This is an OPENCORE 0.6.6 install for MacOS Big Sur 11.2 .
It only boot for MacOS Big Sur , Windows would be crash .
Switch boot drive from BIOS .
Basic | Spec Sheet | Details |
---|---|---|
CPU | Intel i7-7700HQ | |
GPU | HD630 | |
RAM | DDR4 2400Mhz 8GB * 2 | |
Chipset | Intel HM175 | |
Audio | Realtek ALC898 | |
Ethernet | Atheros AR8175 | |
Display | 15.6" 1920x1080 (eDP) | |
WiFi | Broadcom DW1820A/BCM94350ZAE | |
Drive 1 | Samsung 860 EVO 500GB 2.5" SSD | MacOS boot drive |
Drive 2 | Adata SU800 256GB M.2 SSD | Windows boot drive |
dGPU | GeForce® GTX 1050 with 2GB GDDR5 | MacOS not work |
Replace the built-in intel Wifi Card to Broadcom DW1820A/BCM94350ZAE .
MacOS boot drive
Windows boot drive
The section below adapted from @0ranko0P's MSI-GL62M 7RD Hackintosh.
Some options only available in advanced mode:
In BIOS, hold Shift ( Right ) + Ctrl ( Right ) + Alt ( Left ) together then press F2
Settings | |
---|---|
CFG Lock |
Disable |
CSM |
Disable |
Fast Boot | Disable |
Intel Speed Shift (aka. HWP) |
Enable |
Secure Boot | Disable |
Enable Hiberation | Disable |
DVMT Pre-Allocated | 64M |
[Advanced] tab ├─ Power & Performance │ └─ CPU-Power Management Control │ ├─ Intel(R) Speed Shift Technology │ └─ CPU Lock Configuration │ └─ CFG Lock ├─ System Agent (SA) Configuration │ └─ Graphics Configuration │ └─ DVMT Pre-Allocated ├─ CSM Configuration │ └─ CSM Support │ └─ ACPI Settings └─ Enable Hibernation
After install MacOS
You need to manually add Platforminfo with OpenCore Configurator
- Serial Number
- UUID
- MLB
- ROM