Skip to content
This repository has been archived by the owner on Jul 2, 2023. It is now read-only.

Supported Devices

zebscripts edited this page Jan 28, 2022 · 2 revisions

Theoretically, anything that supports adb and is capable of running the latest AFK Arena game version with a resolution of 1080x1920 should be supported. We do, however, recommend using Bluestacks as it's our emulator of choice to test the script on. It's impossible for us to test the script on every other platform, which means at least Bluestacks will most likely always work.

Here's a list of devices where the script has been successfully run at least once:


  1. Display:
    • Change the resolution to 1080x1920 (Portrait) or 1920x1080 (Landscape)
    • Optional: Change from Landscape (Tablet mode) to Portrait (Phone mode)
    • Recommended: Use 240 DPI (shouldn't affect the script, but you never know)
  2. Device Settings:
    • Recommended: Samsung Galaxy S8 Plus
  3. Advanced:
    • Enable Android Debug Bridge (ADB)

  1. Display:
    • Change the resolution to 1080x1920 (Portrait) or 1920x1080 (Landscape)
    • Optional: Change from Landscape (Tablet mode) to Portrait (Phone mode)

Nox is most likely broken again, we do not recommend using it.

  1. Settings: Under Nox settings, make sure to make the following changes:
    1. General:
      • Enable Root
    2. Performance:
      • Change the resolution to 1080x1920 (Portrait) or 1920x1080 (Landscape)
      • Optional: Mobile Phone (instead of Tablet)
  2. USB Debugging: Visit this link on how to enable USB Debugging. It's in the beginning, under the Phone Setup part. The settings on Nox are inside a folder called Tools.

Personal Android device

  1. USB Debugging: Visit this link on how to enable USB Debugging. It's in the beginning, under the Phone Setup part. The settings on Nox are inside a folder called Tools.
  2. Resolution: Make sure your Device is set to 1080x1920.
  3. Root: Unfortunately root is necessary. If you don't have root access, please use an emulator (Bluestacks).
  4. BusyBox: This will install one specific command that the script uses for pixel analysis.
Clone this wiki locally