Non Spartan FPGA IO Speeds

For 720p60 / 1080p30 - pixel clock 75MHz, bit rate 750Mbit/s For 1080p60 - pixel clock 150MHz, bit rate 1500Mbit/s

Altera Max10 / Cyclone V parts

From http://mradigital.com/downloads/dl/file/id/68/hdmi_rx_phy_core.pdf

For MAX10 devices, the maximum supported HDMI resolution is 1280 x 720 with 60 Hz refresh rate which translates to pixel clock of 74.25 MHz and a line rate of 742.5 Mbps. These maximum performance results are based on commercial MAX10 Speed Grade-6 devices.

For Cyclone V devices, the maximum supported HDMI resolution is 1280 x 1024 with 60 Hz refresh rate which translates to pixel clock of 108 MHz and a line rate of 1.08 Gbps. These maximum performance results are based on commercial Cyclone V Speed Grade-6 devices.

Speed grade –I6, –A6, –C7, –I7 parts have the same IO speed.

https://www.digikey.com/short/3vzdw9 -- Max10 parts on Digikey

| 544-3133-2-ND | 10M02DCV36C8G | 27 I/O | 36WLCSP | 2.95361 @ qty 1000 | MAX® 10 |

Lattice Parts

From http://www.latticesemi.com/en/Products/DesignSoftwareAndIP/IntellectualProperty/ReferenceDesigns/ReferenceDesign04/71LVDSVideoInterfaceXO2XO3ECP5.aspx

http://www.latticesemi.com/About/Newsroom/PressReleases/2015/20151026900MbpsMIPIDPHYSupport.aspx

MachXO3L and MachXO3LF devices can now be used for bridging HD (1920x1080@60fps) and WQHD (2560x1440@60fps) displays as well as 4K@60fps with a wide variety of image sensors and processors. The MachXO3 family is available in Wafer Level Chip-scale packages (0.4mm ball pitch) and Flip-chip-BGA (csfBGA package 0.5mm Ball pitch) that are ideal for high performance, small form-factor applications.

https://www.digikey.com/short/3v4779 - MachX03 parts on Digikey

| 220-1931-2-ND | LCMXO3L-1300E-5UWG36CTR50 | 28 I/O | 36WLCSP | 2.13020 @ qty 1000 | MachXO3 |