soc/arm/silabs: Kconfig: add SOC_GECKO_USE_RAIL kconfig option

Currently on zephyr, RAIL is used only for bluetooth. RAIL library is needed to use efr32 radio regardless of the protocol used. We add SOC_GECKO_USE_RAIL kconfig option to indicate if we use radio. FPU is needed when using RAIL, we configure it if SOC_GECKO_USE_RAIL is set. Signed-off-by: Antoine Bout <antoine.bout@silabs.com>
zephyrproject-rtos · Jul 31, 2023 · dbea999 · dbea999
1 parent 5555ac3
commit dbea999
Show file tree

Hide file tree

Showing 5 changed files with 29 additions and 0 deletions.
diff --git a/boards/arm/efr32_radio/Kconfig.defconfig b/boards/arm/efr32_radio/Kconfig.defconfig
@@ -29,6 +29,13 @@ config LOG_BACKEND_SWO_FREQ_HZ
 	default 875000
 	depends on LOG_BACKEND_SWO
 
+if SOC_GECKO_USE_RAIL
+
+config FPU
+	default y
+
+endif # SOC_GECKO_USE_RAIL
+
 if BT
 
 config FPU

diff --git a/boards/arm/efr32_thunderboard/Kconfig.defconfig b/boards/arm/efr32_thunderboard/Kconfig.defconfig
@@ -23,6 +23,13 @@ config CMU_HFXO_FREQ
 config CMU_LFXO_FREQ
 	default 32768
 
+if SOC_GECKO_USE_RAIL
+
+config FPU
+	default y
+
+endif # SOC_GECKO_USE_RAIL
+
 if BT
 
 config FPU

diff --git a/boards/arm/efr32xg24_dk2601b/Kconfig.defconfig b/boards/arm/efr32xg24_dk2601b/Kconfig.defconfig
@@ -18,6 +18,13 @@ config FLASH_BASE_ADDRESS
 	hex
 	default 0x08000000
 
+if SOC_GECKO_USE_RAIL
+
+config FPU
+	default y
+
+endif # SOC_GECKO_USE_RAIL
+
 if BT
 
 config FPU

diff --git a/drivers/bluetooth/hci/Kconfig b/drivers/bluetooth/hci/Kconfig
@@ -60,6 +60,7 @@ config BT_SILABS_HCI
 	bool "Silicon Labs Bluetooth interface"
 	depends on SOC_SERIES_EFR32BG22 || SOC_SERIES_EFR32MG24 || SOC_SERIES_EFR32BG27
 	depends on !PM || SOC_GECKO_PM_BACKEND_PMGR
+	select SOC_GECKO_USE_RAIL
 	select ENTROPY_GENERATOR
 	select MBEDTLS
 	select MBEDTLS_PSA_CRYPTO_C

diff --git a/soc/arm/silabs_exx32/Kconfig b/soc/arm/silabs_exx32/Kconfig
@@ -319,4 +319,11 @@ config SOC_GECKO_HAS_HFRCO_FREQRANGE
 	  If disabled, indicates that configuration of HFRCO frequency for corresponding SOC
 	  is not supported via this field. This is the case for e.g. efm32hg, efm32wg series.
 
+config SOC_GECKO_USE_RAIL
+	bool "Use RAIL (Radio Abstraction Interface Layer)"
+	help
+	  RAIL (Radio Abstraction Interface Layer) is a library needed to use the EFR radio
+	  hardware. This option enable the proper set of features to allow to properly compile
+	  with the RAIL blob.
+
 endif # SOC_FAMILY_EXX32