Vault Java Driver

This is a fork of the zero-dependency Java client for the Vault secrets management solution from HashiCorp.

This driver strives to implement Vault's full HTTP API, along with supporting functionality such as automatic retry handling. It does so without relying on any other external libraries beyond the Java standard library, and is compatible with Java 7 and up. So it will play nice with all of your projects, greenfield and legacy alike, without causing conflicts with any other dependency.

Table of Contents

• Installing the Driver
• Initializing a Driver Instance
• Key/Value Secret Engine Config
• SSL Config
  • General Options
  • Java Keystore (JKS) based config
  • OpenSSL (PEM) based config
• Using the driver
• API Reference (Javadocs)
• Version History
• Development
• License
• Other Notes

Installing the Driver

The driver is available from Maven Central, for all modern Java build systems.

Gradle:

dependencies {
    compile('se.tink:vault-java-driver:4.0.0-tink')
}

Maven:

<dependency>
    <groupId>se-tink</groupId>
    <artifactId>vault-java-driver</artifactId>
    <version>4.0.0-tink</version>
</dependency>

Initializing a Driver Instance

The com.bettercloud.vault.VaultConfig class is used to initialize a driver instance with desired settings. In the most basic use cases, where you are only supplying a Vault server address and perhaps a root token, there are convenience constructor methods available:

final VaultConfig config = new VaultConfig()
                                  .address("http://127.0.0.1:8200")
                                  .token("3c9fd6be-7bc2-9d1f-6fb3-cd746c0fc4e8")
                                  .build();

// You may choose not to provide a root token initially, if you plan to use
// the Vault driver to retrieve one programmatically from an auth backend.
final VaultConfig config = new VaultConfig().address("http://127.0.0.1:8200").build();

To explicitly set additional config parameters (*), you can use a builder pattern style to construct the VaultConfig instance. Either way, the initialization process will try to populate any unset values by looking to environment variables.

final VaultConfig config =
    new VaultConfig().
        .address("http://127.0.0.1:8200")               // Defaults to "VAULT_ADDR" environment variable
        .token("3c9fd6be-7bc2-9d1f-6fb3-cd746c0fc4e8")  // Defaults to "VAULT_TOKEN" environment variable
        .openTimeout(5)                                 // Defaults to "VAULT_OPEN_TIMEOUT" environment variable
        .readTimeout(30)                                // Defaults to "VAULT_READ_TIMEOUT" environment variable
        .sslConfig(new SslConfig().build())             // See "SSL Config" section below
        .build();

Once you have initialized a VaultConfig object, you can use it to construct an instance of the Vault primary driver class:

final Vault vault = new Vault(config);

Key Value Secret Engine Config

Shortly before its 1.0 release, Vault added a Version 2 of its Key/Value Secrets Engine. This supports some addition features beyond the Version 1 that was the default in earlier Vault builds (e.g. secret rotation, soft deletes, etc).

Unfortunately, K/V V2 introduces some breaking changes, in terms of both request/response payloads as well as how URL's are constructed for Vault's REST API. Therefore, version 4.0.0 of this Vault Driver likewise had to introduce some breaking changes, to allow support for both K/V versions.

• If you are using the new K/V V2 across the board, then no action is needed. The Vault Driver now assumes this by default.

• If you are still using the old K/V V1 across the board, then you can use the Vault class constructor: public Vault(final VaultConfig vaultConfig, final Integer engineVersion), supplying a 1 as the engine version parameter. constructor, then you can declare whether to use Version 1 or 2 across the board.

• If you are using a mix, of some secret paths mounted with V1 and others mounted with V2, then you have two options:

  • You can explicitly specify your Vault secret paths, and which K/V version each one is using. Construct your Vault objects with the constructor public Vault(final VaultConfig vaultConfig, final Boolean useSecretsEnginePathMap, final Integer globalFallbackVersion).
    Within the VaultConfig object, supply a map of Vault secret paths to their associated K/V version (1 or 2).

  • You can rely on the Vault Driver to auto-detect your mounts and K/V versions upon instantiation. Use the same constructor as above, but leave the map null. Note that this option requires your authentication credentials to have access to read Vault's /v1/sys/mounts path.

SSL Config

If your Vault server uses a SSL certificate, then you must supply that certificate to establish connections. Also, if you are using certificate-based client authentication, then you must supply a client certificate and private key that have been previously registered with your Vault server.

SSL configuration has been broken off from the VaultConfig class, and placed in its own SslConfig class. This class likewise using a builder pattern.

General Options

.verify(false)    // Defaults to "VAULT_SSL_VERIFY" environment variable (or else "true")

To disable SSL certificate verification altogether, set sslVerify(false). YOU SHOULD NOT DO THIS IS A REAL PRODUCTION SETTING! However, it can be useful in a development or testing server context. If this value is explicitly set to false, then all other SSL config is basically unused.

Java Keystore (JKS) based config

You can provide the driver with a JKS truststore, containing Vault's server-side certificate for basic SSL, using one of the following three options:

.trustStore(object) - Supply an in-memory java.security.KeyStore file, containing Vault server cert(s) that can be trusted.

.trustStoreFile(path) - Same as the above, but the path references a JKS file on the filesystem.

.trustStoreResource(path) - Same as the above, but the path references a classpath resource rather than a filesystem path (e.g. if you've bundled the JKS file into your application's JAR, WAR, or EAR file).

If you are only using basic SSL, then no keystore need be provided. However, if you would like to use Vault's TLS Certificate auth backend for client side auth, then you need to provide a JKS keystore containing your client-side certificate and private key:

.keyStore(object, password) - Supply an in-memory java.security.KeyStore file containing a client certificate and private key, and the password needed to access it (can be null). can be trusted.

.keyStoreFile(path, password) - Same as the above, but the path references a JKS file on the filesystem.

.keyStoreResource(path, password) - Same as the above, but the path references a classpath resource rather than a filesystem path (e.g. if you've bundled the JKS file into your application's JAR, WAR, or EAR file).

NOTE: JKS-based config trumps PEM-based config (see below). If for some reason you build an SslConfig object with both JKS and PEM data present, then only the JKS data will be used. You cannot "mix-and-match", providing a JKS-based truststore and PEM-based client auth data.

OpenSSL (PEM) based config

To supply Vault's server-side certificate for basic SSL, you can use one of the following three options:

.pemFile(path) - Supply the path to an X.509 certificate in unencrypted PEM format, using UTF-8 encoding (defaults to "VAULT_SSL_CERT" environment variable).

.pemResource(path) - Same as above, but the path references a classpath resource rather than a filesystem path (e.g. if you've bundled the PEM file into your applications's JAR, WAR, or EAR file).

.pemUTF8(contents) - The string contents extracted from the PEM file. For Java to parse the certificate properly, there must be a line-break in between the certificate header and body (see the SslConfig Javadocs for more detail).

If SSL verification is enabled, no JKS-based config is provided, AND none of these three methods are called, then SslConfig will by default check for a VAULT_SSL_CERT environment variable. If that's setw then it will be treated as a filesystem path.

To use Vault's TLS Certificate auth backend for SSL client auth, you must provide your client certificate and private key, using some pair from the following options:

.clientPemUTF8(path) - Supply the path to an X.509 certificate in unencrypted PEM format, using UTF-8 encoding.

.clientPemResource(path) - Same as above, but the path references a classpath resource rather than a filesystem path (e.g. if you've bundled the PEM file into your applications's JAR, WAR, or EAR file).

.clientPemUTF8(contents) - The string contents extracted from the PEM file. For Java to parse the certificate properly, there must be a line-break in between the certificate header and body (see the SslConfig Javadocs for more detail).

.clientKeyPemUTF8(path) - Supply the path to an RSA private key in unencrypted PEM format, using UTF-8 encoding.

.clientKeyPemResource(path) - Same as above, but the path references a classpath resource rather than a filesystem path (e.g. if you've bundled the PEM file into your applications's JAR, WAR, or EAR file).

.clientKeyPemUTF8(contents) - The string contents extracted from the PEM file. For Java to parse the certificate properly, there must be a line-break in between the certificate header and body (see the SslConfig Javadocs for more detail).

Using the Driver

Like the VaultConfig class, Vault too supports a builder pattern DSL style:

final Map<String, String> secrets = new HashMap<String, String>();
secrets.put("value", "world");
secrets.put("other_value", "You can store multiple name/value pairs under a single key");

// Write operation
final LogicalResponse writeResponse = vault.logical()
                                        .write("secret/hello", secrets);

...

// Read operation
final String value = vault.logical()
                       .read("secret/hello")
                       .getData().get("value");

Vault has a number of methods for accessing the classes that implement the various endpoints of Vault's HTTP API:

• logical(): Contains core operations such as reading and writing secrets.
• auth(): Exposes methods for working with Vault's various auth backends (e.g. to programmatically retrieve a token by authenticating with a username and password).
• pki(): Operations on the PKI backend (e.g. create and delete roles, issue certificate credentials).
• debug(): Health check endpoints.

The driver DSL also allows you to specify retry logic, by chaining the withRetries() ahead of accessing the endpoint implementation:

// Retry up to 5 times if failures occur, waiting 1000 milliseconds in between each retry attempt.
final LogicalResponse response = vault.withRetries(5, 1000)
                                   .logical()
                                   .read("secret/hello");

API Reference (Javadocs)

Full Javadoc documentation.

Version History

Note that changes to the major version (i.e. the first number) represent possible breaking changes, and may require modifications in your code to migrate. Changes to the minor version (i.e. the second number) should represent non-breaking changes. The third number represents any very minor bugfix patches.

• 4.0.0: This is a breaking-change release, with two primary updates:

  • Adds support for Version 2 of the Key/Value Secrets Engine. The driver now assumes that your Vault instance uses Version 2 of the Key/Value Secrets Engine across the board. To configure this, see the Key/Value Secret Engine Config section above.
  • Adds support for the namespaces feature of Vault Enterprise.

• 3.1.0: Several updates.

  • Adds support for seal-related operations (i.e. /sys/seal, /sys/unseal, /sys/seal-status).
  • Adds support for the AWS auth backend.
  • Adds support for the Google Cloud Platform auth backend.
  • Adds support for the LDAP auth Backend.
  • Allows auth backend methods to be configured for non-default mount points.
  • Adds "revoke-self" capability for auth tokens.
  • Adds support for response-wrapping token validation
  • Support for signing a new certificate based on a CSR (i.e. the /v1/pki/sign endpoint).
  • Support for the PKI backend revoke method, and addition of a useCsrSans property in PKI role object
  • Gives VaultConfig the ability to disable loading from environment variables if desired.
  • Cleans up issues with the new Docker-based integration test suite.
  • Updates all dependencies to their latest versions (including switching to Vault 0.9.1 for integration testing).

• 3.0.0: This is a breaking-change release, with several updates.

  • API changes:
    • Adds support for writing arbitrary objects to Vault, instead of just strings (i.e. the com.bettercloud.vault.api.Logical.write(...) method now accepts a Map<String. Object> rather than a Map<String, String>).
    • Refactors the VaultConfig class, forcing use of the builder pattern and breaking off SSL-related config into a separate SslConfig class.
    • Refactors the Auth.createToken() method, to encapsulate the possible options within a config object rather than having the method signature contain 8 optional arguments.
  • SSL and Auth Backend support:
    • Adds support for authenticating with the TLS Certificate auth backend.
    • Updates SSL support in general, allowing users to configure the driver with Java-friendly JKS keystore and truststore files (in addition to continuing to support Vault-friendly PEM format).
    • Implements the /v1/auth/token/lookup-self endpoint.
    • Supports creating tokens against a role.
  • Major re-vamp of the integration test suite:
    • The tests now use the TestContainers library to setup and launch a Vault server instance from within a Docker container, in a completely automated manner. You no longer have to manually configure and run a Vault server to use the test suite!
    • The tests are now going against a regular Vault server, rather than one running in "dev mode". Therefore, they are now able to use HTTPS connections rather than plain HTTP.
    • Upgrades tests to use Java 8 (although the library itself still targets Java 7).
  • Misc / quality-of-life:
    • Includes the REST response body in VaultException messages for basic read and write operations.
    • Makes numerous classes implement Serializable.
    • Upgrades the project to Gradle 4.0.

• 2.0.0: This is breaking-change release, with numerous deprecated items cleaned up.

  • Adds support for authentication via the AppRole auth backend.
  • Adds support for renewing secret leases.
  • Removes the com.bettercloud.vault.api.Sys class, deprecated in the 1.2.0 release.
  • Removes the com.bettercloud.vault.api.Auth.loginByUsernamePassword method, deprecated in the 1.2.0 release.
  • Removes the fields leaseId, leaseDuration, and renewable from the VaultResponse base class, instead including them only in the subclasses for specific response types where they are found.
  • Changes the com.bettercloud.vault.response.AuthReponse class field authLeaseDuration from type int to long.
  • Refactors and removes various deprecated private methods, with no change to the exposed API.

• 1.2.0: This is a substantial release, with numerous additions. It's a minor version number only because there should be no breaking changes. The changes include the following:

  • Switches from Vault 0.5.x to 0.6.x for automated tests.
  • Adds a field to VaultException for capturing the HTTP response code (if any) from Vault.
  • Updates the Gradle build, so that you no longer need empty placeholder values for certain variables elsewhere in your environment.
  • Updates integration test suite to account for breaking changes in Vault 0.6.x (e.g. you can no longer use a token that was obtained from one of the authentication backends to perform tasks such as creating and deleting roles, etc).
  • Deprecates the App ID authentication backend, and adds a new version of the Userpass authentication backend that doesn't require a path prefix. Adds support for the GitHub authentication backend.
  • If the VAULT_TOKEN environment parameter is not set, then the driver will now check for a file named .vault-token in the executing user's home directory, and try to read a token value from that.
  • Deprecates the com.bettercloud.vault.api.Sys class, moving the debug-related methods into their own specific com.bettercloud.vault.api.Debug class instead.
  • Implements some of the lease related endpoints (i.e. revoke, revoke-prefix, revoke-force).
  • Supports PKI backends that are mounted on non-default paths.

• 1.1.1: Changes the ttl argument to Pki.issue() from Integer to String, to fix a bug preventing you from specifying the time suffix (e.g. "1h").

• 1.1.0: Switches from Vault 0.4.x to 0.5.x for automated tests. Adds support to the Logical API wrapper for listing and deleting secrets. Implements the /v1/sys/health health-check HTTP API endpoint. Implements portions of the PKI backend (e.g. creating and deleting roles, issuing credentials). Marks numerous methods as deprecated, to be removed in a future major release.

• 1.0.0: Drops support for Java 6. Removes all methods marked as @Deprecated in version 0.5.0. Adds support for response metadata (i.e. "lease_id", "renewable", "lease_duration") to all response types, rather than just AuthResponse. Changes leaseDuration type from int to Long in AuthResponse. Removes final declarations on all classes (outside of the JSON package). Various bugfixes. Adds support for auth token self-renewal. Adds support for writing values that return content.

• 0.5.0: Adds support for supplying SSL certificates, and for toggling whether or not the Vault server's SSL certificate will be verified. Also adds support for "openTimeout" and "readTimeout" settings. Deprecates the "timeout", "sslTimeout", "proxyAddress", "proxyPort", "proxyUsername", and "proxyPassword" settings (the proxy settings may return in a future version, but it's too misleading to have methods exposed for settings that won't really be supported soon).

• 0.3.0: Initial public release. Support for writing and reading secrets, authenticating with the "AppID" or "Username & Password" auth backends. All over-the-wire methods support automatic retry logic.

Development

Pull requests are welcomed for bugfixes or enhancements that do not alter the external facing class and method signatures. For any breaking changes that would alter the contract provided by this driver, please open up an issue to discuss it first.

All code changes should include unit test and/or integration test coverage as appropriate. Unit tests are any that can be run in isolation, with no external dependencies. Integration tests are those which require a Vault server instance (at least a Dev Server) up and running.

Unit tests are located under the src/test directory, and can be run with the Grade unitTest task.

Integration tests are located under the src/test-integration directory, and can be run with the Gradle integrationTest task. See the additional README.md file in this directory for more detailed information.

License

The MIT License (MIT)

Copyright (c) 2016-2019 BetterCloud

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Other Notes

The Vault server system itself is a product of HashiCorp, a completely separate organization.

This client driver adapts JSON parsing code from Ralf Sternberg's excellent minimal-json library, likewise available under the MIT License. Package names have all been changed, to prevent any conflicts should you happen to be using a different version of that library elsewhere in your project dependencies.