Add wolfSSL esp-tls and Certificate Bundle Support, improve esp32_mp RSA

wolfcrypt/src/include.am

@@ -123,6 +123,12 @@ EXTRA_DIST += wolfcrypt/src/port/ti/ti-aes.c \
               wolfcrypt/src/port/Espressif/esp_sdk_mem_lib.c \
               wolfcrypt/src/port/Espressif/esp_sdk_time_lib.c \
               wolfcrypt/src/port/Espressif/esp_sdk_wifi_lib.c \
+              wolfcrypt/src/port/Espressif/esp_crt_bundle/README.md \
+              wolfcrypt/src/port/Espressif/esp_crt_bundle/cacrt_all.pem \
+              wolfcrypt/src/port/Espressif/esp_crt_bundle/cacrt_deprecated.pem \
+              wolfcrypt/src/port/Espressif/esp_crt_bundle/esp_crt_bundle.c \
+              wolfcrypt/src/port/Espressif/esp_crt_bundle/gen_crt_bundle.py \
+              wolfcrypt/src/port/Espressif/esp_crt_bundle/cacrt_local.pem \
               wolfcrypt/src/port/Espressif/README.md \
               wolfcrypt/src/port/arm/cryptoCell.c \
               wolfcrypt/src/port/arm/cryptoCellHash.c \

wolfcrypt/src/port/Espressif/README.md

@@ -12,7 +12,7 @@ Support for the ESP32 on-board cryptographic hardware acceleration for symmetric
 
 ## ESP32 Acceleration
 
-More details about ESP32 HW Accelerationcan be found in:
+More details about ESP32 HW Acceleration can be found in:
 
 * [ESP32 Technical Reference Manual](https://espressif.com/sites/default/files/documentation/esp32_technical_reference_manual_en.pdf)
 * [ESP32-S2 Technical Reference Manual](https://www.espressif.com/sites/default/files/documentation/esp32-s2_technical_reference_manual_en.pdf)

wolfcrypt/src/port/Espressif/esp_crt_bundle/README.md

@@ -0,0 +1,287 @@
+# wolfSSL Support for ESP-IDF Certificate Bundles
+
+These files are typically only used when integrating wolfSSL with the ESP-IDF
+and with the intention of using Certificate Bundles in the esp-tls component.
+
+See the ESP-IDF `idf.py menuconfig`. A recent version of the [wolfSSL Kconfig](https://github.com/wolfSSL/wolfssl/blob/master/IDE/Espressif/ESP-IDF/examples/template/components/wolfssl/Kconfig)
+file is needed. The [template example](https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples/template)
+can be use for creating a project-specific [wolfSSL component](https://github.com/wolfSSL/wolfssl/tree/master/IDE/Espressif/ESP-IDF/examples/template/components/wolfssl)
+when not using a [Managed Component](https://components.espressif.com/components/wolfssl/wolfssl).
+
+## Getting Started
+
+Use the `idf.py menuconfig`,
+
+When in doubt, delete the `./build` directory. This is particularly important when changing Certificate Bundle PEM files.
+
+## Certificate Inspection
+
+The certificates in the bundle are in PEM format. The [gen_crt_bundle.py script](./gen_crt_bundle.py)
+converts them to DER format to load into the `x509_crt_imported_bundle_wolfssl_bin_start` binary
+array.
+
+To convert a PEM to DER from command-line:
+
+```
+MY_CERT_NAME=ISRG_ROOT_X1
+openssl x509 -outform der -in "$MY_CERT_NAME".pem -out "$MY_CERT_NAME".der
+```
+
+To inspect a DER file:
+
+```
+openssl x509 -inform der -in "$MY_CERT_NAME".der -text -noout
+```
+
+
+## Known Problems and Issues
+
+Here are the areas that may need attention. Most are related to older published versions of the ESP-IDF
+that may not yet have wolfSSL integration. An updated ESP-IDF is required to use wolfSSL component _in_ the ESP-IDF.
+There's a [gojimmypi V5.2.2 WIP Branch](https://github.com/gojimmypi/esp-idf/tree/my_522/components/lwip) for reference
+until a PR is created for upstream support.
+
+### Time
+
+The wolfSSL libraries are by default considerably more robust and strict. As such, it is important to have an accurate
+time and date setting for the certficate date ranges.. The wolfssL libraries include some
+[time helper functions](https://github.com/wolfSSL/wolfssl/blob/master/wolfssl/wolfcrypt/port/Espressif/esp-sdk-lib.h).
+These can be enabled with `#define USE_WOLFSSL_ESP_SDK_TIME` in the `user_settings.h`.
+
+Alternatively, the `WOLFSSL_DEBUG_IGNORE_ASN_TIME` can be used to ignore the time. This is strongly discouraged in anything
+other than a development / test environment where the time is known to be incorrect.
+
+### Examples may need to have wolfSSL Certificate Bundles enabled.
+
+In cases where [some examples are gated out](https://github.com/espressif/esp-idf/blob/c9df77efbf871d4c3ae9fb828778ff8c4ab36804/examples/protocols/esp_http_client/main/esp_http_client_example.c#L419),
+the "or" needs to be added for `CONFIG_WOLFSSL_CERTIFICATE_BUNDLE` option like this:
+
+```
+#if CONFIG_MBEDTLS_CERTIFICATE_BUNDLE || CONFIG_WOLFSSL_CERTIFICATE_BUNDLE
+```
+
+### Adding Embedded Certificates
+
+The `main` app directory has a [CMakeLists.txt](https://github.com/espressif/esp-idf/blob/6e5414b6c4f265a0adfb56a15fbfbe6beb1f8373/examples/protocols/esp_http_client/main/CMakeLists.txt#L10)
+with the `idf_component_register` function:
+
+```
+idf_component_register(SRCS "esp_http_client_example.c"
+                      INCLUDE_DIRS "."
+                      REQUIRES ${requires}
+                      EMBED_TXTFILES howsmyssl_com_root_cert.pem
+                                     postman_root_cert.pem)
+```
+
+This data ends up in the [extern const char](https://github.com/espressif/esp-idf/blob/6e5414b6c4f265a0adfb56a15fbfbe6beb1f8373/examples/protocols/esp_http_client/main/esp_http_client_example.c#L45)
+arrays:
+
+```
+extern const char howsmyssl_com_root_cert_pem_start[] asm("_binary_howsmyssl_com_root_cert_pem_start");
+extern const char howsmyssl_com_root_cert_pem_end[]   asm("_binary_howsmyssl_com_root_cert_pem_end");
+
+extern const char postman_root_cert_pem_start[] asm("_binary_postman_root_cert_pem_start");
+extern const char postman_root_cert_pem_end[]   asm("_binary_postman_root_cert_pem_end");
+```
+
+When changing the source files (also located in the `main` directory) - it is usually best to
+delete the `./build` directory to ensure fresh contents get parsed in as desired.
+
+VS Code / PlatformIO users can consider deleting the `./pio` and `./vscode` directories.
+
+Visual Studio/VisualGDB users can remove the `./vs` and `.visualgdb`.
+
+### TLS 1.3 issues with howsmyssl.com
+
+Espressif is using the well known https://www.howsmyssl.com/ in the
+[examples](https://github.com/espressif/esp-idf/tree/master/examples/protocols/), for instance in
+the [esp_http_client](https://github.com/espressif/esp-idf/tree/master/examples/protocols/esp_http_client).
+
+It was recently observed that TLS 1.3 is _not_ currently configured properly on that web site.
+See [howsmyssl #716](https://github.com/jmhodges/howsmyssl/issues/716).
+
+As such, when configuring wolfSSL for _only_ TLS 1.3, a `fatal error -313` may occur.
+
+Additionally, not that there's a [cert in the app](https://github.com/espressif/esp-idf/blob/c9df77efbf871d4c3ae9fb828778ff8c4ab36804/examples/protocols/esp_http_client/main/esp_http_client_example.c#L45)
+in `howsmyssl_com_root_cert_pem_start`, separate from the bundle certificate data. Take note of this when
+attempting to simply change `www.howsmyssl.com` to `www.google.com`.
+
+
+### postman
+
+Beware there's a hard-coded PEM certificate for the [postman root cert](https://github.com/espressif/esp-idf/blob/c9df77efbf871d4c3ae9fb828778ff8c4ab36804/examples/protocols/esp_http_client/main/esp_http_client_example.c#L48)
+(not in the bundle). If you see a failure, the data may need to be updated.
+
+See the comments for adding certificate data, copied here for reference:
+
+>Root cert for howsmyssl.com, taken from howsmyssl_com_root_cert.pem
+
+>The PEM file was extracted from the output of this command:
+   openssl s_client -showcerts -connect www.howsmyssl.com:443 </dev/null
+
+>The CA root cert is the last cert given in the chain of certs.
+
+>To embed it in the app binary, the PEM file is named
+   in the component.mk COMPONENT_EMBED_TXTFILES variable.
+
+## Timeout
+
+Occasionally there may be connection timeouts. This is not specific to wolfSSL. The root cause is likely CDN related.
+
+See the `.timeout_ms` and make adjustments as necessary in the `esp_http_client_config_t`:.
+
+```
+    esp_http_client_config_t config = {
+        .url = "https://postman-echo.com/post",
+        .event_handler = _http_event_handler,
+        .cert_pem = postman_root_cert_pem_start,
+        .is_async = true,
+        .timeout_ms = 5000,
+    };
+```
+
+## Failed to load CA
+
+This is expected to be a common error to encounter:
+
+```
+E (28454) esp_crt_bundle-wolfssl: Failed to load CA
+W (28454) esp_crt_bundle-wolfssl: Warning: found a matching cert, but not added to the Certificate Manager. error: 0
+E (28454) esp_crt_bundle-wolfssl: Did not find a matching crt
+E (28464) internal.c: ssl != NULL; no callback, verifyFail = 1
+W (28474) internal.c: CleanupStoreCtxCallback
+E (28474) internal.c: DoCertFatalAlert = -188
+E (28484) esp-tls-wolfssl: wolfSSL_connect returned -1, error code: -188
+E (28484) esp-tls-wolfssl: Failed to verify peer certificate , returned 24
+E (28494) esp-tls: Failed to open new connection
+E (28504) transport_base: Failed to open a new connection
+E (28514) HTTP_CLIENT: Connection failed, sock < 0
+E (28514) HTTP_CLIENT: HTTP request failed: ESP_ERR_HTTP_CONNECT
+```
+
+The problem here is that the example [esp_http_client](https://github.com/espressif/esp-idf/tree/master/examples/protocols/esp_http_client)
+app _does not work_ immediately out of the box unless changes are made to the source:
+
+```
+#ifdef CONFIG_ESP_TLS_USING_WOLFSSL
+    #include <wolfssl/wolfcrypt/settings.h>
+    #include <wolfssl/wolfcrypt/port/Espressif/esp-sdk-lib.h>
+
+    /* TODO: conditional bundle */
+    #include <wolfssl/wolfcrypt/port/Espressif/esp_crt_bundle.h>
+#endif
+```
+
+` openssl s_client -connect postman-echo.com:443 -CAfile ./postman.pem`
+
+### Component esp-wolfssl needs to be installed
+
+The wrong ESP-IDF toolchain is being used. Use the [gojimmypi my_522 branch](https://github.com/gojimmypi/esp-idf/tree/my_522).
+
+```
+-- Component esp-wolfssl needs to be installed. See api-reference/protocols/esp_tls docs.
+CMake Error at /mnt/c/SysGCC/esp32/esp-idf/v5.2/tools/cmake/component.cmake:382 (message):
+  Component esp-wolfssl not found
+Call Stack (most recent call first):
+  /mnt/c/SysGCC/esp32/esp-idf/v5.2/components/esp-tls/CMakeLists.txt:26 (idf_component_get_property)
+
+
+-- Configuring incomplete, errors occurred!
+```
+
+## x509_crt_bundle_wolfssl.S not found
+
+It is important to note that PlatformIO components can NOT be used for esp-tls.
+
+The wolfSSL library MUST be used from either the local project `components` or from the ESP-IDF.
+
+```
+*** [.pio\bld_8mb_dbg_wolfssl\.pio\bld_8mb_dbg_wolfssl\x509_crt_bundle_wolfssl.S.o]
+Source `.pio\bld_8mb_dbg_wolfssl\x509_crt_bundle_wolfssl.S' not found,
+needed by target `.pio\bld_8mb_dbg_wolfssl\.pio\bld_8mb_dbg_wolfssl\x509_crt_bundle_wolfssl.S.o'.
+```
+
+
+## Error couldn't get hostname for not.existent.url
+
+This error is as desired, showing that a bad URL will fail.
+
+```
+E (50613) esp-tls: couldn't get hostname for :not.existent.url: getaddrinfo() returns 202, addrinfo=0x0
+E (50613) esp-tls: Failed to open new connection
+E (50613) transport_base: Failed to open a new connection
+E (50623) HTTP_CLIENT: Connection failed, sock < 0
+E (50623) HTTP_CLIENT: Error perform http request ESP_ERR_HTTP_CONNECT
+```
+
+## Tool doesn't match supported version from list
+
+Edit the `C:\Users\%USER%\.platformio\packages\framework-espidf\tools\tools.json` and replace
+`13.2.0_20230928` with the desired version, such as `esp-13.2.0_20240530`.
+
+```
+  Tool doesn't match supported version from list ['esp-13.2.0_20230928']:
+  C:/Users/gojimmypi/.platformio/packages/toolchain-xtensa-esp-elf/bin/xtensa-esp32-elf-gcc.exe
+```
+
+## ESP_ERROR_CHECK failed: esp_err_t 0xffffffff (ESP_FAIL) at 0x400d3b60
+
+This is a generic `ESP_ERROR_CHECK` result, in this case the default WiFi SSID and password could not connect:
+
+
+```
+I (25970) example_connect: Wi-Fi disconnected, trying to reconnect...
+I (28380) example_connect: WiFi Connect failed 7 times, stop reconnect.
+ESP_ERROR_CHECK failed: esp_err_t 0xffffffff (ESP_FAIL) at 0x400d3b60
+file: "main/esp_http_client_example.c" line 936
+func: app_main
+expression: example_connect()
+
+abort() was called at PC 0x400890e3 on core 0
+```
+
+## Manual Testing
+
+To test if the `howsmyssl` web site has TLS 1.3 working, use the [wolfSSL client example](https://github.com/wolfSSL/wolfssl/tree/master/examples/client):
+
+```bash
+./examples/client/client -v 4 -h www.howsmyssl.com -p 443 -g -j
+```
+
+Or OpenSSL:
+
+```bash
+openssl s_client -connect www.howsmyssl.com:443 -tls1_3 -ciphersuites 'TLS_AES_256_GCM_SHA384'
+```
+
+Returns this unintuitive error:
+
+```text
+$ openssl s_client -connect www.howsmyssl.com:443 -tls1_3 -ciphersuites 'TLS_AES_256_GCM_SHA384'
+CONNECTED(00000003)
+4007DA6C617F0000:error:0A000410:SSL routines:ssl3_read_bytes:sslv3 alert handshake failure:../ssl/record/rec_layer_s3.c:1584:SSL alert number 40
+---
+no peer certificate available
+---
+No client certificate CA names sent
+---
+SSL handshake has read 7 bytes and written 247 bytes
+Verification: OK
+---
+New, (NONE), Cipher is (NONE)
+Secure Renegotiation IS NOT supported
+Compression: NONE
+Expansion: NONE
+No ALPN negotiated
+Early data was not sent
+Verify return code: 0 (ok)
+---
+```
+
+
+
+Or OpenSSL,
+
+```bash
+openssl s_client -tls1_3 -host www.howsmyssl.com -port 443
+```