Assembly Playground

ARM v8 Assembly Programs which is tested on Raspberry Pi 3 B+ running Ubuntu 18 aarch64

Install

For Compiling and running you would require to have the following steps done and installed in your rpi or your system

• libc6:armhf
• libstdc++6:armhf
• gcc-arm-linux-gnueabihf
• binutils-arm-linux-gnu/ binutils-arm-linux-gnueabihf

Steps to Install

1. sudo dpkg --add-architecture armhf
2. sudo apt update
3. sudo apt install libc6:armhf
4. sudo apt install libstdc++6:armhf
5. sudo apt install binutils-arm-linux-gnueabihf
6. sudo apt install gcc-arm-linux-gnueabihf

Testing

For testing if everything is done correctly easiest way is using the makefile in this repo Steps

1. make file_name=first

$ make file_name=first
$ arm-linux-gnueabihf-as -o first.o first.s
$ arm-linux-gnueabihf-gcc -o ile_name first.o

2. ./first ; echo $?

$ ./first ; echo $?
$ 2

It should print Register value ie. 2 in this case

You can use this Makefile to compile any assembly program, you do not require to specify the extension(.s) when using the make command

make file_name=$name_of_the_file then run the executable

make clean will remove the compiled compiled files