Skip to content

libusb-based API to use the Seek Thermal Imager infrared camera

License

Notifications You must be signed in to change notification settings

zougloub/libseek

Repository files navigation

Seek Thermal Imager Library

Introduction

This library can be used to retrieve frames of Seek cameras.

Usage

See the seek-test.cpp example file to see how this is used.

At the moment, there is no thermal information provided by the library... that's TODO.

The example can be plugged onto ffmpeg like this:

./build/seek-test \
 | ffplay -i - -f rawvideo -video_size 208x156 -pixel_format gray16le

The library performs bad pixels correction based on a list of bad pixels; that list can be obtained by running:

# Get 100 raw frames... move the camera around while this runs
./build/seek-test-calib

# Generate bad pixels images (calib-avg.png, calib-std.png, calib-bpc-dead.png)
./test-calib.py

# Generate bad pixels correction structure
./seek_bpc.py

Installation

The library uses the waf build system to compile. This is done using something like (assuming you want to install to /usr):

curl https://waf.io/waf-1.8.14 > waf
python waf configure --prefix /usr
python waf
sudo python waf install --destdir /

The test scripts in Python use numpy and OpenCV, so you should have those dependencies installed to run the scripts.

Issues

The project home is on github: https://github.com/zougloub/libseek and issues can be reported there.

Credits

This library is using bits and pieces from work done by other people.

Thanks to Stephen Stair who put working code on github, and to the rest of the people discussing on the Yet another cheap thermal imager incoming.. Seek Thermal thread of the EEVblog Electronics Community Forum which was about the only thing I found when looking for existing stuff for my camera, once I could plug it on a real computer.

Thanks to David Tulloh for creating and maintaining https://github.com/lod/seek-thermal-documentation/

Legal

The code uses the MIT License as this is used by the winusbdotnet project which was partly slurped in here. See the LICENSE file along with the code.

The source code doesn't contain per-file headers, but this is no excuse for being evil.

The library was developed with interoperability in mind, ie. the goal of providing a working PC interface to the imager, which is yet another USB device, for the people who may have smashed their phone's glass.

Development

Contributing

Hey, this is on github, you know what to do!

TODO

  • Bad Pixel Compensation - Calibration clean-up

    Bad pixels (and bad clusters) are corrected by the core library, but the code used to generate the correction information is not that straightforward to use.

  • gstreamer source

  • Thermal information in the frame (retrieve min/max values)

  • Absolute temperature reading

  • Higher-level wrapper?

  • Movement-based super-resolution?

Device Information

Camera Information

The camera uses a microbolometer array of 12 µm pixels.

It has some kind of shutter, used to perform Flat Field Correction regularly (http://www.flir.com/cvs/cores/knowledgebase/index.cfm?CFTREEITEMKEY=342&view=35774, http://www.google.ca/patents/US8373757) and making the camera alternatively provide shutter images and scene images (shutter operating once every 23 pictures after start-up, and also generating one more unusable frame before the calibration frame).

Issues have been reported with the FFC, and a thermal gradient can be seen through the image.

The sensor array has a fraction (TODO provide) of what we'll call black pixels, pixels that carry no usable data by design. They are thought to exist to improve the SNR.

There are also bad pixels, which are relatively frequent, at least on my unit... where I can see TODO of them. Thus, some kind of compensation needs to be performed on these bad pixels.

Reading from the Camera

lsusb says:

Bus 002 Device 118: ID 289d:0010
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x289d
  idProduct          0x0010
  bcdDevice            1.00
  iManufacturer           1 Seek Thermal
  iProduct                2 PIR206 Thermal Camera
  iSerial                 5 @Ă耀
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           64
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    240
      bInterfaceProtocol      0
      iInterface              3 iAP Interface
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    240
      bInterfaceProtocol      1
      iInterface              4 com.thermal.pir206.1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       1
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    240
      bInterfaceProtocol      1
      iInterface              4 com.thermal.pir206.1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

This library is using the first interface iAP Interface.

The communication protocol is pretty simple, but there's no point (?) to understand it in order to write something usable. The camera is autonomous at providing data, after an initial configuration consisting in a handful of commands, and a "send me data now" request it will provide image frames.

There are different type of frames, that are identified by an in-band status byte located at position 20:

  • Regular frames (code 3)
  • Flat Field Calibration frames (code 1)
  • Drift Calibration frames (code 4 or 10)
  • Unusable frames (code 6), probably because the shutter is in progress
  • TBD (code 8)
  • TBD (code 7)
  • ...

The raw frame data contains regular "holes", values that are "black pixels" by design. The missing values are reconstructed using interpolation from neighboring cells. The locations are predicted, but it's also possible to identify them because the values are also missing in calibration frames.

Special frame locations:

  • At position 2, something that looks like it is related to the device temperature.
  • At position 20, the frame code
  • At position 80, a frame counter.

About

libusb-based API to use the Seek Thermal Imager infrared camera

Resources

License

Stars

Watchers

Forks

Packages

No packages published