A small Arduino library for GSM modules, that just works

Ai-Thinker A9/A9G GPRS (with GPS(A9G)) module C development SDK

Example of using ESP32 with GSM modem and lwip+pppos

GTP (GPRS Tunneling Protocol) implemented in pure Golang.

GSM+GPRS Radio Access Network Node reloaded for 2024 for newest UHD drivers and supporting Ubuntu 22.04

User Plane Gateway (UPG) based on VPP

STM32 HAL library for SIM800 release MQTT client over AT command

Arduino driver for GSM/GPRS module SIMCom SIM800L to make HTTP/S connections with GET and POST methods

MicroPython implementation on Ai-Thinker GPRS module A9 (RDA8955)

Datalogger for MicroPython and CPython.

GPS IoT tracker board for scanning gps and environment information and sending this to a MQTT server via GPRS.

Arduino-compatible MCU firmware code for sensor-, telemetry-, and gateway-appliances.

5G User Plane Function (UPF) based on VPP

Osmocom Transceiver used by GSM Base Transceiver Station (BTS); mirrored from https://gitea.osmocom.org/cellular-infrastructure/osmo-trx

lwIP PPP porting for GSM modem (like sim800)

Internetgateway with TTGO T-Call

Simple GSM shield Manager for Blynk and ESP32 / ESP8266 boards, with or without SSL, configuration data saved in SPIFFS / EEPROM. This library enables user to include both Blynk GSM/GPRS and WiFi libraries in one sketch, run both WiFi and GSM/GPRS simultaneously, or select one to use at runtime after reboot.

Osmocom Gateway GPRS Support Node; Mirror of https://gitea.osmocom.org/cellular-infrastructure/osmo-ggsn

IoT Communications Module for Energy Access. An easy way to get production ready, bi-directional communications for your IoT embedded device. Proiect supported by the EnAccess Foundation - https://enaccess.org

Connected GPS tracker PCB