This guide provides instructions on how to install the XOneFi firmware on a TP-Link Archer C7 V5 router.
- A TP-Link Archer C7 V5 router.
-
Download the Sysupgrade Firmware:
-
Log in to your OpenWRT router:
- Access your router via a web browser at
http://192.168.1.1(default IP). - Enter your username and password.
- Access your router via a web browser at
-
Navigate to the Firmware Upgrade section:
- Go to
System>Backup / Flash Firmware.
- Go to
-
Upload the Sysupgrade Firmware:
- Under
Flash new firmware image, clickChoose Fileand select the downloaded.binfile. - Uncheck the box labeled
Keep settingsto ensure a clean installation. - Click
Flash Image, thenProceedto start the upgrade process.
- Under
-
Wait for the upgrade to complete:
- The router will reboot automatically. Do not power off the router during this process.
- Reconnect to the router and log in.
-
Download the Factory Firmware:
-
Access the Router's Web Interface:
- Connect your router to your computer using an Ethernet cable.
- Access the router’s web interface by entering
http://tplinkwifi.netorhttp://192.168.0.1in your browser. - Log in with the default credentials (usually
admin/admin).
-
Upload the Factory Firmware:
- Go to
Advanced>System Tools>Firmware Upgrade. - Click
Browse, select the downloaded.binfile, and clickUpgrade. - Confirm the operation and wait for the flashing process to complete.
- Go to
-
Router Reboot:
- The router will reboot. Wait until it is fully operational.
- Reconnect to the router using the default IP (usually
192.168.1.1).
- Navigate to the configuration page ie 192.168.1.1/xonefi/configure.html
- Enter your configuration settings
If you encounter any issues or need further assistance, please create an issue on this GitHub repository.