engines/io_uring_cmd: do not send data buffer for write zeroes

For write zeroes commands, do not send a data bufffer address. If we do
send an address, the driver will try to carry out DMA mapping and
encounter driver mdts limitations which do not apply to write zeroes
commands. This lets us send large write zeroes commands to deallocate
the device with the deac=1.

This is only done for the non-vectored IO case. For the vectored IO
case, the driver requires data buffer addresses to be sent.

Signed-off-by: Vincent Fu <vincent.fu@samsung.com>

engines/nvme.c

@@ -406,7 +406,11 @@ int fio_nvme_uring_cmd_prep(struct nvme_uring_cmd *cmd, struct io_u *io_u,
 		cmd->addr = (__u64)(uintptr_t)iov;
 		cmd->data_len = 1;
 	} else {
-		cmd->addr = (__u64)(uintptr_t)io_u->xfer_buf;
+		/* no buffer for write zeroes */
+		if (cmd->opcode != nvme_cmd_write_zeroes)
+			cmd->addr = (__u64)(uintptr_t)io_u->xfer_buf;
+		else
+			cmd->addr = (__u64)NULL;
 		cmd->data_len = io_u->xfer_buflen;
 	}
 	if (data->lba_shift && data->ms) {