test-fuzz

test-fuzz is a Cargo subcommand and a collection of Rust macros to automate certain tasks related to fuzzing with afl.rs, including:

generating a fuzzing corpus
implementing a fuzzing harness

test-fuzz accomplishes these (in part) using Rust's testing facilities. For example, to generate a fuzzing corpus, test-fuzz records a target's arguments each time it is called during an invocation of cargo test. Similarly, test-fuzz implements a fuzzing harness as an additional test in a cargo-test-generated binary. This tight integration with Rust's testing facilities is what motivates the name test-fuzz.

Contents

Installation
Overview
Components
test-fuzz package features
Auto-generated corpus files
Environment variables
Limitations
Tips and tricks
[Semantic versioning policy]
License

Installation

Install cargo-test-fuzz and afl.rs with the following command:

cargo install cargo-test-fuzz cargo-afl

Overview

Fuzzing with test-fuzz is essentially three steps:*

Identify a fuzz target:
- Add the following dependencies to the target crate's Cargo.toml file:
```
serde = "*"
test-fuzz = "*"
```
- Precede the target function with the test_fuzz macro:
```
#[test_fuzz::test_fuzz]
fn foo(...) {
    ...
}
```
Generate a corpus by running cargo test:
```
cargo test
```
Fuzz your target by running cargo test-fuzz:
```
cargo test-fuzz foo
```

* An additional, preliminary step may be necessary following a reboot:

cargo afl system-config

Note that the above command runs sudo internally. Hence, you may be prompted to enter your password.

Components

`test_fuzz` macro

Preceding a function with the test_fuzz macro indicates that the function is a fuzz target.

The primary effects of the test_fuzz macro are:

Add instrumentation to the target to serialize its arguments and write them to a corpus file each time the target is called. The instrumentation is guarded by #[cfg(test)] so that corpus files are generated only when running tests (however, see enable_in_production below).
Add a test to read and deserialize arguments from standard input and apply the target to them. The test checks an environment variable, set by cargo test-fuzz, so that the test does not block trying to read from standard input during a normal invocation of cargo test. The test is enclosed in a module to reduce the likelihood of a name collision. Currently, the name of the module is target_fuzz, where target is the name of the target (however, see rename below).

Arguments

`bounds = "where_predicates"`

Impose where_predicates (e.g., trait bounds) on the struct used to serialize/deserialize arguments. This may be necessary, e.g., if a target's argument type is an associated type. For an example, see associated_type.rs in this repository.

`generic_args = "parameters"`

Use parameters as the target's type parameters when fuzzing. Example:

#[test_fuzz(generic_args = "String")]
fn foo<T: Clone + Debug + Serialize>(x: &T) {
    ...
}

Note: The target's arguments must be serializable for every instantiation of its type parameters. But the target's arguments are required to be deserializable only when the target is instantiated with parameters.

`impl_generic_args = "parameters"`

Use parameters as the target's Self type parameters when fuzzing. Example:

#[test_fuzz_impl]
impl<T: Clone + Debug + Serialize> for Foo {
    #[test_fuzz(impl_generic_args = "String")]
    fn bar(&self, x: &T) {
        ...
    }
}

Note: The target's arguments must be serializable for every instantiation of its Self type parameters. But the target's arguments are required to be deserializable only when the target's Self is instantiated with parameters.

`convert = "X, Y"`

When serializing the target's arguments, convert values of type X to type Y using Y's implementation of From<X>, or of type &X to type Y using Y's implementation of the non-standard trait test_fuzz::FromRef<X>. When deserializing, convert those values back to type X using Y's implementation of the non-standard trait test_fuzz::Into<X>.

That is, use of convert = "X, Y" must be accompanied by certain implementations. If X implements Clone, then Y may implement the following:

impl From<X> for Y {
    fn from(x: X) -> Self {
        ...
    }
}

If X does not implement Clone, then Y must implement the following:

impl test_fuzz::FromRef<X> for Y {
    fn from_ref(x: &X) -> Self {
        ...
    }
}

Additionally, Y must implement the following (regardless of whether X implements Clone):

impl test_fuzz::Into<X> for Y {
    fn into(self) -> X {
        ...
    }
}

The definition of test_fuzz::Into is identical to that of std::convert::Into. The reason for using a non-standard trait is to avoid conflicts that could arise from blanket implementations of standard traits.

`enable_in_production`

Generate corpus files when not running tests, provided the environment variable TEST_FUZZ_WRITE is set. The default is to generate corpus files only when running tests, regardless of whether TEST_FUZZ_WRITE is set. When running a target from outside its package directory, set TEST_FUZZ_MANIFEST_PATH to the path of the package's Cargo.toml file.

WARNING: Setting enable_in_production could introduce a denial-of-service vector. For example, setting this option for a function that is called many times with different arguments could fill up the disk. The check of TEST_FUZZ_WRITE is meant to provide some defense against this possibility. Nonetheless, consider this option carefully before using it.

`execute_with = "function"`

Rather than call the target directly:

construct a closure of type FnOnce() -> R, where R is the target's return type, so that calling the closure calls the target;
call function with the closure.

Calling the target in this way allows function to set up the call's environment. This can be useful, e.g., for fuzzing Substrate externalities.

`no_auto_generate`

Do not try to auto-generate corpus files for the target.

`only_generic_args`

Record the target's generic args when running tests, but do not generate corpus files and do not implement a fuzzing harness. This can be useful when the target is a generic function, but it is unclear what type parameters should be used for fuzzing.

The intended workflow is: enable only_generic_args, then run cargo test followed by cargo test-fuzz --display generic-args. One of the resulting generic args might be usable as generic_args's parameters. Similarly, generic args resulting from cargo test-fuzz --display impl-generic-args might be usable as impl_generic_args's parameters.

Note, however, that just because a target was called with certain parameters during tests, it does not imply the target's arguments are serializable/deserializable when those parameters are used. The results of --display generic-args/--display impl-generic-args are merely suggestive.

`rename = "name"`

Treat the target as though its name is name when adding a module to the enclosing scope. Expansion of the test_fuzz macro adds a module definition to the enclosing scope. By default, the module is named as follows:

If the target does not appear in an impl block, the module is named target_fuzz, where target is the name of the target.
If the target appears in an impl block, the module is named path_target_fuzz, where path is the path of the impl's Self type converted to snake case and joined with _.

However, use of this option causes the module to instead be named name_fuzz. Example:

#[test_fuzz(rename = "bar")]
fn foo() {}

// Without the use of `rename`, a name collision and compile error would result.
mod foo_fuzz {}

Serde field attributes on function arguments

The test_fuzz macro allows Serde field attributes to be applied to function arguments. This provides another tool for dealing with difficult types.

The following is an example. Traits serde::Serialize and serde::Deserialize cannot be derived for Context because it contains a Mutex. However, Context implements Default. So applying #[serde(skip)] to the Context argument causes it to be skipped when serializing, and to take its default value when deserializing.

use std::sync::Mutex;

// Traits `serde::Serialize` and `serde::Deserialize` cannot be derived for `Context` because it
// contains a `Mutex`.
#[derive(Default)]
struct Context {
    lock: Mutex<()>,
}

impl Clone for Context {
    fn clone(&self) -> Self {
        Self {
            lock: Mutex::new(()),
        }
    }
}

#[test_fuzz::test_fuzz]
fn target(#[serde(skip)] context: Context, x: i32) {
    assert!(x >= 0);
}

Note that when Serde field attributes are applied to an argument, the test_fuzz macro performs no other conversions on the argument.

`test_fuzz_impl` macro

Whenever the test_fuzz macro is used in an impl block, the impl must be preceded with the test_fuzz_impl macro. Example:

#[test_fuzz_impl]
impl Foo {
    #[test_fuzz]
    fn bar(&self, x: &str) {
        ...
    }
}

The reason for this requirement is as follows. Expansion of the test_fuzz macro adds a module definition to the enclosing scope. However, a module definition cannot appear inside an impl block. Preceding the impl with the test_fuzz_impl macro causes the module to be added outside the impl block.

If you see an error like the following, it likely means a use of the test_fuzz_impl macro is missing:

error: module is not supported in `trait`s or `impl`s

test_fuzz_impl currently has no options.

`cargo test-fuzz` command

The cargo test-fuzz command is used to interact with fuzz targets, and to manipulate their corpora, crashes, hangs, and work queues. Example invocations include:

List fuzz targets
```
cargo test-fuzz --list
```
Display target foo's corpus
```
cargo test-fuzz foo --display corpus
```
Fuzz target foo
```
cargo test-fuzz foo
```
Replay crashes found for target foo
```
cargo test-fuzz foo --replay crashes
```

Usage

Usage: cargo test-fuzz [OPTIONS] [TARGETNAME] [-- <ARGS>...]

Arguments:
  [TARGETNAME]  String that fuzz target's name must contain
  [ARGS]...     Arguments for the fuzzer

Options:
      --backtrace                 Display backtraces
      --consolidate               Move one target's crashes, hangs, and work queue to its corpus; to
                                  consolidate all targets, use --consolidate-all
      --cpus <N>                  Fuzz using at most <N> cpus; default is all but one
      --display <OBJECT>          Display corpus, crashes, generic args, `impl` generic args, hangs,
                                  or work queue. By default, an uninstrumented fuzz target is used.
                                  To display with instrumentation, append `-instrumented` to
                                  <OBJECT>, e.g., --display corpus-instrumented.
      --exact                     Target name is an exact name rather than a substring
      --exit-code                 Exit with 0 if the time limit was reached, 1 for other
                                  programmatic aborts, and 2 if an error occurred; implies --no-ui,
                                  does not imply --run-until-crash or --max-total-time <SECONDS>
      --features <FEATURES>       Space or comma separated list of features to activate
      --list                      List fuzz targets
      --manifest-path <PATH>      Path to Cargo.toml
      --max-total-time <SECONDS>  Fuzz at most <SECONDS> of time (equivalent to -- -V <SECONDS>)
      --no-default-features       Do not activate the `default` feature
      --no-run                    Compile, but don't fuzz
      --no-ui                     Disable user interface
  -p, --package <PACKAGE>         Package containing fuzz target
      --persistent                Enable persistent mode fuzzing
      --pretty                    Pretty-print debug output when displaying/replaying
      --replay <OBJECT>           Replay corpus, crashes, hangs, or work queue. By default, an
                                  uninstrumented fuzz target is used. To replay with instrumentation
                                  append `-instrumented` to <OBJECT>, e.g., --replay
                                  corpus-instrumented.
      --reset                     Clear fuzzing data for one target, but leave corpus intact; to
                                  reset all targets, use --reset-all
      --resume                    Resume target's last fuzzing session
      --run-until-crash           Stop fuzzing once a crash is found
      --slice <SECONDS>           If there are not sufficiently many cpus to fuzz all targets
                                  simultaneously, fuzz them in intervals of <SECONDS> [default:
                                  1200]
      --test <NAME>               Integration test containing fuzz target
      --timeout <TIMEOUT>         Number of seconds to consider a hang when fuzzing or replaying
                                  (equivalent to -- -t <TIMEOUT * 1000> when fuzzing)
      --verbose                   Show build output when displaying/replaying
  -h, --help                      Print help
  -V, --version                   Print version

Try `cargo afl fuzz --help` to see additional fuzzer options.

Convenience functions and macros

Warning: These utilties are excluded from semantic versioning and may be removed in future versions of test-fuzz.

`dont_care!`

The dont_care! macro can be used to implement serde::Serialize/serde::Deserialize for types that are easy to construct and whose values you do not care to record. Intuitively, dont_care!($ty, $expr) says:

Skip values of type $ty when serializing.
Initialize values of type $ty with $expr when deserializing.

More specifically, dont_care!($ty, $expr) expands to the following:

impl serde::Serialize for $ty {
    fn serialize<S>(&self, serializer: S) -> std::result::Result<S::Ok, S::Error>
    where
        S: serde::Serializer,
    {
        ().serialize(serializer)
    }
}

impl<'de> serde::Deserialize<'de> for $ty {
    fn deserialize<D>(deserializer: D) -> std::result::Result<Self, D::Error>
    where
        D: serde::Deserializer<'de>,
    {
        <()>::deserialize(deserializer).map(|_| $expr)
    }
}

If $ty is a unit struct, then $expr can be omitted. That is, dont_care!($ty) is equivalent to dont_care!($ty, $ty).

`leak!`

The leak! macro can help to serialize target arguments that are references and whose types implement the ToOwned trait. It is meant to be used with the convert option.

Specifically, an invocation of the following form declares a type LeakedX, and implements the From and test_fuzz::Into traits for it:

leak!(X, LeakedX);

One can then use LeakedX with the convert option as follows:

#[test_fuzz::test_fuzz(convert = "&X, LeakedX")

An example where X is Path appears in conversion.rs in this repository.

More generally, an invocation of the form leak!($ty, $ident) expands to the following:

#[derive(Clone, std::fmt::Debug, serde::Deserialize, serde::Serialize)]
struct $ident(<$ty as ToOwned>::Owned);

impl From<&$ty> for $ident {
    fn from(ty: &$ty) -> Self {
        Self(ty.to_owned())
    }
}

impl test_fuzz::Into<&$ty> for $ident {
    fn into(self) -> &'static $ty {
        Box::leak(Box::new(self.0))
    }
}

`serialize_ref` / `deserialize_ref`

serialize_ref and deserialize_ref function similar to leak!, but they are meant to be used wth Serde's serialize_with and deserialize_with field attributes (respectively).

fn serialize_ref<S, T>(x: &&T, serializer: S) -> Result<S::Ok, S::Error>
where
    S: serde::Serializer,
    T: serde::Serialize,
{
    <T as serde::Serialize>::serialize(*x, serializer)
}

fn deserialize_ref<'de, D, T>(deserializer: D) -> Result<&'static T, D::Error>
where
    D: serde::Deserializer<'de>,
    T: serde::de::DeserializeOwned + std::fmt::Debug,
{
    let x = <T as serde::de::Deserialize>::deserialize(deserializer)?;
    Ok(Box::leak(Box::new(x)))
}

`serialize_ref_mut` / `deserialize_ref_mut`

serialize_ref_mut and deserialize_ref_mut are similar to serialize_ref and deserialize_ref (respectively), expect they operate on mutable references instead of immutable ones.

`test-fuzz` package features

The features in this section apply to the test-fuzz package as a whole. Enable them in test-fuzz's dependency specification as described in the The Cargo Book. For example, to enable the cast_checks feature, use:

test-fuzz = { version = "*", features = ["cast_checks"] }

The test-fuzz package currently supports the following features:

`cast_checks`

Use cast_checks to automatically check target functions for invalid casts.

Note that this feature enables cast_checks only for functions annotated with the test_fuzz macro, not for the functions they call.

Serde formats

test-fuzz can serialize target arguments in multiple Serde formats. The following are the features used to select a format.

serde_bincode - Bincode (default)
serde_postcard - Postcard

Auto-generated corpus files

cargo-test-fuzz can auto-generate values for types that implement certain traits. If all of a target's argument types implement such traits, cargo-test-fuzz can auto-generate corpus files for the target.

The traits that cargo-test-fuzz currently supports and the values generated for them are as follows:

Trait(s)	Value(s)
`Bounded`	`T::min_value()`, `T::max_value()`
`Bounded + Add + One`	`T::min_value() + T::one()`
`Bounded + Add + Div + Two`	`T::min_value() / T::two() + T::max_value() / T::two()`
`Bounded + Add + Div + Two + One`	`T::min_value() / T::two() + T::max_value() / T::two() + T::one()`
`Bounded + Sub + One`	`T::max_value() - T::one()`
`Default`	`T::default()`

Key

Add - core::ops::Add
Bounded - num_traits::bounds::Bounded
Default - std::default::Default
Div - core::ops::Div
One - num_traits::One
Sub - core::ops::Sub
Two - test_fuzz::runtime::traits::Two (essentially Add + One)

Environment variables

`TEST_FUZZ_LOG`

During macro expansion:

If TEST_FUZZ_LOG is set to 1, write all instrumented fuzz targets and module definitions to standard output.
If TEST_FUZZ_LOG is set to a crate name, write that crate's instrumented fuzz targets and module definitions to standard output.

This can be useful for debugging.

`TEST_FUZZ_MANIFEST_PATH`

When running a target from outside its package directory, find the package's Cargo.toml file at this location. One may need to set this environment variable when enable_in_production is used.

`TEST_FUZZ_WRITE`

Generate corpus files when not running tests for those targets for which enable_in_production is set.

Limitations

Clonable arguments

A target's arguments must implement the Clone trait. The reason for this requirement is that the arguments are needed in two places: in a test-fuzz-internal function that writes corpus files, and in the body of the target function. To resolve this conflict, the arguments are cloned before being passed to the former.

Serializable / deserializable arguments

In general, a target's arguments must implement the serde::Serialize and serde::Deserialize traits, e.g., by deriving them. We say "in general" because test-fuzz knows how to handle certain special cases that wouldn't normally be serializable/deserializable. For example, an argument of type &str is converted to String when serializing, and back to a &str when deserializing. See also generic_args and impl_generic_args above.

Global variables

The fuzzing harnesses that test-fuzz implements do not initialize global variables. While execute_with provides some remedy, it is not a complete solution. In general, fuzzing a function that relies on global variables requires ad-hoc methods.

`convert` and `generic_args` / `impl_generic_args`

These options are incompatible in the following sense. If a fuzz target's argument type is a type parameter, convert will try to match the type parameter, not the type to which the parameter is set. Supporting the latter would seem to require simulating type substitution as the compiler would perform it. However, this is not currently implemented.

Tips and tricks

#[cfg(test)] is not enabled for integration tests. If your target is tested only by integration tests, then consider using enable_in_production and TEST_FUZZ_WRITE to generate a corpus. (Note the warning accompanying enable_in_production, however.)
If you know the package in which your target resides, passing -p <package> to cargo test/cargo test-fuzz can significantly reduce build times. Similarly, if you know your target is called from only one integration test, passing --test <name> can reduce build times.
Rust won't allow you to implement serde::Serialize for other repositories' types. But you may be able to patch other repositories to make their types serializable. Also, cargo-clone can be useful for grabbing dependencies' repositories.
Serde attributes can be helpful in implementing serde::Serialize/serde::Deserialize for difficult types.

Semantic versioning policy

We reserve the right to change the format of corpora, crashes, hangs, and work queues, and to consider such changes non-breaking.

License

test-fuzz is licensed and distributed under the AGPLv3 license with the Macros and Inline Functions Exception. In plain language, using the test_fuzz macro, the test_fuzz_impl macro, or test-fuzz's convenience functions and macros in your software does not require it to be covered by the AGPLv3 license.

Name		Name	Last commit message	Last commit date
Latest commit History 931 Commits
.github		.github
cargo-test-fuzz		cargo-test-fuzz
docs		docs
examples		examples
internal		internal
macro		macro
runtime		runtime
scripts		scripts
test-fuzz		test-fuzz
testing		testing
third-party		third-party
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
CODEOWNERS		CODEOWNERS
CONTRIBUTING.md		CONTRIBUTING.md
Cargo.toml		Cargo.toml
LICENSE		LICENSE
README.md		README.md
clippy.toml		clippy.toml
dylint.toml		dylint.toml
rustfmt.toml		rustfmt.toml

License

trailofbits/test-fuzz

Folders and files

Latest commit

History

Repository files navigation

test-fuzz

Installation

Overview

Components

test_fuzz macro

Arguments

bounds = "where_predicates"

generic_args = "parameters"

impl_generic_args = "parameters"

convert = "X, Y"

enable_in_production

execute_with = "function"

no_auto_generate

only_generic_args

rename = "name"

Serde field attributes on function arguments

test_fuzz_impl macro

cargo test-fuzz command

Usage

Convenience functions and macros

dont_care!

leak!

serialize_ref / deserialize_ref

serialize_ref_mut / deserialize_ref_mut

test-fuzz package features

cast_checks

Serde formats

Auto-generated corpus files

Environment variables

TEST_FUZZ_LOG

TEST_FUZZ_MANIFEST_PATH

TEST_FUZZ_WRITE

Limitations

Clonable arguments

Serializable / deserializable arguments

Global variables

convert and generic_args / impl_generic_args

Tips and tricks

Semantic versioning policy

License

About

Resources

License

Security policy

Stars

Watchers

Forks

Releases 32

Contributors 6

Languages

`test_fuzz` macro

`bounds = "where_predicates"`

`generic_args = "parameters"`

`impl_generic_args = "parameters"`

`convert = "X, Y"`

`enable_in_production`

`execute_with = "function"`

`no_auto_generate`

`only_generic_args`

`rename = "name"`

`test_fuzz_impl` macro

`cargo test-fuzz` command

`dont_care!`

`leak!`

`serialize_ref` / `deserialize_ref`

`serialize_ref_mut` / `deserialize_ref_mut`

`test-fuzz` package features

`cast_checks`

`TEST_FUZZ_LOG`

`TEST_FUZZ_MANIFEST_PATH`

`TEST_FUZZ_WRITE`

`convert` and `generic_args` / `impl_generic_args`