sudo apt install python3-pip pip3 install pycomfoconnect pip3 install paho-mqtt
edit /home/comfoconnect/mqtt_to_node_red.py to set IP address
To get device_uuid need to run command: python3 /home/comfoconnect/mqtt_to_node_red.py -d
Zehnder Q350 ventilation unit MQTT to Domoticz
This is a mod for the python library that michael arnauts has written on https://github.com/michaelarnauts/comfoconnect/ so that it would work together with any MQTT enabled smart home software (openhab in my case).
Information using MQTT and Node-Red is push to Domoticz, at moment also from Domoticz can control Zehnder speeds.
Use commad: sudo nano /lib/systemd/system/confoconnect.service (add text from file confoconnect.service)
sudo chmod 644 /lib/systemd/system/confoconnect.service sudo systemctl daemon-reload sudo systemctl enable confoconnect.service
//to run script manualy python3 use command: python3 /home/comfoconnect/mqtt_to_node_red.py >> /home/comfoconnect/comfoconnect_gateway.log &
//to start service use command: systemctl start confoconnect systemctl stop confoconnect