Skip to content

KTHFSDV/zed_ros_driver_pkg

 
 

Repository files navigation

Stereolabs ZED Camera - ROS Integration

This package lets you use the ZED stereo camera with ROS. It outputs the camera left and right images, depth map, point cloud, pose information and supports the use of multiple ZED cameras.

More information

Getting started

Prerequisites

Note: an older version of the wrapper compatible with the SDK v2.8.x is available here

Build the program

The zed_ros_wrapper is a catkin package. It depends on the following ROS packages:

  • nav_msgs
  • tf2_geometry_msgs
  • message_runtime
  • catkin
  • roscpp
  • stereo_msgs
  • rosconsole
  • robot_state_publisher
  • urdf
  • sensor_msgs
  • image_transport
  • roslint
  • diagnostic_updater
  • dynamic_reconfigure
  • tf2_ros
  • message_generation
  • nodelet

Open a terminal, clone the repository, update the dependencies and build the packages:

$ cd ~/catkin_ws/src
$ git clone https://github.com/stereolabs/zed-ros-wrapper.git
$ cd ../
$ rosdep install --from-paths src --ignore-src -r -y
$ catkin_make -DCMAKE_BUILD_TYPE=Release
$ source ./devel/setup.bash

Run the program

To launch the ZED node use

ZED camera:

$ roslaunch zed_wrapper zed.launch

ZED Mini camera:

$ roslaunch zed_wrapper zedm.launch

ZED2 camera:

$ roslaunch zed_wrapper zed2.launch

To select the ZED from its serial number:

 $ roslaunch zed_wrapper zed.launch serial_number:=1010 #replace 1010 with the actual SN

Rviz visualization

Example launch files to start a pre-configured Rviz environment to visualize the data of ZED, ZED Mini and ZED 2 cameras are provided in the zed-ros-examples repository

SVO recording

SVO recording can be started and stopped while the ZED node is running using the service start_svo_recording and the service stop_svo_recording. More information

Object Detection

The SDK v3.0 introduces the Object Detection and Tracking module. The Object Detection module is available only with a ZED 2 camera.

The Object Detection can be enabled automatically when the node start setting the parameter object_detection/od_enabled to true in the file zed2.yaml.

The Object Detection can be enabled/disabled manually calling the services start_object_detection and stop_object_detection.

Spatial Mapping

The Spatial Mapping can be enabled automatically when the node start setting the parameter mapping/mapping_enabled to true in the file common.yaml. The Spatial Mapping can be enabled/disabled manually calling the services start_3d_mapping and stop_3d_mapping.

Diagnostic

The ZED node publishes diagnostic information that can be used by the robotic system using a diagnostic_aggregator node.

With the rqt plugin Runtime monitor, it is possible to retrieve all the diagnostic information, checking that the node is working as expected.

2D mode

For robots moving on a planar surface it is possible to activate the "2D mode" (parameter tracking/two_d_mode in common.yaml). The value of the coordinate Z for odometry and pose will have a fixed value (parameter tracking/fixed_z_value in common.yaml). Roll and pitch and relative velocities will be fixed to zero.

Examples and Tutorials

Examples and tutorials are provided to better understand how to use the ZED wrapper and how to integrate it in the ROS framework. See the zed-ros-examples repository

Examples

Alongside the wrapper itself and the Rviz display, a few examples are provided to interface the ZED with other ROS packages :

Tutorials

A few tutorials are provided to understand how to use the ZED node in the ROS environment :

About

ROS wrapper for the ZED SDK

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C++ 93.2%
  • CMake 3.2%
  • Python 1.9%
  • Dockerfile 1.1%
  • Shell 0.6%