boards: Add support for the NXP MIMXRT595 DSP core #61356

dluke62 · 2023-08-10T00:00:17Z

Add board and soc files for the audio DSP in NXP MIMXRT595.

DerekSnell

Hi @dluke62 ,
Thank you for contributing this! Can you fix the compliance issues? I also have some quick feedback of the SOC series naming convention we need to change. I'm sure we will have more feedback to come. Thank you

soc/xtensa/nxp_adsp/Kconfig

soc/xtensa/nxp_adsp/imx8m/Kconfig.defconfig.series

dbaluta · 2023-08-10T11:23:34Z

Also, I guess you will need to add at least some compile time tests. @iuliana-prodan care to provide some guidance here on how did you do this for imx8m_adsp?

soc/xtensa/nxp_adsp/Kconfig

soc/xtensa/nxp_adsp/imx8/Kconfig.defconfig.series

soc/xtensa/nxp_adsp/imx8m/Kconfig.defconfig.series

iuliana-prodan · 2023-08-10T14:13:13Z

Also, I guess you will need to add at least some compile time tests. @iuliana-prodan care to provide some guidance here on how did you do this for imx8m_adsp?

You can have a simple compilation test by adding a yaml file in the boards folder for your target: see https://docs.zephyrproject.org/latest/develop/test/twister.html and an example: https://github.com/zephyrproject-rtos/zephyr/blob/main/boards/xtensa/nxp_adsp_imx8m/nxp_adsp_imx8m.yaml

dluke62 · 2023-08-10T17:48:30Z

@iuliana-prodan , @dbaluta if I understand correctly, we can't have any compile time tests because we can't compile for RT595 DSP without downloading Xtensa toolchain separately (unlike imx8, which has toolchain in Zephyr SDK). So the CI won't be able to compile Zephyr for RT595 DSP. Is that correct?

dleach02 · 2023-08-11T04:06:04Z

@stephanosio how would one submit an enablement to Zephyr upstream if there isn't an open toolchain in our CI?

dbaluta · 2023-08-11T07:37:46Z

@iuliana-prodan , @dbaluta if I understand correctly, we can't have any compile time tests because we can't compile for RT595 DSP without downloading Xtensa toolchain separately (unlike imx8, which has toolchain in Zephyr SDK). So the CI won't be able to compile Zephyr for RT595 DSP. Is that correct?

Technically, once you have the Xtensa toolchain configuration you can use that to create the corresponding open toolchain and integrate it in Zephyr SDK.

For example, here is how imx8 toolchain was added:

https://github.com/zephyrproject-rtos/sdk-ng/pull/187/commits

Another clean PR for adding a toolchain for a new board is here:

zephyrproject-rtos/sdk-ng#694

dluke62 · 2023-08-11T08:10:19Z

@iuliana-prodan , @dbaluta if I understand correctly, we can't have any compile time tests because we can't compile for RT595 DSP without downloading Xtensa toolchain separately (unlike imx8, which has toolchain in Zephyr SDK). So the CI won't be able to compile Zephyr for RT595 DSP. Is that correct?

Technically, once you have the Xtensa toolchain configuration you can use that to create the corresponding toolchain and integrate it in Zephyr SDK.

For example, here is how imx8 toolchain was added:

https://github.com/zephyrproject-rtos/sdk-ng/pull/187/commits

Another clean PR for adding a toolchain for a new board is here:

zephyrproject-rtos/sdk-ng#694

Thank you! As far as I understand the toolchain/core configuration is not freely available - one has to create an account with Cadence to get it. I don't know if we can simply check it in here - I'm assuming it comes with its own license, user agreement, etc. @DerekSnell could you please chime in?

dbaluta · 2023-08-11T08:32:40Z

Thank you! As far as I understand the toolchain/core configuration is not freely available - one has to create an account with Cadence to get it. I don't know if we can simply check it in here - I'm assuming it comes with its own license, user agreement, etc. @DerekSnell could you please chime in?

Toolchain is not freely available but you don't need that.

You just need the configuration files that are created by hardware integration team and I think Cadence understoond the value of making that configuration open.

So, for example here is the license of one of the headers in the configuration files:

zephyrproject-rtos/sdk-ng@e6d3435#diff-293f51bf819c4d20c9fc914c7c5b1be732cb1238523bd1702e68b3e1fa9aed14

If you can send me your toolchain archive I can try to make a PR to integrate the configuration in Zephyr SDK so that we can build an open toolchain.

Zephyr uses crosstool-ng to build the toolchain based on the configuration files you provide.

@dluke62 How do you actually compile the code now?

DerekSnell

Hi @dluke62 ,
Sorry, yesterday I requested these changes when I submitted my review before you pushed an update. But it appears GitHub did not capture them (probably my fault).

We need to change the naming of the SOC series. RT595 is the SOC derivative in the i.MX RT500 series, which in Zephyr is named RT5xx. NXP may offer other RT5xx part numbers in this series using the same F1 DSP core, which would share this code. So my changes keep the RT595 name when referencing the SOC, but use RT5xx when referencing the series.

Thanks again for your contribution!

boards/arm/mimxrt595_evk/doc/index.rst

DerekSnell · 2023-08-11T10:57:29Z

soc/xtensa/nxp_adsp/rt595/Kconfig.defconfig.series

@@ -0,0 +1,46 @@
+# Copyright (c) 2023 Google LLC.


This folder name rt595 should be changed to rt5xx for the SOC series using this F1 DSP core, to enable other RT500 part numbers using the same DSP core.

soc/xtensa/nxp_adsp/rt595/Kconfig.defconfig.series

soc/xtensa/nxp_adsp/rt595/Kconfig.soc

boards/xtensa/nxp_adsp_rt595/Kconfig.board

boards/xtensa/nxp_adsp_rt595/nxp_adsp_rt595_defconfig

soc/xtensa/nxp_adsp/CMakeLists.txt

soc/xtensa/nxp_adsp/rt595/Kconfig.series

dbaluta · 2023-08-16T12:17:48Z

@dluke62 some questions for you when you get back to this:

how do you load the code and start the FW?
what is your plan on building a toolchain configuration inside Zephyr SDK. My suggestion is to start with the configuration you have for your internal Xtensa build and open that up as described here xtensa: Add mt8195_adsp toolchain sdk-ng#694. Or just send me the configuration and will take care about this.

hakehuang · 2023-09-27T10:48:22Z

@hakehuang can you please try again.

#63095

is merged.

@dbaluta , you still need update the west.yml to direct to the right hal_nxp commit.

iuliana-prodan · 2023-09-27T10:53:07Z

@hakehuang can you please try again.
#63095
is merged.

@dbaluta , you still need update the west.yml to direct to the right hal_nxp commit.

@hakehuang the hal_nxp from west.yml has all the needed support for this PR. So, no changes there.
Can you please try to run CI on this PR?

@dluke62 can you rebase or amend this PR in order to trigger the Zephyr CI.

hakehuang · 2023-09-27T14:06:01Z

@hakehuang the hal_nxp from west.yml has all the needed support for this PR. So, no changes there.
Can you please try to run CI on this PR?

@iuliana-prodan in this case, you need rebase this PR, I try to rebase for you, but I just not get permission.

besides, as you do not use sysbuild to make M7 to boot rt595 core, I have no way to run your case, so I can only do build checking. can you double check the run at your side

marc-hb · 2023-09-27T14:15:05Z

I try to rebase for you, but I just not get permission.

Indeed you cannot change someone else's clone.

The way to solve this problem (for instance: when someone is out of office), is to fetch their branch (git fetch origin pull/61356/head) and submit a new PR. This preserves their name on the commit messages.

iuliana-prodan · 2023-09-27T14:25:07Z

I try to rebase for you, but I just not get permission.

Indeed you cannot change someone else's clone.

The way to solve this problem (for instance: when someone is out of office), is to fetch their branch (git fetch origin pull/61356) and submit a new PR. This preserves their name.

@hakehuang this is not my PR.
Let's wait a bit for @dluke62, maybe he can update this (/his) PR to trigger the CI.
All I can do is what @marc-hb suggested above, but I would like to wait for @dluke62 :)
I don't want to duplicate this PR.

dluke62 · 2023-09-27T15:54:38Z

I try to rebase for you, but I just not get permission.

Indeed you cannot change someone else's clone.
The way to solve this problem (for instance: when someone is out of office), is to fetch their branch (git fetch origin pull/61356) and submit a new PR. This preserves their name.

@hakehuang this is not my PR. Let's wait a bit for @dluke62, maybe he can update this (/his) PR to trigger the CI. All I can do is what @marc-hb suggested above, but I would like to wait for @dluke62 :) I don't want to duplicate this PR.

thank you guys! I am rebasing the PR, will update it soon.

In preparation for RT500 ADSP enablement, consolidate common Xtensa configuration parameters in top level Kconfig.defconfig. Signed-off-by: Dmitry Lukyantsev <dmitrylu@google.com>

very out of date review, apologies

hakehuang · 2023-09-28T08:44:39Z

a build warning:

-- Including generated dts.cmake file: /home/shared/disk/zephyr_project/zephyr_test/zephyr/samples/hello_world/build/zephyr/dts.cmake
/home/shared/disk/zephyr_project/zephyr_test/zephyr/samples/hello_world/build/zephyr/zephyr.dts:18.8-26.5: Warning (simple_bus_reg): /soc/cpus: missing or empty reg/ranges property
Parsing /home/shared/disk/zephyr_project/zephyr_test/zephyr/Kconfig

others are ok

scripts/twister -p nxp_adsp_rt595 -T tests/kernel/ --build-only
Renaming output directory to /home/shared/disk/zephyr_project/zephyr_test/zephyr/twister-out.1
INFO    - Using Ninja..
INFO    - Zephyr version: zephyr-v3.4.0-4456-ge936ecbb074d
INFO    - Using 'zephyr' toolchain.
INFO    - Building initial testsuite list...
INFO    - Writing JSON report /home/shared/disk/zephyr_project/zephyr_test/zephyr/twister-out/testplan.json
INFO    - JOBS: 16
INFO    - Adding tasks to the queue...
INFO    - Added initial list of jobs to queue
INFO    - Total complete:  177/ 177  100%  skipped:   90, failed:    0, error:    0
INFO    - 177 test scenarios (177 test instances) selected, 90 configurations skipped (59 by static filter, 31 at runtime).
INFO    - 87 of 177 test configurations passed (100.00%), 0 failed, 0 errored, 90 skipped with 0 warnings in 380.11 seconds
INFO    - 0 test configurations executed on platforms, 87 test configurations were only built.
INFO    - Saving reports...
INFO    - Writing JSON report /home/shared/disk/zephyr_project/zephyr_test/zephyr/twister-out/twister.json
INFO    - Writing xunit report /home/shared/disk/zephyr_project/zephyr_test/zephyr/twister-out/twister.xml...
INFO    - Writing xunit report /home/shared/disk/zephyr_project/zephyr_test/zephyr/twister-out/twister_report.xml...
INFO    - Run completed

LaurentiuM1234

A few nitpicks/suggestions

soc/xtensa/nxp_adsp/rt5xx/Kconfig.defconfig.series

soc/xtensa/nxp_adsp/Kconfig.defconfig

boards/xtensa/nxp_adsp_rt595/nxp_adsp_rt595_defconfig

dbaluta · 2023-10-03T08:07:16Z

@nashif I think we are ready to merge this. @LaurentiuM1234 we can fix the nitpicks in the future PRs.

dluke62 · 2023-10-05T23:35:26Z

a build warning:

-- Including generated dts.cmake file: /home/shared/disk/zephyr_project/zephyr_test/zephyr/samples/hello_world/build/zephyr/dts.cmake
/home/shared/disk/zephyr_project/zephyr_test/zephyr/samples/hello_world/build/zephyr/zephyr.dts:18.8-26.5: Warning (simple_bus_reg): /soc/cpus: missing or empty reg/ranges property
Parsing /home/shared/disk/zephyr_project/zephyr_test/zephyr/Kconfig

others are ok

scripts/twister -p nxp_adsp_rt595 -T tests/kernel/ --build-only
Renaming output directory to /home/shared/disk/zephyr_project/zephyr_test/zephyr/twister-out.1
INFO    - Using Ninja..
INFO    - Zephyr version: zephyr-v3.4.0-4456-ge936ecbb074d
INFO    - Using 'zephyr' toolchain.
INFO    - Building initial testsuite list...
INFO    - Writing JSON report /home/shared/disk/zephyr_project/zephyr_test/zephyr/twister-out/testplan.json
INFO    - JOBS: 16
INFO    - Adding tasks to the queue...
INFO    - Added initial list of jobs to queue
INFO    - Total complete:  177/ 177  100%  skipped:   90, failed:    0, error:    0
INFO    - 177 test scenarios (177 test instances) selected, 90 configurations skipped (59 by static filter, 31 at runtime).
INFO    - 87 of 177 test configurations passed (100.00%), 0 failed, 0 errored, 90 skipped with 0 warnings in 380.11 seconds
INFO    - 0 test configurations executed on platforms, 87 test configurations were only built.
INFO    - Saving reports...
INFO    - Writing JSON report /home/shared/disk/zephyr_project/zephyr_test/zephyr/twister-out/twister.json
INFO    - Writing xunit report /home/shared/disk/zephyr_project/zephyr_test/zephyr/twister-out/twister.xml...
INFO    - Writing xunit report /home/shared/disk/zephyr_project/zephyr_test/zephyr/twister-out/twister_report.xml...
INFO    - Run completed

Thank you, fixed the warning.

Add board and soc files for the NXP MIMXRT595 DSP core. Signed-off-by: Dmitry Lukyantsev <dmitrylu@google.com>

dluke62 · 2023-10-09T22:26:38Z

@nashif would you mind taking another look? CI is now green.

dluke62 · 2023-10-23T22:22:13Z

Hi @dbaluta! Do you know if there is a way to move forward with this PR? Are we blocked by Anas's change request?

dbaluta · 2023-10-24T06:47:33Z

@dluke62 I talked with @nashif on discord and he will pick this up once the 3.5 release is out. Will ping him again.

dluke62 · 2023-10-24T22:32:35Z

@dluke62 I talked with @nashif on discord and he will pick this up once the 3.5 release is out. Will ping him again.

thank you!!

outdated

dluke62 requested review from nashif, dcpleung and andyross as code owners August 10, 2023 00:00

zephyrbot added the platform: NXP NXP label Aug 10, 2023

zephyrbot requested review from danieldegrasse, dbaluta, decsny, DerekSnell, dleach02, EmilioCBen, iuliana-prodan, manuargue, mmahadevan108 and yvanderv August 10, 2023 00:00

zephyrbot assigned dleach02 Aug 10, 2023

DerekSnell requested changes Aug 10, 2023

View reviewed changes

dbaluta reviewed Aug 10, 2023

View reviewed changes

soc/xtensa/nxp_adsp/Kconfig Outdated Show resolved Hide resolved

dbaluta reviewed Aug 10, 2023

View reviewed changes

soc/xtensa/nxp_adsp/imx8m/Kconfig.defconfig.series Show resolved Hide resolved

iuliana-prodan requested changes Aug 10, 2023

View reviewed changes

soc/xtensa/nxp_adsp/Kconfig Outdated Show resolved Hide resolved

soc/xtensa/nxp_adsp/imx8/Kconfig.defconfig.series Show resolved Hide resolved

soc/xtensa/nxp_adsp/imx8m/Kconfig.defconfig.series Outdated Show resolved Hide resolved

dluke62 force-pushed the dluke62/nxp_rt595_adsp_board branch from 7fcc0f3 to e7079a1 Compare August 10, 2023 18:51

DerekSnell previously requested changes Aug 11, 2023

View reviewed changes

dluke62 force-pushed the dluke62/nxp_rt595_adsp_board branch from 414d0b5 to f681aae Compare August 18, 2023 00:21

soc: nxp_adsp: Refactor imx8/imx8m Kconfig

264638d

In preparation for RT500 ADSP enablement, consolidate common Xtensa configuration parameters in top level Kconfig.defconfig. Signed-off-by: Dmitry Lukyantsev <dmitrylu@google.com>

dluke62 force-pushed the dluke62/nxp_rt595_adsp_board branch from 7e8e1df to e936ecb Compare September 27, 2023 15:58

dbaluta previously approved these changes Sep 27, 2023

View reviewed changes

dluke62 requested a review from nashif September 27, 2023 17:54

iuliana-prodan previously approved these changes Sep 27, 2023

View reviewed changes

LaurentiuM1234 reviewed Sep 28, 2023

View reviewed changes

dluke62 dismissed stale reviews from iuliana-prodan and dbaluta via b3f4a75 October 5, 2023 23:33

dluke62 force-pushed the dluke62/nxp_rt595_adsp_board branch from e936ecb to b3f4a75 Compare October 5, 2023 23:33

boards: Add support for the NXP MIMXRT595 DSP core

e3815af

Add board and soc files for the NXP MIMXRT595 DSP core. Signed-off-by: Dmitry Lukyantsev <dmitrylu@google.com>

dluke62 force-pushed the dluke62/nxp_rt595_adsp_board branch from b3f4a75 to e3815af Compare October 5, 2023 23:41

dbaluta approved these changes Oct 6, 2023

View reviewed changes

iuliana-prodan approved these changes Oct 6, 2023

View reviewed changes

dleach02 approved these changes Oct 25, 2023

View reviewed changes

nashif merged commit 357d6ce into zephyrproject-rtos:main Oct 25, 2023
18 checks passed

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

boards: Add support for the NXP MIMXRT595 DSP core #61356

boards: Add support for the NXP MIMXRT595 DSP core #61356

dluke62 commented Aug 10, 2023

DerekSnell left a comment

dbaluta commented Aug 10, 2023

iuliana-prodan commented Aug 10, 2023

dluke62 commented Aug 10, 2023 •

edited

Loading

dleach02 commented Aug 11, 2023

dbaluta commented Aug 11, 2023 •

edited

Loading

dluke62 commented Aug 11, 2023

dbaluta commented Aug 11, 2023 •

edited

Loading

DerekSnell left a comment

DerekSnell Aug 11, 2023

dbaluta commented Aug 16, 2023

hakehuang commented Sep 27, 2023

iuliana-prodan commented Sep 27, 2023 •

edited

Loading

hakehuang commented Sep 27, 2023 •

edited

Loading

marc-hb commented Sep 27, 2023 •

edited

Loading

iuliana-prodan commented Sep 27, 2023

dluke62 commented Sep 27, 2023

hakehuang commented Sep 28, 2023 •

edited

Loading

LaurentiuM1234 left a comment

dbaluta commented Oct 3, 2023

dluke62 commented Oct 5, 2023

dluke62 commented Oct 9, 2023

dluke62 commented Oct 23, 2023

dbaluta commented Oct 24, 2023 •

edited

Loading

dluke62 commented Oct 24, 2023

boards: Add support for the NXP MIMXRT595 DSP core #61356

boards: Add support for the NXP MIMXRT595 DSP core #61356

Conversation

dluke62 commented Aug 10, 2023

DerekSnell left a comment

Choose a reason for hiding this comment

dbaluta commented Aug 10, 2023

iuliana-prodan commented Aug 10, 2023

dluke62 commented Aug 10, 2023 • edited Loading

dleach02 commented Aug 11, 2023

dbaluta commented Aug 11, 2023 • edited Loading

dluke62 commented Aug 11, 2023

dbaluta commented Aug 11, 2023 • edited Loading

DerekSnell left a comment

Choose a reason for hiding this comment

DerekSnell Aug 11, 2023

Choose a reason for hiding this comment

dbaluta commented Aug 16, 2023

hakehuang commented Sep 27, 2023

iuliana-prodan commented Sep 27, 2023 • edited Loading

hakehuang commented Sep 27, 2023 • edited Loading

marc-hb commented Sep 27, 2023 • edited Loading

iuliana-prodan commented Sep 27, 2023

dluke62 commented Sep 27, 2023

hakehuang commented Sep 28, 2023 • edited Loading

LaurentiuM1234 left a comment

Choose a reason for hiding this comment

dbaluta commented Oct 3, 2023

dluke62 commented Oct 5, 2023

dluke62 commented Oct 9, 2023

dluke62 commented Oct 23, 2023

dbaluta commented Oct 24, 2023 • edited Loading

dluke62 commented Oct 24, 2023

dluke62 commented Aug 10, 2023 •

edited

Loading

dbaluta commented Aug 11, 2023 •

edited

Loading

dbaluta commented Aug 11, 2023 •

edited

Loading

iuliana-prodan commented Sep 27, 2023 •

edited

Loading

hakehuang commented Sep 27, 2023 •

edited

Loading

marc-hb commented Sep 27, 2023 •

edited

Loading

hakehuang commented Sep 28, 2023 •

edited

Loading

dbaluta commented Oct 24, 2023 •

edited

Loading