Add Satisfaction75 to QMK, Enable EEPROM on stm32f072 (#5094)

* Add stm32f072 base ck4x4 to handwired

* add prints

* Save these tries

* Save changes again

* Working hadron oled

* OLEd working but ws2812b still iffy:

* save another try

* Encoder feature + OLED

* RTC code

* Implement clock setting mode

* Whitespace

* Encoder hooked up to working LED PWM code

* Add missing files

* eeprom changes

* Save changes

* Move i2c master

* Move satisfaction75 under cannonkeys

* Set proper default folder

* Revert some core changes

* Undo paved iris changes

* Reorganize code for maintainability and prep for new features

* Add starting code for clock OLED mode

* Clock set mode finished

* Add custom encoder modes

* Actually add VIA keymap

* Gate to only 072

* fix gate for only 072

* Update header guards and includes

* Update i2c selection strategy

* Update board.c to handle software reset to DFU

.gitignore

@@ -1,3 +1,4 @@
+.history/
 .dep
 *.o
 *.bin

drivers/qwiic/micro_oled.c

@@ -28,6 +28,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "micro_oled.h"
+#include <print.h>
 #include <stdlib.h>
 #include "util/font5x7.h"
 #include "util/font8x16.h"
@@ -309,12 +310,11 @@ static uint8_t micro_oled_screen_buffer[] = {
 #else
 //catchall for custom screen szies
     static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = {0};
-#endif  
+#endif
 
 
 
 void micro_oled_init(void) {
-
   i2c_init();
   i2c_start(I2C_ADDRESS_SA0_1);
 

keyboards/cannonkeys/satisfaction75/boards/ST_STM32F072B_DISCOVERY/board.c

@@ -0,0 +1,111 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#if STM32_HAS_GPIOA
+  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
+#endif
+#if STM32_HAS_GPIOB
+  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
+#endif
+#if STM32_HAS_GPIOC
+  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
+#endif
+#if STM32_HAS_GPIOD
+  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
+#endif
+#if STM32_HAS_GPIOE
+  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
+#endif
+#if STM32_HAS_GPIOF
+  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
+#endif
+#if STM32_HAS_GPIOG
+  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
+   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
+#endif
+#if STM32_HAS_GPIOH
+  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
+   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
+#endif
+#if STM32_HAS_GPIOI
+  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
+   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
+#endif
+};
+#endif
+
+void enter_bootloader_mode_if_requested(void);
+
+/**
+ * @brief   Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ *          and before any other initialization.
+ */
+void __early_init(void) {
+  enter_bootloader_mode_if_requested();
+  stm32_clock_init();
+}
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief   MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif
+
+/**
+ * @brief   Board-specific initialization code.
+ * @todo    Add your board-specific code, if any.
+ */
+void boardInit(void) {
+  SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP;
+  SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP);
+}