image yourself and customize the build along the way by following these steps.

1. Setup a Debian VM using vagrant which will build the image. This provides a clean build environment and additionally works on a Linux as well as macOS.

   # what image to build: either amrhf (default) or aarch64 (experimental)
   export ARCH=armhf
   vagrant up --provision

2. Start pi-gen build in the VM. This is going to take some time...

   vagrant ssh
   ./pi-cloud-init/build.sh

   When you want to rebuild from scratch (e.g. because you want to build for another arch), you can run

   vagrant ssh
   CLEAN=1 ./pi-cloud-init/build.sh

3. Transfer produced image to the host machine and unzip. This requires the vagrant-scp plugin, install it first by running:

   vagrant plugin install vagrant-scp

   zip_file=$(date +%Y-%m-%d)-raspios-buster-$ARCH-lite-cloud-init.zip && \
   vagrant scp raspios-builder:/home/vagrant/pi-cloud-init/$zip_file $zip_file && \
   unzip -o "$zip_file"

4. Customize user-data.yaml, meta-data.yaml and network-config.yaml for the instance you're setting up.

5. Mount boot partition to inject user-data, meta-data and network-config. (It's assuming a macOS machine, but you should be able to accomplish the same using mount and umount on Linux.)

   img_file="${zip_file%.zip}.img" && \
   volume="$(hdiutil mount "$img_file" | egrep -o '/Volumes/.+')" && \
   cp meta-data.yaml "$volume"/meta-data && \
   cp user-data.yaml "$volume"/user-data && \
   cp network-config.yaml "$volume"/network-config && \
   device="$(mount | grep "$volume" | cut -f1 -d' ' | egrep -o '/dev/disk.')" && \
   diskutil umountDisk "$device" && \
   diskutil eject "$device"

6. Optionally, you can verify the image and cloud-init functionality using dockerpi (only works with armhf images). It start a Docker container with QEMU in it emulating a Pi. This way you can already verify, that the image and the provided user-data is working without flashing a new SD card everytime.

   docker run -it -v $PWD/$img_file:/sdcard/filesystem.img lukechilds/dockerpi:vm
   ...
   cloud-init[96]: Cloud-init v. 20.2 running 'init-local' at Mon, 08 Mar 2021 19:54:02 +0000. Up 53.20 seconds.
   ...
   cloud-init[380]: Cloud-init v. 20.2 running 'init' at Mon, 08 Mar 2021 19:54:42 +0000. Up 93.34 seconds.
   ...
   cloud-init[568]: Cloud-init v. 20.2 running 'modules:config' at Mon, 08 Mar 2021 19:55:48 +0000. Up 159.10 seconds.
   ...
   cloud-init[620]: Cloud-init v. 20.2 running 'modules:final' at Mon, 08 Mar 2021 19:56:05 +0000. Up 175.50 seconds.
   cloud-init[620]: Cloud-init v. 20.2 finished at Mon, 08 Mar 2021 19:56:08 +0000. Datasource DataSourceNoCloud [seed=/dev/sda1][dsmode=net].  Up 179.17 seconds

7. Now, flash the image including cloud-init data to SD card, using balena etcher, Raspberry Pi Imager or similar.

8. Finally, SSH into your Pi and verify cloud-init functionality. By default, the pi user is locked and SSH password authentication is disabled, so make sure to add a custom user with ssh_authorized_keys to your user-data.

   ssh your-user@your-pi
   less /var/log/cloud-init-output.log

Next steps 🏃

Play around with user-data 🎮

Find some more user-data examples under examples:

• Simple user-data
• Static IPv4

More fun 🎉

Spin up a Kubernetes cluster 🤓

examples/k3s-cluster contains some user-data files for spinning up a Kubernetes cluster using k3s. Use the set of user-data files in raspberry-0 for bootstrapping your cluster (i.e. for the first Pi). After that, join any number of servers and agents using the user-data files in raspberry-1.

The examples already include configuration for:

• kube-vip in layer 2 mode (ARP) for API server load balancing
  • provides an HA control plane endpoint to perform rolling updates on k3s servers (drain, install, reboot one by one)
  • only used for control plane load balancing
• MetalLB in layer 2 mode (ARP) for LoadBalancer Services
  • also includes LoadBalancer IP allocation address ranges specified in configuration ConfigMap (built-in and easier to configure than kube-vip)
  • not used for control plane load balancing (not supported, ref metallb/metallb#168)
  • klipper-lb is disabled, as it can't provide a dedicated LoadBalancer IP on your local network (just uses host ports to make LoadBalancer services accessible)

Get the kubeconfig from raspberry-0 and modify it to use the API server LoadBalancer IP:

mkdir -p $HOME/.kube/configs/home && \
ssh tim@192.168.0.20 sudo cat /etc/rancher/k3s/k3s.yaml > $HOME/.kube/configs/home/pi-cluster.yaml && \
export KUBECONFIG=$HOME/.kube/configs/home/pi-cluster.yaml && \
kubectl config rename-context default pi-cluster && \
kubectl config set clusters.default.server https://192.168.0.30:6443

Check if all Nodes were bootstrapped and got ready:

$ kubectl get no -owide
NAME          STATUS   ROLES                       AGE     VERSION        INTERNAL-IP    EXTERNAL-IP   OS-IMAGE                       KERNEL-VERSION   CONTAINER-RUNTIME
raspberry-0   Ready    control-plane,etcd,master   18m     v1.20.5+k3s1   192.168.0.20   <none>        Debian GNU/Linux 10 (buster)   5.10.17-v8+      containerd://1.4.4-k3s1
raspberry-1   Ready    control-plane,etcd,master   11m     v1.20.5+k3s1   192.168.0.21   <none>        Debian GNU/Linux 10 (buster)   5.10.17-v8+      containerd://1.4.4-k3s1
raspberry-2   Ready    control-plane,etcd,master   9m13s   v1.20.5+k3s1   192.168.0.22   <none>        Debian GNU/Linux 10 (buster)   5.10.17-v8+      containerd://1.4.4-k3s1