Skip to content
This repository has been archived by the owner on Jan 30, 2019. It is now read-only.
/ arduino-sht Public archive

Unofficial repository for Sensirion Humidity and temperature sensor support on Arduino

Notifications You must be signed in to change notification settings

winkj/arduino-sht

Repository files navigation

Important: this repository is deprecated - use https://github.com/Sensirion/arduino-sht instead!

arduino-sht

Unofficial repository for Sensirion Humidity and temperature sensor support on Arduino

Supported sensors:

  • SHTC1 (and SHTW1/SHTW2, using the SHTC1 driver)
  • SHT3x-DIS (I2C)
  • SHT3x-ARP (ratiometric analog voltage output)

Installation

Download arduino-sht either via git or from the releases page and place it in the Arduino/libraries directory. After restarting the Arduino IDE, you will get menu items under libraries and examples.

Integrating it into your sketch (Example for SHTC1)

Assuming you installed the library as described above, the following steps are necessary:

  1. Import the Wire library like this: From the menu bar, select Sketch > Import Library > Wire
  2. Import the arduino-sht library like this: From the menu bar, select Sketch > Import Library > arduino-sht
  3. Create an instance of the SHTC1 class
  4. In setup(), make sure to init the Wire library with Wire.init()
  5. If you want to use the serial console, remember to initialize the Serial library with Serial.begin(9600)
  6. Call shtc1.readSample() in the loop() function, which reads a temperature & humidity sample from the sensor
  7. Use shtc1.getHumidity() and shtc1.getTemperature() to get the values form the last sample

Important: getHumidity() and getTemperature() do not read a new sample from the sensor, but return the values read last. To read a new sample, make sure to call readSample()

Sample code

#include <Wire.h>

#include <shtc1.h>

SHTC1 shtc1;

void setup() {
  // put your setup code here, to run once:
  Wire.begin();  
  Serial.begin(9600);
}

void loop() {
  // put your main code here, to run repeatedly:
  shtc1.readSample();
  Serial.print("SHTC1:\n");
  Serial.print("  RH: ");
  Serial.print(shtc1.getHumidity(), 2);
  Serial.print("\n");
  Serial.print("  T:  ");
  Serial.print(shtc1.getTemperature(), 2);
  Serial.print("\n");

  delay(1000);
}

About

Unofficial repository for Sensirion Humidity and temperature sensor support on Arduino

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages