Add step

uppsala-makerspace · Dec 23, 2024 · b600db1 · b600db1
1 parent 3906ef5
commit b600db1
Show file tree

Hide file tree

Showing 3 changed files with 40 additions and 1 deletion.
diff --git a/docs/steps/11_transfer_vinyl_to_t_shirt.md → docs/steps/11_peel_vinyl.md b/docs/steps/11_transfer_vinyl_to_t_shirt.md → docs/steps/11_peel_vinyl.md
diff --git a/docs/steps/12_transfer_vinyl_to_t_shirt.md b/docs/steps/12_transfer_vinyl_to_t_shirt.md
@@ -0,0 +1,38 @@
+---
+tags:
+  - transfer
+  - t-shirt
+  - vinyl
+---
+
+# 11. Transfer vinyl to T-shirt
+
+Put the remainder of the foil on the T-shirt,
+with the colorful side up.
+
+Heat up the heat press, this takes about 15 minutes.
+
+Place the T-shirt under the press,
+with the foil at the desired location on the t-shirt.
+
+???- question "How to determine if the press is warmed up?"
+
+    ![Press not yet ready](press_not_yet_ready.jpg)
+
+    > Press not yet ready. It should say `T=160/160C`.
+    > A temperature from
+    > 155 to 165 degrees Celcius would also be fine.
+
+When the heat press is warmed up,
+lower the press. After the time you've set up in an earlier step,
+the press will start to beep. Raise the press again.
+
+Wait for the print to cool off.
+
+Carefully peel off the transparent layer from the shirt.
+
+Done!
+
+???- question "How does this look like?"
+
+    ![T-shirts that are done](t_shirts_done.jpg)
diff --git a/mkdocs.yml b/mkdocs.yml
@@ -17,7 +17,8 @@ nav:
     - 8. Set up Inkcut connection: steps/8_setup_inkcut_connection.md
     - 9. Use Inkcut: steps/9_use_inkcut.md
     - 10. Setup heat press: steps/10_setup_heat_press.md
-    - 11. Transfer vinyl to t-shirt: steps/11_transfer_vinyl_to_t_shirt.md
+    - 11. Peel the vinyl: steps/11_peel_vinyl.md
+    - 12. Transfer vinyl to t-shirt: steps/12_transfer_vinyl_to_t_shirt.md
   - Misc:
     - Code of conduct: CODE_OF_CONDUCT.md
     - Contributing: CONTRIBUTING.md