boards: arm: nucleo_h745zi_q

add fdcan1, fdcan2 and usb_fs DT configurations Signed-off-by: Alexander Kozhinov <ak.alexander.kozhinov@gmail.com>
zephyrproject-rtos · Nov 4, 2024 · 916213e · 916213e
1 parent e90c58a
commit 916213e
Show file tree

Hide file tree

Showing 3 changed files with 13 additions and 0 deletions.
diff --git a/boards/st/nucleo_h745zi_q/doc/index.rst b/boards/st/nucleo_h745zi_q/doc/index.rst
@@ -112,6 +112,8 @@ features:
 +-------------+------------+-------------------------------------+
 | SPI         | on-chip    | spi                                 |
 +-------------+------------+-------------------------------------+
+| FDCAN       | on-chip    | CAN-FD Control Area Network         |
++-------------+------------+-------------------------------------+
 
 Other hardware features are not yet supported on this Zephyr port.
 

diff --git a/boards/st/nucleo_h745zi_q/nucleo_h745zi_q_stm32h745xx_m7.dts b/boards/st/nucleo_h745zi_q/nucleo_h745zi_q_stm32h745xx_m7.dts
@@ -144,3 +144,13 @@ zephyr_udc0: &usbotg_fs {
 	pinctrl-names = "default";
 	status = "okay";
 };
+
+&fdcan1 {
+	pinctrl-0 = <&fdcan1_rx_pd0 &fdcan1_tx_pd1>;
+	/* HSE will be used by default. Uncomment below to enable APB1.2 120MHz clock */
+	/*clocks = <&rcc STM32_CLOCK_BUS_APB1_2 0x00000100>,
+	*	    <&rcc STM32_SRC_PLL1_Q FDCAN_SEL(1)>;
+	*/
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/boards/st/nucleo_h745zi_q/nucleo_h745zi_q_stm32h745xx_m7.yaml b/boards/st/nucleo_h745zi_q/nucleo_h745zi_q_stm32h745xx_m7.yaml
@@ -16,6 +16,7 @@ supported:
   - counter
   - i2c
   - pwm
+  - can
   - netif:eth
   - spi
   - usb_device