shields: display: Add Waveshare Pico OLED 1.3

Added Waveshare 1.3inch OLED module for RaspberryPi Pico.

Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>

boards/shields/waveshare_pico_oled_1_3/Kconfig.defconfig

@@ -0,0 +1,27 @@
+# Copyright (c) 2023 TOKITA Hiroshi
+# SPDX-License-Identifier: Apache-2.0
+
+if SHIELD_WAVESHARE_PICO_OLED_1_3
+
+if DISPLAY
+
+if LVGL
+
+config LV_Z_VDB_SIZE
+	default 64
+
+config LV_DPI_DEF
+	default 110
+
+config LV_Z_BITS_PER_PIXEL
+	default 1
+
+choice LV_COLOR_DEPTH
+	default LV_COLOR_DEPTH_1
+endchoice
+
+endif # LVGL
+
+endif # DISPLAY
+
+endif # SHIELD_WAVESHARE_PICO_OLED_1_3

boards/shields/waveshare_pico_oled_1_3/Kconfig.shield

@@ -0,0 +1,8 @@
+# Copyright (c) 2023 TOKITA Hiroshi
+# SPDX-License-Identifier: Apache-2.0
+
+config SHIELD_WAVESHARE_PICO_OLED_1_3
+	def_bool $(shields_list_contains,waveshare_pico_oled_1_3)
+
+config SHIELD_WAVESHARE_PICO_OLED_1_3_KEYS
+	def_bool $(shields_list_contains,waveshare_pico_oled_1_3_keys)

boards/shields/waveshare_pico_oled_1_3/boards/rpi_pico.overlay

@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2023 TOKITA Hiroshi
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+&pinctrl {
+	i2c1_default: i2c1_default {
+		waveshare_pico_oled_1_3_group1 {
+			pinmux = <I2C1_SDA_P6>, <I2C1_SCL_P7>;
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <I2C_BITRATE_STANDARD>;
+	pinctrl-0 = <&i2c1_default>;
+	pinctrl-names = "default";
+};

boards/shields/waveshare_pico_oled_1_3/doc/index.rst

@@ -0,0 +1,113 @@
+.. _waveshare_pico_oled_1_3:
+
+Waveshare 1.3inch OLED Module for RaspberryPi Pico
+##################################################
+
+Overview
+********
+
+The Waveshare 1.3" OLED Module for the Raspberry Pi Pico is a 64x128
+vertically long LCD module based on the SinoWealth SH1107 controller.
+This module connects via I2C and optionally can use SPI(need soldering).
+This display module has two buttons that the user program can use.
+It is convenient for implementing user interfaces.
+
+More information about the shield and Arduino adapter can be found at
+the `Waveshare 1.3inch OLED Module for RaspberryPi Pico 64x128 website`_.
+
+Pin Assignments
+===============
+
++-------+-----------+-------------------------------------------+
+| Name  | Function  | Usage                                     |
++=======+===========+===========================================+
+| GP0   | None      |                                           |
++-------+-----------+-------------------------------------------+
+| GP1   | None      |                                           |
++-------+-----------+-------------------------------------------+
+| GP2   | None      |                                           |
++-------+-----------+-------------------------------------------+
+| GP3   | None      |                                           |
++-------+-----------+-------------------------------------------+
+| GP4   | None      |                                           |
++-------+-----------+-------------------------------------------+
+| GP5   | None      |                                           |
++-------+-----------+-------------------------------------------+
+| GP6   | I2C1_SDA  | I2C Data input                            |
++-------+-----------+-------------------------------------------+
+| GP7   | I2C1_SCL  | I2C Clock input                           |
++-------+-----------+-------------------------------------------+
+| GP8   | GPIO      | Data/Command control pin (Need soldering) |
++-------+-----------+-------------------------------------------+
+| GP9   | SPI1_CSN  | SPI Chip Select (Need soldering)          |
++-------+-----------+-------------------------------------------+
+| GP10  | SPI1_SCK  | SPI Clock input (Need soldering)          |
++-------+-----------+-------------------------------------------+
+| GP11  | SPI1_TX   | SPI Data input (Need soldering)           |
++-------+-----------+-------------------------------------------+
+| GP12  | RESET     |                                           |
++-------+-----------+-------------------------------------------+
+| GP13  | None      |                                           |
++-------+-----------+-------------------------------------------+
+| GP14  | None      |                                           |
++-------+-----------+-------------------------------------------+
+| GP15  | GPIO      | User Key 0                                |
++-------+-----------+-------------------------------------------+
+| GP16  | None      |                                           |
++-------+-----------+-------------------------------------------+
+| GP17  | GPIO      | User Key 1                                |
++-------+-----------+-------------------------------------------+
+| GP18  | None      |                                           |
++-------+-----------+-------------------------------------------+
+| GP19  | None      |                                           |
++-------+-----------+-------------------------------------------+
+| GP20  | None      |                                           |
++-------+-----------+-------------------------------------------+
+| GP21  | None      |                                           |
++-------+-----------+-------------------------------------------+
+| GP22  | None      |                                           |
++-------+-----------+-------------------------------------------+
+| GP23  | None      |                                           |
++-------+-----------+-------------------------------------------+
+| GP24  | None      |                                           |
++-------+-----------+-------------------------------------------+
+| GP25  | None      |                                           |
++-------+-----------+-------------------------------------------+
+| GP26  | None      |                                           |
++-------+-----------+-------------------------------------------+
+| GP27  | None      |                                           |
++-------+-----------+-------------------------------------------+
+| GP28  | None      |                                           |
++-------+-----------+-------------------------------------------+
+
+.. note::
+   The SPI interface is not available by default.
+   Switch the J1, J2, and J3 jumper by moving 0-ohm registers
+   to the SPI side to enable SPI.
+
+Programming
+***********
+
+Set ``-DSHIELD=waveshare_pico_oled_1_3`` when you invoke ``west build``. For example:
+
+.. zephyr-app-commands::
+   :zephyr-app: samples/subsys/display/lvgl
+   :board: rpi_pico
+   :shield: waveshare_pico_oled_1_3
+   :goals: build
+
+For using buttons, set ``-DSHIELD=waveshare_pico_oled_1_3_keys`` to enable it.
+
+.. zephyr-app-commands::
+   :zephyr-app: samples/basic/button
+   :board: rpi_pico
+   :shield: waveshare_pico_oled_1_3_keys
+   :goals: build
+
+References
+**********
+
+.. target-notes::
+
+.. _Waveshare 1.3inch OLED Module for RaspberryPi Pico 64x128 website:
+   https://www.waveshare.com/pico-oled-1.3.htm

boards/shields/waveshare_pico_oled_1_3/waveshare_pico_oled_1_3.overlay

@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2023 TOKITA Hiroshi
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include <zephyr/dt-bindings/input/input-event-codes.h>
+
+/ {
+        chosen {
+                zephyr,display = &waveshare_pico_oled_1_3;
+        };
+};
+
+&i2c1 {
+	waveshare_pico_oled_1_3: ssd1306@3c {
+		compatible = "sinowealth,sh1106";
+		status = "okay";
+		reg = <0x3c>;
+		width = <64>;
+		height = <128>;
+		segment-offset = <0>;
+		page-offset = <0>;
+		display-offset = <0x60>;
+		multiplex-ratio = <63>;
+		prechargep = <0x22>;
+		ready-time-ms = <0>;
+	};
+};

boards/shields/waveshare_pico_oled_1_3/waveshare_pico_oled_1_3_keys.overlay

@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2023 TOKITA Hiroshi
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include <zephyr/dt-bindings/input/input-event-codes.h>
+
+/ {
+	buttons {
+		compatible = "gpio-keys";
+		key0: key0 {
+			gpios = <&gpio0 15 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
+			label = "User Key 0";
+			zephyr,code = <INPUT_KEY_0>;
+		};
+		key1: key1 {
+			gpios = <&gpio0 17 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
+			label = "User Key 1";
+			zephyr,code = <INPUT_KEY_1>;
+		};
+	};
+
+	aliases {
+		sw0 = &key0;
+	};
+};