everywhere: reindent .overlay files with tabs

`checkpatch.pl` requires that dts sources are indented with tabs, fix all the spaces that slipped in while checkpatch wasn't watching. Signed-off-by: Jordan Yates <jordan@embeint.com>
zephyrproject-rtos · Jun 26, 2024 · 243eb36 · 243eb36
1 parent 4fefde2
commit 243eb36
Show file tree

Hide file tree

Showing 175 changed files with 775 additions and 776 deletions.
diff --git a/boards/arduino/portenta_h7/arduino_portenta_h7_stm32h747xx_m7_1_0_0.overlay b/boards/arduino/portenta_h7/arduino_portenta_h7_stm32h747xx_m7_1_0_0.overlay
@@ -5,5 +5,5 @@
  */
 
 &clk_lsi {
-    status = "okay";
+	status = "okay";
 };
diff --git a/boards/arduino/portenta_h7/arduino_portenta_h7_stm32h747xx_m7_4_10_0.overlay b/boards/arduino/portenta_h7/arduino_portenta_h7_stm32h747xx_m7_4_10_0.overlay
@@ -5,6 +5,6 @@
  */
 
 &clk_lse {
-    clock-frequency = <32768>;
-    status = "okay";
+	clock-frequency = <32768>;
+	status = "okay";
 };
diff --git a/boards/renesas/da1469x_dk_pro/dts/da1469x_dk_pro_lcdc.overlay b/boards/renesas/da1469x_dk_pro/dts/da1469x_dk_pro_lcdc.overlay
@@ -8,74 +8,74 @@
  #include <zephyr/dt-bindings/display/panel.h>
 
 / {
-    chosen {
-        zephyr,display = &lcdc;
-    };
+	chosen {
+		zephyr,display = &lcdc;
+	};
 
-    lvgl_pointer {
-        input = <&display_touch>;
-        status = "okay";
-        swap-xy;
-    };
+	lvgl_pointer {
+		input = <&display_touch>;
+		status = "okay";
+		swap-xy;
+	};
 };
 
 &pinctrl {
-    i2c2_default: i2c2_default {
-        group1 {
-            pinmux = <SMARTBOND_PINMUX(I2C2_SDA, 0, 19)>,
-                <SMARTBOND_PINMUX(I2C2_SCL, 0, 18)>;
-            bias-pull-up;
-        };
-    };
+	i2c2_default: i2c2_default {
+		group1 {
+			pinmux = <SMARTBOND_PINMUX(I2C2_SDA, 0, 19)>,
+				 <SMARTBOND_PINMUX(I2C2_SCL, 0, 18)>;
+			bias-pull-up;
+		};
+	};
 
-    i2c2_sleep: i2c2_sleep {
-        group1 {
-            pinmux = <SMARTBOND_PINMUX(GPIO, 0, 19)>,
-                <SMARTBOND_PINMUX(GPIO, 0, 18)>;
-            bias-pull-up;
-        };
-    };
+	i2c2_sleep: i2c2_sleep {
+		group1 {
+			pinmux = <SMARTBOND_PINMUX(GPIO, 0, 19)>,
+				 <SMARTBOND_PINMUX(GPIO, 0, 18)>;
+			bias-pull-up;
+		};
+	};
 };
 
 &i2c2 {
-    clock-frequency = <400000>;
-    status = "okay";
+	clock-frequency = <400000>;
+	status = "okay";
 
-    display_touch: ft6206@38 {
-        compatible = "focaltech,ft5336";
-        status = "okay";
-        reg = <0x38>;
-        int-gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
-    };
+	display_touch: ft6206@38 {
+		compatible = "focaltech,ft5336";
+		status = "okay";
+		reg = <0x38>;
+		int-gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &lcdc {
-    status = "okay";
-    pinctrl-0 = <&display_controller_default>;
-    pinctrl-1 = <&display_controller_sleep>;
-    pinctrl-names = "default", "sleep";
-    width = <480>;
-    height = <272>;
-    disp-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
-    pixel-format = <PANEL_PIXEL_FORMAT_RGB_565>;
+	status = "okay";
+	pinctrl-0 = <&display_controller_default>;
+	pinctrl-1 = <&display_controller_sleep>;
+	pinctrl-names = "default", "sleep";
+	width = <480>;
+	height = <272>;
+	disp-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+	pixel-format = <PANEL_PIXEL_FORMAT_RGB_565>;
 
-    /*
-     * Panel settings for the NHD-4.3-480272EF-ASXP-CTP
-     * display panel model which integrates the SC7283
-     * driver IC.
-     */
-    display-timings {
-        compatible = "zephyr,panel-timing";
-        hsync-len = <2>;
-        hfront-porch = <2>;
-        hback-porch = <3>;
-        vsync-len = <2>;
-        vfront-porch = <2>;
-        vback-porch = <2>;
-        hsync-active = <0>;
-        vsync-active = <0>;
-        de-active = <1>;
-        pixelclk-active = <1>;
-        clock-frequency = <12000000>;
-      };
+	/*
+	 * Panel settings for the NHD-4.3-480272EF-ASXP-CTP
+	 * display panel model which integrates the SC7283
+	 * driver IC.
+	 */
+	display-timings {
+		compatible = "zephyr,panel-timing";
+		hsync-len = <2>;
+		hfront-porch = <2>;
+		hback-porch = <3>;
+		vsync-len = <2>;
+		vfront-porch = <2>;
+		vback-porch = <2>;
+		hsync-active = <0>;
+		vsync-active = <0>;
+		de-active = <1>;
+		pixelclk-active = <1>;
+		clock-frequency = <12000000>;
+	};
 };
diff --git a/boards/renesas/da1469x_dk_pro/dts/da1469x_dk_pro_mipi_dbi.overlay b/boards/renesas/da1469x_dk_pro/dts/da1469x_dk_pro_mipi_dbi.overlay
@@ -8,50 +8,50 @@
  #include <zephyr/dt-bindings/gpio/gpio.h>
 
 / {
-    chosen {
-        zephyr,display = &ili9340;
-    };
+	chosen {
+		zephyr,display = &ili9340;
+	};
 
-    lvgl_pointer {
-        input = <&display_touch>;
-        status = "okay";
-        swap-xy;
-        invert-x;
-        invert-y;
-    };
+	lvgl_pointer {
+		input = <&display_touch>;
+		status = "okay";
+		swap-xy;
+		invert-x;
+		invert-y;
+	};
 };
 
 &i2c2 {
-    clock-frequency = <400000>;
-    status = "okay";
+	clock-frequency = <400000>;
+	status = "okay";
 
-    display_touch: ft6206@38 {
-        compatible = "focaltech,ft5336";
-        status = "okay";
-        reg = <0x38>;
-        int-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-    };
+	display_touch: ft6206@38 {
+		compatible = "focaltech,ft5336";
+		status = "okay";
+		reg = <0x38>;
+		int-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &lcdc {
-    compatible = "renesas,smartbond-mipi-dbi";
-    status = "okay";
-    reset-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-    pinctrl-0 = <&mipi_dbi_default>;
-    pinctrl-1 = <&mipi_dbi_read>;
-    pinctrl-2 = <&mipi_dbi_sleep>;
-    pinctrl-names = "default", "read", "sleep";
-    #address-cells = <1>;
-    #size-cells = <0>;
+	compatible = "renesas,smartbond-mipi-dbi";
+	status = "okay";
+	reset-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&mipi_dbi_default>;
+	pinctrl-1 = <&mipi_dbi_read>;
+	pinctrl-2 = <&mipi_dbi_sleep>;
+	pinctrl-names = "default", "read", "sleep";
+	#address-cells = <1>;
+	#size-cells = <0>;
 
-    ili9340: ili9340@0 {
-        compatible = "ilitek,ili9340";
-        mipi-max-frequency = <48000000>;
-        status = "okay";
-        reg = <0>;
-        width = <240>;
-        height = <320>;
-        pixel-format = <ILI9XXX_PIXEL_FORMAT_RGB565>;
-        rotation = <0>;
-    };
+	ili9340: ili9340@0 {
+		compatible = "ilitek,ili9340";
+		mipi-max-frequency = <48000000>;
+		status = "okay";
+		reg = <0>;
+		width = <240>;
+		height = <320>;
+		pixel-format = <ILI9XXX_PIXEL_FORMAT_RGB565>;
+		rotation = <0>;
+	};
 };
diff --git a/boards/renesas/da1469x_dk_pro/dts/da1469x_dk_pro_psram.overlay b/boards/renesas/da1469x_dk_pro/dts/da1469x_dk_pro_psram.overlay
@@ -4,7 +4,7 @@
  * SPDX-License-Identifier: Apache-2.0
  */
 
- / {
+/ {
 	aliases {
 		sram-ext = &memc;
 	};

diff --git a/boards/shields/adafruit_data_logger/adafruit_data_logger.overlay b/boards/shields/adafruit_data_logger/adafruit_data_logger.overlay
@@ -12,17 +12,17 @@
 	leds {
 		compatible = "gpio-leds";
 		/*
-		* LED1 connection must be manually established using a jumper between
-                * pins "L1" and "Digital I/O 3".
-		*/
+		 * LED1 connection must be manually established using a jumper between
+		 * pins "L1" and "Digital I/O 3".
+		 */
 		green_led_adafruit_data_logger: led_1__adafruit_data_logger {
 			gpios = <&arduino_header 9 GPIO_ACTIVE_HIGH>; /* D3 */
 			label = "User LED1";
 		};
 		/*
-		* LED2 connection must be manually established using a jumper between
-                * pins "L2" and "Digital I/O 4".
-		*/
+		 * LED2 connection must be manually established using a jumper between
+		 * pins "L2" and "Digital I/O 4".
+		 */
 		red_led_adafruit_data_logger: led_2_adafruit_data_logger {
 			gpios = <&arduino_header 10 GPIO_ACTIVE_HIGH>; /* D4 */
 			label = "User LED2";
@@ -57,9 +57,9 @@
 		alarms-count = <1>;
 		battery-switch-over = "standard";
 		/*
-		* Interrupt connection must be manually established using a jumper wire between
-                * pins "SQ" and "Digital I/O 7".
-		*/
+		 * Interrupt connection must be manually established using a jumper wire between
+		 * pins "SQ" and "Digital I/O 7".
+		 */
 		int1-gpios = <&arduino_header 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* D7 */
 		status = "okay";
 	};

diff --git a/boards/shields/esp_8266/boards/numaker_pfm_m467.overlay b/boards/shields/esp_8266/boards/numaker_pfm_m467.overlay
@@ -5,14 +5,14 @@
  */
 
 &pinctrl {
-    uart2_esp8266: uart2_esp8266 {
-	group0 {
-		pinmux = <PC1MFP_UART2_TXD>,
-			 <PC0MFP_UART2_RXD>,
-			 <PC3MFP_UART2_nRTS>,
-			 <PC2MFP_UART2_nCTS>;
+	uart2_esp8266: uart2_esp8266 {
+		group0 {
+			pinmux = <PC1MFP_UART2_TXD>,
+				 <PC0MFP_UART2_RXD>,
+				 <PC3MFP_UART2_nRTS>,
+				 <PC2MFP_UART2_nCTS>;
+		};
 	};
-    };
 };
 
 &uart2 {
@@ -27,7 +27,7 @@
 		compatible = "espressif,esp-at";
 		reset-gpios = <&gpioc 4 GPIO_ACTIVE_LOW>;
 		status = "okay";
-    };
+	};
 };
 
 &gpioc {

diff --git a/boards/shields/nxp_btb44_ov5640/nxp_btb44_ov5640.overlay b/boards/shields/nxp_btb44_ov5640/nxp_btb44_ov5640.overlay
@@ -11,38 +11,38 @@
 };
 
 &nxp_cam_i2c {
-    status = "okay";
-
-    ov5640: ov5640@3c {
-        compatible = "ovti,ov5640";
-        reg = <0x3c>;
-        reset-gpios = <&nxp_cam_connector 9 GPIO_ACTIVE_LOW>;
-        powerdown-gpios = <&nxp_cam_connector 17 GPIO_ACTIVE_HIGH>;
-
-        port {
-            ov5640_ep_out: endpoint {
-                remote-endpoint = <&mipi_csi2rx_ep_in>;
-            };
-        };
-    };
+	status = "okay";
+
+	ov5640: ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		reset-gpios = <&nxp_cam_connector 9 GPIO_ACTIVE_LOW>;
+		powerdown-gpios = <&nxp_cam_connector 17 GPIO_ACTIVE_HIGH>;
+
+		port {
+			ov5640_ep_out: endpoint {
+				remote-endpoint = <&mipi_csi2rx_ep_in>;
+			};
+		};
+	};
 };
 
 &nxp_mipi_csi {
-    status = "okay";
+	status = "okay";
 
-    sensor = <&ov5640>;
+	sensor = <&ov5640>;
 
-    ports {
-        port@1 {
-            reg = <1>;
+	ports {
+		port@1 {
+			reg = <1>;
 
-            mipi_csi2rx_ep_in: endpoint {
-                remote-endpoint = <&ov5640_ep_out>;
-            };
-        };
-    };
+			mipi_csi2rx_ep_in: endpoint {
+				remote-endpoint = <&ov5640_ep_out>;
+			};
+		};
+	};
 };
 
 &nxp_csi {
-    status = "okay";
+	status = "okay";
 };
diff --git a/boards/shields/ssd1306/boards/reel_board.overlay b/boards/shields/ssd1306/boards/reel_board.overlay
@@ -1,3 +1,3 @@
 &arduino_i2c {
-        compatible = "nordic,nrf-twi";
+	compatible = "nordic,nrf-twi";
 };