Temper is a compact temperature sensor based on ESP8266 and SHT30 with large 13x7 pixel led display.

SHT30 full function driver library for general MCU and Linux.

Air quality modules with Nordic nRF52840. Thread network (OpenThread). TheThingsIO. Sensirion. SPEC Sensors. ST Microelectronics.

Low-cost sensor node device using solar energy and a sx1276 LoRa transmitter for a Wireless Sensor Network.

SHT30 Humidity and Temperature Sensor

Radio receiver

ESP8266 MQTT Sensor Node (in deep sleep) based on homie-esp8266. Support DHT11, DHT22, BME280, SHT30, SHT31.

A micropython project for wemos d1 mini with wemos SHT30 sensor publishing values to an influxdb instance

Arduino sketch for ESP8266 to report temperature/humidity from a SHT30 sensor to an MQTT server

Temperature & humidity sensor Thing using ESP8266 + MQTT + SHT30. Built with PlatformIO and Homie

Micropython modules for the M5Stamp C3U

A micropython project for wemos d1 mini with wemos SHT30 sensor using mqtt as transport

Extended version of a WiFi Cloud Controller based on ESP8266 and Blynk, works with BME280, SHT3x, HTU21, DS18B20 probes for controlling temperature, humidity or both.

Display temperature and humidity on ePaper without flashing

Measure temperature and humidity with the Sensiron SHT3x sensor.

MicroPython driver for the SHT31 Temperature and Humidity Sensor

Household temperature and humidity monitoring based on Tuya Smart

Raspberry Pi Pico W temperature and humidity with SHT30.

Example STM32 and cooperative-multitasking OS ( QuarkTS )

The scripts are collecting data from IoT sensors and storing, displaying and sending it to a remote monitoring system.