pyAussieBB

This is a very simple module for interacting with the Aussie Broadband APIs.

Usage

pip install --user pyaussiebb
python
>>> from aussiebb import AussieBB
>>> account = AussieBB(username, password)
>>> account.get_services()
[{allyourservicedetails}]

For more, check out the docs.

AsyncIO version

You can replace from aussiebb import AussieBB with from aussiebb.asyncio import AussieBB and you'll get an aiohttp-powered version. The only difference in this case is that you have to explicitly call login() for reasons.

If you hit the rate limit it'll raise a RateLimit exception. I haven't put that functionality into the blocking version yet, since ... that tends not to hit it. 🤣

Development

Example service tests I've seen

All the "endpoints" below should be tacked onto aussiebb.const.BASEURL['api'].

Warning: /nbn/{service_id}/connection seems to have both a GET and POST method endpoint - tests on other endpoints may be similar.

These can be run by using AussieBB.run_test() with the string after the last forward-slash as the "test" - ie, connection or linestate.

HFC

These are entirely untested so far.

Endpoint	Method	Name	Description
/nbn/{service_id}/connection	Probably GET	Check Connection	Check to see if your service is currently connected
/nbn/{service_id}/connection	Probably POST	Kick Connection	Kick your current session and force your device to reauthenticate
/tests/{service_id}/loopback	Probably POST	Loopback Test	This will test the connectivity between the point NBN’s network transitions to ours and to the closest point to your property. Usually either the Network Termination Device or Node.
/tests/{service_id}/ntdstatus	Probably POST	NTD Status	An NTD Status will show you the operational state of the Network Termination Device (NTD). The test will also show if the NTD is detecting the wired connection from your router.

FTTC

Endpoint	Method	Name	Description
/nbn/{service_id}/connection	GET	Check Connection	Check to see if your service is currently connected
/nbn/{service_id}/connection	Probably POST	Kick Connection	Kick your current session and force your device to reauthenticate
/tests/{service_id}/dpuportreset	Probably POST	DPU Port Reset	Reset the Port on the DPU (Distribution Point Unit) along with clearing any errors that maybe causing issues with connectivity.
/tests/{service_id}/dpuportstatus	POST	DPU Port Status	A DPU (Distribution Point Unit) port status will show if the NCD (Network Connection Device) is providing power to the DPU. It will also state if the NCD (Network Connection Device) is in sync.
/tests/{service_id}/dpustatus	POST	DPU Status	This will provide if the DPU (Distribution Point Unit) is currently being powered.
/tests/{service_id}/loopback	POST	Loopback Test	This will test the connectivity between the point NBN’s network transitions to ours and to the closest point to your property. Usually either the Network Termination Device or Node.
/tests/{service_id}/ncdportreset	Probably POST	NCD Port Reset	Reset the gateway port on your NCD (Network Connection Device).
/tests/{service_id}/ncdreset	Probably POST	NCD Reset	This will remotely restart your Network Termination Device.

FTTN

Endpoint	Method	Name	Description
/nbn/{service_id}/connection	GET	Check Connection	Check to see if your service is currently connected
/nbn/{service_id}/connection	Probably POST	Kick Connection	Kick your current session and force your device to reauthenticate
/tests/{service_id}/linestate	POST	Line State	A line state test will determine if you have “sync” (connection) to the node. If the service is in sync this test will also return your maximum and current attainable transfer rate.
/tests/{service_id}/loopback	POST	Loopback Test	This will test the connectivity between the point NBN’s network transitions to ours and to the closest point to your property. Usually either the Network Termination Device or Node.
/tests/{service_id}/portreset	Probably POST	Port Reset	This will reset the connection from the Node and also clear errors that may be causing issues with gaining sync.
/tests/{service_id}/stabilityprofile	Probably POST	Stability Profile	This will apply changes to your FTTN service including allowing increased noise to occur before making the connection unstable. This will cause your speeds to degrade as a result, but in turn making the service more stable. For NBN to investigate a fault this profile needs to be applied and a minimum of 5 dropouts recorded over a 24hr period on NBN's systems before a dropout fault can be raised

FTTP

These are as-yet untested.

Endpoint	Method	Name	Description
/nbn/{service_id}/connection	Probably GET	Check Connection	Check to see if your service is currently connected
/nbn/{service_id}/connection	Probably POST	Kick Connection	Kick your current session and force your device to reauthenticate
/tests/{service_id}/loopback	Probably POST	Loopback Test	This will test the connectivity between the point NBN’s network transitions to ours and to the closest point to your property. Usually either the Network Termination Device or Node.
/tests/{service_id}/portreset	Probably POST	Port Reset	This will reset the connection from the Node and also clear errors that may be causing issues with gaining sync.
/tests/{service_id}/unidstatus	Probably POST	UNI-D Status	UNI-D Status will show if the UNI-D port you are currently using has a router connected to it. This will also provide the Link speed your router and UNI-D port are connected at Eg, 100mbit or 1gbit. You will also see the MAC address of the currently connected router.

Changelog

See CHANGELOG.md