Skip to content

Official Implementation for Unrolled-DOT: an unrolled network for solving (time-of-flight) diffuse optical tomography inverse problems.

Notifications You must be signed in to change notification settings

yyiz/Unrolled-DOT

Repository files navigation

Unrolled-DOT: An Interpretable Deep Network for Diffuse Optical Tomography

Official Implementation for Unrolled-DOT: an unrolled network for solving (time-of-flight) diffuse optical tomography inverse problems.

Yongyi Zhao, Ankit Raghuram, Fay Wang, Hyun Keol Kim, Andreas Hielscher, Jacob Robinson, and Ashok Veeraraghavan.

Setting Up

git clone https://github.com/yyiz/unrolled_DOT_code.git
cd unrolled_DOT_code

Requirements

Before running the Unrolled-DOT package, please install the following:

  • Python 3.6+
  • MATLAB R2019b+
  • Jupyter Lab
  • Pytorch v1.9+
  • Numpy v1.19+
  • Matplotlib v3.3+
  • Kornia v0.5.11
  • parse
  • scipy
  • scikit-image
  • h5py
  • export_fig
  • subaxis

Dataset

The simulated datasets can be generated by running our code (see below). The real-world dataset is available at DOI. The dataset consists of 5000 time-of-flight diffuse optical tomography measurements and their associated ground truth images, which were obtained from the MATLAB digits dataset. For more details please refer to our paper.

The files needed to run the code are:

  • 5_29_21_src-det_10x10_scene_4cm/
  • allTrainingDat_30-Sep-2021.mat

Training (and running test code)

Pre-processing

  1. In the file unrolled_DOT_code/setpaths/paths.txt, set the four paths: libpath, datpath, resultpath, basepath. For example:
libpath = /path/to/libpath
datpath = /path/to/datpath
resultpath = /path/to/resultpath
basepath = /path/to/basepath
  1. Place the datafiles in the following directories:

    • 5_29_21_src-det_10x10_scene_4cm/: to be placed in datpath
    • allTrainingDat_30-Sep-2021.mat: to be placed in datpath
  2. Move the matlab packages export_fig and subaxis to the libpath path

Training on our simulated dataset

  1. The files referred to in this section can be found in the basepath/fig4-5_recon_sim directory.
  2. Run the RUNME_sim_unrolled_DOT.ipynb with four configurations: unet_vgg_train_fashion_test_fashion.ini, train_fashion_test_fashion.ini, train_fashion_test_mnist.ini, train_mnist_test_mnist.ini, referring to training/testing the model on the fashion-MNIST dataset with a U-Net and VGG-loss, training/testing on the fashion-MNIST, training on the fashion-MNIST dataset and testing on MNIST, training/testing on the MNIST dataset without a U-Net and VGG-loss.
    • Re-run the script with each configuration, set the parameters by modifying the configname variable to the corresponding .ini
  3. Run the visReconSim.m script to visualize the reconstructed test images with the trained model
  4. The scripts for training the models found in the circular phantom reconstruction and simulated number-of-layers test can be found in circ_RUNME_sim_unrolled_DOT.ipynb and test_nlayers_sim.ipynb, respectively.

Training on our real-world dataset

  1. The files referred to in this section can be found in the basepath/fig12_recon_exp directory.
  2. Perform temporal filtering: in the RUNME_gen_fig.m file, run the code up to and including section 1.
  3. Perform the training using the unrolled-DOT_exp_train.ipynb script. This file can be called using the RUNME_gen_fig.m script (section 2) or directly run in a Jupyter notebook. The latter is better for monitoring training progress.
    • unrolled-DOT_exp_train.ipynb reads a set of configuration file that sets the training parameters. The file is determined by setting the configname variable to the desired file (a str) located in the fig12_recon_exp/settings directory. tof_EML_dot_train_settings.ini and trains the network without the refinement U-Net and VGG-loss while exp_vgg_unet.ini trains the model with these components.
  4. Continue running sections 3-5 of RUNME_gen_fig.m

Additional notes:

  • Small differences with the results in the paper may occur due to non-deterministic behavior of the Pytorch-cuda training. However, these differences should be negligible.
  • Labels are not included in the runtime vs MSE plot since these were labeled in latex to ensure updated references. Correct labels can be found by matching indices with the label_arr variable.

Running the performance analysis

  1. To run this code, make sure you have generated the temporal-filtered data from section 1 of the real-world dataset training section. The files referred to in this section can be found in the basepath/fig10_performance_analysis directory.
  2. Run the performance_analysis_train.ipynb script.

Generating additional output plots

After performing the steps above, the code for the other experiments in our paper can be run. Go into the folder for the desired experiment (in the basepath directory) and execute the associated matlab script.

Acknowledgements

This repository drew inspiration/help from the following resources:

Refinement U-Net and VGG-Loss are based on example from FlatNet:

Citation

If you found our code or paper useful in your project, please cite:

@article{Zhao2023,
   author = {Yongyi Zhao and Ankit Raghuram and Fay Wang and Stephen Hyunkeol Kim and Andreas H. Hielscher and Jacob T. Robinson and Ashok Veeraraghavan},
   title = {{Unrolled-DOT: an interpretable deep network for diffuse optical tomography}},
   volume = {28},
   journal = {Journal of Biomedical Optics},
   number = {3},
   publisher = {SPIE},
   pages = {036002},
   year = {2023},
   doi = {10.1117/1.JBO.28.3.036002},
   URL = {https://doi.org/10.1117/1.JBO.28.3.036002}
}

Contact

If you have further questions, please email Yongyi Zhao at yongyi@rice.edu

About

Official Implementation for Unrolled-DOT: an unrolled network for solving (time-of-flight) diffuse optical tomography inverse problems.

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published