-
Notifications
You must be signed in to change notification settings - Fork 30
Vfd_User_guide
CAUTION: This document is generated output from {X}fm source. Any modifications made to this file will certainly be overlaid by subsequent revisions. The proper way of maintaining the document is to modify the source file(s) in the repo, and generating the desired .pdf or .md versions of the document using {X}fm.
Virtual Function Daemon -- VFd
User's Guide
VFd is a daemon which manages the configuration of virtual and physical functions (VFs and PFs) which are exposed by an SR-IOV[1] capable network interface card (NIC). Configuration and management is accomplished via DPDK and allows for the following attributes to be controlled:
-
VLAN and MAC filtering (inbound)
-
Stripping of VLAN ID from inbound traffic
-
Addition of VLAN ID to outbound traffic
-
Enabling/disabling broadcast, multicast, unicast
The configuration information for each VF under the control
of VFd is supplied via a set of JSON encoded parameters, one
parameter set per file, located in the
/var/lib/vfd directory. An overall configuration
file for the daemon, also a set of JSON encoded parameters,
is managed in the /etc/vfd directory. The
command line tool iplex is used to communicate
with VFd and provides the mechanism to add or remove VF
configurations.
Under normal circumstances VFd, and any related software
tools, are installed on the system via some distribution
mechanism (chef, puppet, or the like), which is also
responsible for the creation of the configuration file in
/etc and ensures that the VFs have been created.
Nova, or some similar VM management environment
is generally responsible for creating the individual VF
configurations, placing them into the /var
directory, and using iplex to add the
configuration information as a VM is created.
At times it may be necessary to install and make use of VFd without the usual distribution and virtual environment management components. This guide provides a way to hack[2] together such a system and describes what is required to
-
Create the Virtual Functions associated with a Physical Function
-
Bind and unbind a VF or PF to/from a driver
-
Install the VFd components (.deb based)
-
Create the VFd configuration file
-
Create a VF configuration file and cause it to be used to configure a VF
-
Start and stop the daemon
Before VFd can be started, the PF which will provide VFs must
be identified and the VFs must be created. The lspci
command, generally using grep to limit
the output to ethernet devices, can be used to identify the
NICs on the system, and from that list the PFs which need to
be set up with VFs can be determined and the VFs added (see
the Limitations and Requirements section later in this
document for information regarding the number of VFs which
must be created for each PF).
Assuming the PF is 0000 the following can be
used to add VFs under it.
-
Cd to the device directory. (e.g.
/sys/devices/pci0000). -
Bind the PF to the
igb_uiodriver (if not already bound) -
Disable all current VFs (
echo 0 >max_vfs) -
Enable the number of VFs desired (
echo 32 >max_vfs) -
Verify that the VFs were added (ls -al in the directory and expect to find symbolic links like
virtfn3->../0000)
The above example shows the creation of 32 VFs; up to 32 VFs
may be added to a single PF. As a final step, the VFs should
be bound to the vfio-pci driver if they were
not automatically bound when created (in our lab they are
automatically bound, so this step may not be needed). The
dpdk_nic_bind utility (installed with VFd) can
be used to do this as illustrated in figure 1.
dpdk_nic_bind -b vfio-pci 0000:01:10.7
Figure 1: Command used to bind the vfio-pci driver to a VF.
Note that only the PCI address is needed for these commands,
and if another driver is bound to the VF it will
automatically be unbound first.
A logical question at this point would be how many VFs should I create? The answer depends on whether or not VFd will be running with quality of service (QoS) enabled. When running in QoS mode, it is a requirement that 31 VFs be created for each PF. When running in version 1 mode (QoS disabled), it is possible to allocate less than 32 VFs for a PF, but it is recommended to allocate 32.
The dpdk_nic_bind utility, dpdk-devbind
in releases after 16.11, can also be used to verify
the state of the various network interfaces on the system.
Executing with the --status option will cause
it to list all network interfaces. If the VFs were added, and
bound to the correct driver, the output from the command
should list them all under a heading which indicates that
they are bound to a DPDK capable driver. Figure 2 illustrates
the expected output which lists the PFs bound to the uio
driver and the VFs bound to the vfio-pci driver.
root@agave207:/var/log# dpdk_nic_bind --status
Network devices using DPDK-compatible driver
============================================
0000:08:00.0 'Ethernet 10G 2P X520 Adapter' drv=igb_uio unused=vfio-pci
0000:08:00.1 'Ethernet 10G 2P X520 Adapter' drv=igb_uio unused=vfio-pci
0000:08:10.0 '82599 Ethernet Controller Virtual Function' drv=vfio-pci unused=igb_uio
0000:08:10.1 '82599 Ethernet Controller Virtual Function' drv=vfio-pci unused=igb_uio
0000:08:10.2 '82599 Ethernet Controller Virtual Function' drv=vfio-pci unused=igb_uio
0000:08:10.7 '82599 Ethernet Controller Virtual Function' drv=vfio-pci unused=igb_uio
:
:
0000:08:17.5 '82599 Ethernet Controller Virtual Function' drv=vfio-pci unused=igb_uio
Network devices using kernel driver
===================================
0000:02:00.0 'NetXtreme BCM5720 Gigabit Ethernet PCIe' if=em1 drv=tg3 unused=igb_uio,vfio-pci *Active*
0000:02:00.1 'NetXtreme BCM5720 Gigabit Ethernet PCIe' if=em2 drv=tg3 unused=igb_uio,vfio-pci
Other network devices
=====================
<none>
Figure 2: Partial output generated by the dpdk_nic_bind utility with the --status option.
If a NIC has two physical interfaces, these will be grouped together from an IOMMU perspective, and in order for VFd to have access to the NICs, all of the devices in a group must be bound to a DPDK capable driver. If all devices belonging to a group are not bound to the DPDK capable driver, an error will be generated as VFd attempts to initialise, and the DPDK library will abort.
Given a known PF, it is simple to determine which other devices also belong to the same group. Figure 3 shows a simple set of commands[3] which can be used to find the location of a known PCI device and then all other devices in the same group. The output from the command shows the group number as the last directory in the path which is the group number. A subsequent list command can then be used to list all devices in that group.
find sys/kernel/iommu_groups -name 0000:01:00.1 | read p junk
ls ${p%/*}
Figure 3: Finding iommu group members.
VFd is distributed in a .deb package and can
be installed with a simple dpkg command. The
installation process creates the configuration directory in
/etc (adding a sample configuration file),
creates the necessary directories in the
/var/lib and /var/log directories,
and places the following programmes into
/usr/bin
vfd: The daemon itself (64 bit Linux binary)
iplex: The command line tool used to communicate with VFd (python 2.x)
vfd_pre_start: The script which manages the startup process (python)
dpdk_nic_bind: An opensource programme which facilitates the binding and unbinding of drivers to/from virtual and physical functions (python)
The installation process also installs the necessary _upstart _ mechanism allowing the familiar service command to be used to start and stop VFd.
The configuration file, vfd.conf, must be
created in /etc/vfd before VFd can be started.
The file contains a set of JSON encoded variables which are
illustrated in figure 4.
{
"comments": [
" test config file for vfd",
" manually generated for testing 2016/03/10",
" revised for agave207 2016/04/06"
],
"fifo": "/var/lib/vfd/request",
"log_dir": "/var/log/vfd",
"log_keep": 60,
"init_log_level": 2,
"log_level": 2,
"config_dir": "/var/lib/vfd/config",
"cpu_mask": "0x04",
"numa_mem": "64,64",
"dpdk_log_level": 2,
"dpdk_init_log_level": 8,
"default_mtu": 1500,
"pciids": [
{ "id": "0000:01:00.0", "mtu": 9000, "enable_loopback": false },
{ "id": "0000:01:00.1", "mtu": 9000, "enable_loopback": false }
]
}
Figure 4: A sample vfd.cfg configuration file.
Items worth noting in the config file are:
fifo: This is a named pipe which iplex uses to
communicate requests to VFd
log levels: The verbosity of running chatter emitted by VFd can be controlled by these settings. Four options are provided which control the chattiness during initialisation (usually more information is desired) and a level which affects the drivel after initialisation is complete. Log levels are supplied for both VFd proper and for the DPDK library functions as it is useful to control them separately.
config_dir: This is the directory where the individual VF configuration files are expected to be placed. The default is shown in the example.
cpu_mask: This is a single bit which indicates which CPU the DPDK library will associate with. VFd limits this value to a single bit, and odd results may occur if a multi-bit integer is given.
numa_mem: This is a string which supplies a comma separated set of values (e.g. 64,64). Each value is the amount of memory that the DPDK library will attempt to allocate on each respective NUMA socket 0 throgh n. If this parameter is not given, "64,64" is assumed. For single socket machines, a single value must be given or the DPDK library will fail during allocation and abort the process.
pciids: Explained in the following section
The array of pciids supplied in the configuration file defines the PFs which VFd will attempt to manage. In addition to the PCI address, the following value should be supplied:
mtu: The mtu value for the device. If omitted the _ default_mtu_ value described earlier is used.
enable_loopback: When set to true allows the NIC to act as a bridge and permits traffic from one guest to another, hosted on the same PF, to be looped directly back without going out on the physical wire. The default value is false.
Any field which VFd doesn't expect is ignored, and thus the
comments array allows the creator to document the
configuration without interfering with VFd Order of the
fields is unimportant, however the field names are case
sensitive.
With version 2, VFd supports a QoS (quality of service) allowing the system manager to define the traffic class and queue parameters which are then applied to the underlying NIC by VFd. These parameters exist as overall configuration information which is defined in the main VFd configuration file, and information which is specific to each VF and thus supplied in the configuration file for each VF.
The parameters allow QoS to be enabled, and define each of
the four supported traffic classes. In addition to separate
traffic classes, it is possible to group two or more of the
classes into what are known as bandwidth groups. The set of
parameters for QoS can be quite lengthy, and thus a complete
example is presented as an appendix to this document as a
part of an overall VFd configuration file. Figure 5
illustrates how each traffic class may be defined to VFd.
"tclasses": [
{
"name": "best effort",
"pri": 0,
"llatency": false,
"lsp": false,
"bsp": false,
"max_bw": 100,
"min_bw": 10
},
Figure 5: The QoS traffic class definition.
The traffic class definition object contains the following fields:
name: The traffic class name (future and/or diagnostic output).
pri: The priority of the traffic class (0 - 3 where 0 is the lowest).
lsp: When true, sets link strict priority on the class.
bst: When true, sets bandwidth group strict priority on the class.
max_bw: Maximum amount of bandwidth as a percentage (future).
min_bw: Minimum amount of bandwidth as a percentage (future).
By default, the percentages associated with any traffic class queue sharing (please refer to the section on configuring VFs for more details) must not exceed 100%. When a request to add a VF is made, VFd will examine the queue share settings in the VF configuration file and will reject the request if the new settings cause one or more of the queue percentage totals to exceed 100%. As an example, if two VFs are currently managed by VFd and each has been given 50% share of the priority 2 queue, it will be impossible to add another VF that defines a non-zero share for the priority 2 queue.
Over subscription allows for the sum of percentages of any traffic class queue to exceed 100%. When enabled, the percentages for each queue with a total exceeding 100% are normalised such that the values given to the NIC total 100%. Continuing the previous example, if a third VF is added, with a queue share of 20%, taking the total for the priority 2 queue to 120%, the actual percentages used when configuring the underlying hardware would be reduced to approximately 83% of the indicated value (41.5%, 41.5% and 16.6%).
To enable over subscription for a PF, he following field may
be added to any of the definitions in the pciid
array. (Please see Appendix A for a complete
example.)
"vf_oversubscription": true,
IF the set VF configuration files define one or more traffic classes which do not total 100%, the values are 'normalised up' such that the overall usage is equal to 100%.
By default, VFd starts up in non-QoS mode (v1 mode) and thus QoS must be enabled in the main configuration file in order for VFd to recognise any of the QoS configuration. The following configuration file parameter may be defined to enable QoS:
"enable_qos": true
The -q command line option can also be used to
turn on QoS which may be a more convenient way of enabling
this feature when testing.
The daemon can be started manually, or using the upstart start and stop commands as would be done for any other system service. When running manually the user must be root, and various command line options may be provided allowing for a diverse testing environment. The VFd command line syntax is:
vfd [-f] [-n] [-p config-parm-file] [-q]
Where:
-f: Causes VFd to run without detaching from the tty (foreground)
-n: Enables no-execution mode which prevents VFd from actually doing anything through DPDK
-p: Provides the filename of the configuration file
(default is /etc/vfd/vfd.cfg)
-q: Enable QoS.
[ IMAGE ] Figure 6: VFd process overview
The illustration in figure 6 shows the relationship of the
daemon with the iplex utility, configuration
files, and the assumed interaction with nova.
In a normal operation environment nova, or some similar
virtualisation manager, would create a configuration file for
each VM and place that file into the configuration directory
named in the main VFd config file. When manually managing the
environment, the hacker is responsible for creating these
files, adding them to the config directory, and using the
iplex command line tool to cause VFd to parse
and configure the NIC(s) based on the file contents. The
following sections describe this process and provide the
details of the VF configuration files.
VFd manages only the VFs which have been added to its view of
the world; if a configuration file is not provided for a
PF/VF combination, VFd makes no attempt to manage that VF.
This allows for VFs to be managed and/or used by other
elements on the system which do not need VFd supervision. VFd
will continue to manage (configure) a VF until the
configuration is deleted with an iplex
command.
The VF configuration file is a simple set of JSON encoded
parameters which defines the aspects of a single VF that VFd
is expected to manage. These files are typically in
/var/lib/vfd/config, however the directory where VFd
expects to find them may be set in the main VFd configuration
file.
{
"comments": [
" configure VF 1 on the pciid given",
" comments are ignored"
],
"name": "VM_daniels1/uuid-dummy-daniels-1",
"pciid": "9999:00:00.0",
"vfid": 1,
"strip_stag": false,
"allow_bcast": true,
"allow_mcast": true,
"allow_un_ucast": false,
"start_cb": "/var/lib/vmman/hot_plug daniels-1",
"stop_cb": "/var/lib/vmman/unplug daniels-1",
"vlans": [ 10, 11, 12, 33 ],
"macs": [ "86:04:30:18:11:04",
"11:22:33:44:55:66",
"ff:ff:ff:ff:ff:ff" ]
}
Figure 7: Sample VF configuration file normally created by nova.
Figure 7 provides a sample configuration which contains the following information:
name: Is any string provided by the user for
identification of the configuration file.
pciid: is the ID of the PF that the VF is allocated from.
vfid: Is the ID number (0-31) of the VF on the PF supplied by the pciid.
vlans: Is an array of one or more VLAN IDs which VFd will
configure on the VF. When more than one VLAN ID is supplied,
the strip_stag field ** must ** be set to _
false_ as when there are multiple IDs supplied it is
impossible for the NIC to know which ID to insert on outbound
traffic.
macs: Is an array of one or more MAC addresses which VFd will configure on the VF. Any MAC addresses placed into the array act as a whitelist and outbound (Tx) packets from the guest with any listed MAC address as the source will not be blocked. The MAC address assigned to the VF is automatically included in the list by VFd, and thus does ** not ** need to be supplied, therefore it is valid to have an empty MAC list.
start_cb: Is a command (script) which VFd will execute as the last step in the VFd start up process. (See section on callback command hooks below.)
stop_cb: Is a command (script) which VFd will execute as the first step in the VFd shutdown process.
There are limits to the number of MAC addresses and VLAN IDs wich can be supplied both for a single VF and across all VFs on each PF. Please refer to the limits section later in this document for more details.
The VF may be configured to automatically remove the VLAN tag
as each packet is received, and to automatically insert a
VLAN tag as each packet is transmitted. Both functions are
set with the same strip_stag field; as the
strip and insert operations are related, they are both either
enabled or disabled and thus only one field is necessary.
When this field is set to true, the array of
VLAN IDs must contain only a single ID as it is impossible
for the NIC to know which VLAN ID to insert if multiple IDs
are defined in the array. Thus, VFd will reject the
configuration if the strip stag field is set to true,
and the VLAN array has more than one element.
In addition to the parameters noted above, a set of QoS
parameters may be supplied in the VF configuration file.
These parameters, defined with the queues
array, are ignored when VFd is not started in QoS mode, and
are used to define the amount of bandwidth that the VF should
receive for outbound packets. The queues parameters are
illustrated in figure 8.
"queues": [
{ "priority": 0, "share": "10%" },
{ "priority": 1, "share": "14%" },
{ "priority": 2, "share": "20%" },
{ "priority": 3, "share": "10%" },
]
Figure 8: Quality of service parameters which may be supplied in a VF configuration file.
Each element in the QoS queues array defines the bandwidth
share for each of the four traffic classes that are
supported. Traffic classes are numbered from 0 (low priority)
to 3 (highest priority). In the illustration, the VF being
configured would be allocated 20% of the priority 2 traffic
class.
Traffic into a VF, out from a VF, or both, can be mirrored to
another VF on the same PF. Configuring this can be
accomplished by setting a mirror definition in the VF's
config file before it is added, or by using the iplex
mirror command. The latter is preferred as it allows
dynamic changes without affecting the current flow of traffic
to/from the VF, and as such the configuration file support is
not discussed here. (Refer to the debugging wiki page in the
repo for a more detailed coverage on mirroring.)
To alter the mirroring for a PF/VF pair the general syntax is:
sudo iplex mirror <pf> <vf> <direction> <target>
Where pf and vf define the VF whose traffic is to be mirrored and target defines the VF (on the same PF) that will receive the mirrored traffic. The direction indicates which traffic is to be mirrored, and is specified from the perspective of the VF, and NOT from the perspective of the NIC. Valid values are in to mirror Rx traffic (inbound), _ out_ to mirror Tx traffic (outbound), all to mirror all traffic, and off to disable mirroring.
The VF configuration files are placed into the directory
named in the main VFd configuration file, generally in
/var/lib/vfd/config and are named with any prefix and
a .json suffix. Once a configuration file is
placed into the directory, the iplex command
line tool is used to add the configuration to VFd. The
overall syntax for the iplex command is given in
figure 9, with an example of an add command, to add
VM1.json, is illustrated in figure 10.
Usage:
iplex (add | delete) <port-id> [--loglevel=<value>] [--debug]
iplex show (all | <port-id>) [--loglevel=<value>] [--debug]
iplex verbose [--loglevel=<value>]
iplex ping
iplex -h | --help
iplex --version
Options:
-h, --help show this help message and exit
--version show version and exit
--debug show debugging output
--loglevel=<value> Default logvalue [default: 0]
Figure 9: The usage output from the iplex command.
iplex add VM1
Figure 10: Sample iplex command to add a file named VM1.json to VFd's direct control.
If the loglevel value is given on the command
line the logging that VFd does during the processing of the
command will be increased to this level. If the loglevel
value is lower than the current setting in VFd, then the
value is ignored.
A configuration added will remain in use by VFd until it is
deleted. The iplex delete command is used to
cause VFd to eliminate the configuration from its view and to
delete JSON file from the configuration directory. When using
VFd in a hacked environment, care must be taken to preserve
the JSON file before invoking the delete command as VFd will
likely remove it from the directory. The delete command
syntax is similar to the add syntax illustrated earlier and
thus is omitted.
When VFd is started, it makes a pass through the
configuration directory and will add all of the JSON files
which it finds in the directory. This allows the existing
configuration to be reloaded easily when VFd is restarted.
VFd will ignore any files in the directory which do not
have a .json suffix; from a manual testing
perspective this allows test configuration files to be kept
in the directory (e.g. VM1.x) and copied into the desired
JSON file when needed.
The callback command hooks (start_cb and stop_cb) in the VF configuration allow the user to define a command which is executed at the end of VFd startup initialisation (start_cb) and just prior to the normal shut down processing when VFd is terminated (stop_cb). The commands are executed as the user which owns the configuration file, and the command may not contain an embedded semicolon (;). If multiple commands are needed, then a script should be used.
The exact use of these commands is unknown, however it has been observed that in some cases when VFd is restarted the ethernet driver in the VM fails to completely reinitialise requiring either an unload and reload of the driver, or similar. One way to force a complete reinitialisation of the VM's ethernet driver is to simulate a device removal followed by a device insertion which has shown to cause the driver to initialise to the point that the VM can again communicate over the device after VFd has been stopped and started.
Log files are written to the directory named in the VFd
config file (generally in /var/log). VFd will
create a dated log file (e.g. vfd.log.20160412
) and the log will be rolled to the next dated version with
the first message written after 00:00Z. Log messages are
dated with both a leading UNIX timestamp and human readable
date; all times are in zulu (Z). The bracketed number
following the date stamp indicates the log level of the
message (e.g. [2] indicates that the message is generated
when the loging level is set to 2 or greater). When a log
level parameter is used on an iplex command, the
more verbose output from VFd can be found in this log.
Any output from the DPDK library is written to standard
output (grumble) and is captured in the file vfd.std
in the same directory. This file is not rolled,
and with dpdk_loglevel settings less than 8 there is very
little, if any, output. When things seem to behaving badly,
set both of the dpdk log level settings to 8.
The upstart script(s) will also add a log file which might provide useful information should it appear that VFd is not starting properly.
There are several limitations and/or requirements which must be observed when configuring both the PFs on a system, and with respect to the configuration of each VF within VFd. The following must be observed, or unexpected behaviour will result.
When running with QoS enabled, VFd requires that 31 VFs (yes, 31, that is not a typo) be created for each PF. This ensures that the proper number of traffic classes are created, and allows one set of queues for the PF to 'own.'
When running with QoS disabled, it should be possible to configure any number of VFs from 1 through 32.
The number of MAC addresses which may be defined across all
VFs for a PF is limited by hardware to 128. When this limit
is reached VFd will refuse to allow a VF configuration to be
added (the result of the iplex add command
will be an error). Hardware also limits the number of MAC
addresses which may be supplied for a single VF to 64.
In a similar fashion to the MAC limits, the hardware limits the number of VLAN IDs which are configured across all VFs on a single PF to 64. VFd will enforce this limit by rejecting the attempt to add a VF configuration if the number of VLAN IDs supplied in the configuration file causes the total number of VLAN IDs defined for the PF to exceed this value.
A kernel version of 3.13.0-60 or later is required. VFd will likely run on earlier kernels, but there have been some which presented very odd packet dropping behaviour with earlier versions.
[1] A basic primer on SR-IOV can be found at xxxx://www.intel.com/content/dam/doc/application-note/pci-sig-sr-iov-primer-sr-iov-technology-paper.pdf
[2] We use the terms hack, hacker, and hacking in their original computer science sense. Hacking is the act of manually manipulating a programme or environment in order to tailor it to the programmer's needs. In a production environment, the overall VFd configuration, and the specifications of each underlying VF, will likely be managed by an automated process, however in a test environment it will be necessary for the systems programmer and/or tester to hack together the various configurations and to execute the necessary configuration commands to interact with VFd.
[3] All code fragments provided in this document assume Kshell; your mileage may vary with bash or other shells.
{
"comment": "config for agave207",
"log_dir": "/var/log/vfd",
"log_keep": 9,
"log_level": 3,
"init_log_level": 2,
"config_dir": "/var/lib/vfd/config",
"fifo": "/var/lib/vfd/request",
"cpu_mask": "0x01",
"numa_mem": "64,64",
"dpdk_log_level": 2,
"dpdk_init_log_level": 8,
"default_mtu": 9000,
"enable_qos": true,
"pciids": [
{ "id": "0000:08:00.0",
"mtu": 9000,
"enable_loopback": false,
"pf_driver": "igb-uio",
"vf_driver": "vfio-pci",
"vf_oversubscription": true,
"tc_comment": "traffic classes define human readable name, tc number (priority) and other parms",
"tclasses": [
{
"name": "best effort",
"pri": 0,
"llatency": false,
"lsp": false,
"bsp": false,
"max_bw": 100,
"min_bw": 10
},
{
"name": "realtime",
"pri": 1,
"llatency": false,
"lsp": false,
"bsp": false,
"max_bw": 100,
"min_bw": 40
},
{
"name": "voice",
"pri": 2,
"llatency": false,
"lsp": false,
"bsp": false,
"max_bw": 100,
"min_bw": 40
},
{
"name": "control",
"pri": 3,
"llatency": false,
"lsp": false,
"bsp": false,
"max_bw": 100,
"min_bw": 10
}
],
"bwg_comment": "groups traffic classes together, min derived from TC values",
"bw_grps":
{
"bwg0": [0],
"bwg1": [1, 2],
"bwg2": [3]
}
},
{ "id": "0000:08:00.1",
"mtu": 9000,
"enable_loopback": false,
"pf_driver": "igb-uio",
"vf_driver": "vfio-pci",
"vf_oversubscription": false,
"tclasses": [
{
"name": "best effort",
"pri": 0,
"llatency": false,
"lsp": false,
"bsp": false,
"max_bw": 100,
"min_bw": 10
},
{
"name": "realtime",
"pri": 1,
"llatency": false,
"lsp": false,
"bsp": false,
"max_bw": 100,
"min_bw": 40
},
{
"name": "voice",
"pri": 2,
"llatency": false,
"lsp": false,
"bsp": false,
"max_bw": 100,
"min_bw": 40
},
{
"name": "control",
"pri": 3,
"llatency": false,
"lsp": false,
"bsp": false,
"max_bw": 100,
"min_bw": 10
}
],
"bw_grps":
{
"bwg0": [0],
"bwg1": [1, 2],
"bwg2": [3]
}
}
]
}
{
"comments": "",
"name": "daniels_0_1",
"pciid": "0000:08:00.0",
"vfid": 2,
"strip_stag": true,
"allow_bcast": true,
"allow_mcast": true,
"allow_un_ucast": false,
"vlan_anti_spoof": true,
"mac_anti_spoof": true,
"vlans": [ 10 ],
"macs": [ "04:30:86:11:04:17" ],
"queues": [
{ "priority": 0, "share": "10%" },
{ "priority": 1, "share": "10%" },
{ "priority": 2, "share": "10%" },
{ "priority": 3, "share": "10%" },
]
}
CAUTION: This document is generated output from {X}fm source. Any modifications made to this file will certainly be overlaid by subsequent revisions. The proper way of maintaining the document is to modify the source file(s) in the repo, and generating the desired .pdf or .md versions of the document using {X}fm.
Source: vfd_hackers.xfm
Original: 12 April 2016
Revised: 7 February 2018
Formatter: tfm V2.2/0a266