v1.0.5007

New in 1.0.5007

Read the complete migration guide to get the full list of changes as well as recommendations
on how to do the migration.

https://geteventflow.net/migrations/v0-to-v1/

(If you see any changes you feel ownership of and you want you name there, create an issue
and it will get fixed asap. EventFlow would be where it is today without the grate community
contributions that it have received over the years)

Changes since last 1.x pre-release, 1.0.5003-alpha

• New: .NET 8 support
• New: Enable IEventStore to load events to a given sequence number (thanks @SeWaS)
• New: EventFlow.Hangfire now part of the v1 release cycle (thanks @nicolaj-hartmann)
• Fix/breaking: Switch from System.Data.SqlClient to Microsoft.Data.SqlClient (thanks @janrybka)

Changes since last 1.x pre-release, 1.0.5002-alpha

• New: Read model rebuilder can be done across multiple read model types. The piping of events
  and applying them are now done concurrently to reduced memory usage and significantly improve
  time to completion (by @kyle-bradley)
• New: Created EventFlow.Redis (by @joshua211)
• New: Migrated EventFlow.RabbitMQ to v1 (by @kyle-bradley)
• Breaking: Removed old EventFlow.Shims.Tasks class that provided a wrapper for Task.CompletedTask
  in frameworks that did not have it

Changes since last 1.x pre-release, 1.0.5001-alpha

• New/breaking: IEventUpgrader<,> are now (finally) async. For an easy upgrade experience,
  use the new base class EventUpgraderNonAsync for any existing upgraders. Its a abstract
  class that implements the updated interface and provides a abstract method with the same
  signature as the previous interface
• Fix/breaking: Event upgraders are now used during read model population. As the upgraders
  are re-used across multiple aggregates, there is a high likelihood that some additions are
  needed in any existing upgraders. Upgraders are stored on the new IEventUpgradeContext,
  which is created by the new IEventUpgradeContextFactory. Replace this if you need addition
  context during event upgrades
• Fix: SnapshotAggregateRoot now correctly loads previous source IDs as well
  adds the current source ID that triggered the snapshot. This causes the
  DuplicateOperationException to be correctly thrown if a duplicate source
  ID as added before a snapshot was taken
• Fix: Upgrade Newtonsoft.Json from 11.0.2 to 13.0.1 to fix DoS
  vulnerability
  • GHSA-5crp-9r3c-p9vr
  • https://security.snyk.io/vuln/SNYK-DOTNET-NEWTONSOFTJSON-2774678
• Fix: UseFilesEventPersistence should no longer throw exception for .NET regarding relative paths

Complete 1.0 change log

• New: Read model rebuilder can be done across multiple read model types. The piping of events
  and applying them are now done concurrently to reduced memory usage and significantly improve
  time to completion (by @kyle-bradley)
• New: Created EventFlow.Redis (by @joshua211)
• New/breaking: Replace internal IoC implementation with Microsoft.Extensions.DependencyInjection
• New/breaking: Replace internal logging implementation with Microsoft.Extensions.Logging
• New/breaking: SQL read models now support different connection strings using the
  [SqlReadModelConnectionStringName] attribute. To allow executing queries using different
  connection strings, all methods on IMsSqlConnection and ISqlConnection now have an
  additional argument, string connectionStringName to signify which connection string
  should be used for the query
• New/breaking: SQL connection strings are now fetched from the
  SqlConfiguration<T>.GetConnectionStringAsync(...) instead of a property, allowing more
  control of the connection string used at runtime
• New/breaking: IEventUpgrader<,> are now (finally) async. For an easy upgrade experience,
  use the new base class EventUpgraderNonAsync for any existing upgraders. Its a abstract
  class that implements the updated interface and provides a abstract method with the same
  signature as the previous interface
• New: Its now possible to change the execution timeout for database migrations using the
  SetUpgradeExecutionTimeout(...) on the SQL configuration
• Fix/breaking: Event upgraders are now used during read model population. As the upgraders
  are re-used across multiple aggregates, there is a high likelihood that some additions are
  needed in any existing upgraders. Upgraders are stored on the new IEventUpgradeContext,
  which is created by the new IEventUpgradeContextFactory. Replace this if you need addition
  context during event upgrades
• Breaking: Removed the following dead and/or confusion MSSQL attributes. The real ones
  are named the same, with with Sql... instead of MsSql...
  • MsSqlReadModelIdentityColumn
  • MsSqlReadModelIgnoreColumn
  • MsSqlReadModelVersionColumn
• Breaking: Methods on IMsSqlDatabaseMigrator and ISqlDatabaseMigrator have been
  made async and have an extra CancellationToken argument
• Breaking: Remove support for .NET Framework and consolidate on .NET (Core) LTS versions
• Breaking: Replace internal in-memory caching with Microsoft.Extensions.Caching.Memory
• Breaking: Removed IAmAsyncReadModelFor and made IAmReadModelFor async
• Breaking: Removed EventFlow.Core.AsyncHelper as well as all async wrapper methods
  that used it
  • IAggregateStore.Load
  • IAggregateStore.Store
  • IAggregateStore.Update
  • ICommandBus.Publish
  • IEventStore.LoadAggregate
  • IEventStore.LoadEvents
  • IEventStore.LoadAllEvents
  • IQueryProcessor.Process
  • IReadModelPopulator.Populate
  • IReadModelPopulator.Purge
• Breaking: Removed old EventFlow.Shims.Tasks class that provided a wrapper for Task.CompletedTask
  in frameworks that did not have it
• Fix: SnapshotAggregateRoot now correctly loads previous source IDs as well
  adds the current source ID that triggered the snapshot. This causes the
  DuplicateOperationException to be correctly thrown if a duplicate source
  ID as added before a snapshot was taken
• Fix: Upgrade Newtonsoft.Json from 11.0.2 to 13.0.1 to fix DoS
  vulnerability
  • GHSA-5crp-9r3c-p9vr
  • https://security.snyk.io/vuln/SNYK-DOTNET-NEWTONSOFTJSON-2774678
• Version of 0.x included: 0.83.4713. 0.x changes are merged to 1.x at regular
  intervals, but might be one or two releases behind

v1.0.5004-alpha

New in 1.0-alpha

Read the complete migration guide to get the full list of changes as well as recommendations
on how to do the migration.

https://github.com/eventflow/EventFlow/blob/develop-v1/MIGRATION_GUIDE.md

(If you see any changes you feel ownership of and you want you name there, create an issue
and it will get fixed asap. EventFlow would be where it is today without the grate community
contributions that it have received over the years)

Changes since last 1.x pre-release, 1.0.5003-alpha

• New: .NET 8 support
• New: Enable IEventStore to load events to a given sequence number (thanks @SeWaS)
• New: EventFlow.Hangfire now part of the v1 release cycle (thanks @nicolaj-hartmann)
• Fix/breaking: Switch from System.Data.SqlClient to Microsoft.Data.SqlClient (thanks @janrybka)

Changes since last 1.x pre-release, 1.0.5002-alpha

• New: Read model rebuilder can be done across multiple read model types. The piping of events
  and applying them are now done concurrently to reduced memory usage and significantly improve
  time to completion (by @kyle-bradley)
• New: Created EventFlow.Redis (by @joshua211)
• New: Migrated EventFlow.RabbitMQ to v1 (by @kyle-bradley)
• Breaking: Removed old EventFlow.Shims.Tasks class that provided a wrapper for Task.CompletedTask
  in frameworks that did not have it

Changes since last 1.x pre-release, 1.0.5001-alpha

• New/breaking: IEventUpgrader<,> are now (finally) async. For an easy upgrade experience,
  use the new base class EventUpgraderNonAsync for any existing upgraders. Its a abstract
  class that implements the updated interface and provides a abstract method with the same
  signature as the previous interface
• Fix/breaking: Event upgraders are now used during read model population. As the upgraders
  are re-used across multiple aggregates, there is a high likelihood that some additions are
  needed in any existing upgraders. Upgraders are stored on the new IEventUpgradeContext,
  which is created by the new IEventUpgradeContextFactory. Replace this if you need addition
  context during event upgrades
• Fix: SnapshotAggregateRoot now correctly loads previous source IDs as well
  adds the current source ID that triggered the snapshot. This causes the
  DuplicateOperationException to be correctly thrown if a duplicate source
  ID as added before a snapshot was taken
• Fix: Upgrade Newtonsoft.Json from 11.0.2 to 13.0.1 to fix DoS
  vulnerability
  • GHSA-5crp-9r3c-p9vr
  • https://security.snyk.io/vuln/SNYK-DOTNET-NEWTONSOFTJSON-2774678
• Fix: UseFilesEventPersistence should no longer throw exception for .NET regarding relative paths

Complete 1.0 change log

• New: Read model rebuilder can be done across multiple read model types. The piping of events
  and applying them are now done concurrently to reduced memory usage and significantly improve
  time to completion (by @kyle-bradley)
• New: Created EventFlow.Redis (by @joshua211)
• New/breaking: Replace internal IoC implementation with Microsoft.Extensions.DependencyInjection
• New/breaking: Replace internal logging implementation with Microsoft.Extensions.Logging
• New/breaking: SQL read models now support different connection strings using the
  [SqlReadModelConnectionStringName] attribute. To allow executing queries using different
  connection strings, all methods on IMsSqlConnection and ISqlConnection now have an
  additional argument, string connectionStringName to signify which connection string
  should be used for the query
• New/breaking: SQL connection strings are now fetched from the
  SqlConfiguration<T>.GetConnectionStringAsync(...) instead of a property, allowing more
  control of the connection string used at runtime
• New/breaking: IEventUpgrader<,> are now (finally) async. For an easy upgrade experience,
  use the new base class EventUpgraderNonAsync for any existing upgraders. Its a abstract
  class that implements the updated interface and provides a abstract method with the same
  signature as the previous interface
• New: Its now possible to change the execution timeout for database migrations using the
  SetUpgradeExecutionTimeout(...) on the SQL configuration
• Fix/breaking: Event upgraders are now used during read model population. As the upgraders
  are re-used across multiple aggregates, there is a high likelihood that some additions are
  needed in any existing upgraders. Upgraders are stored on the new IEventUpgradeContext,
  which is created by the new IEventUpgradeContextFactory. Replace this if you need addition
  context during event upgrades
• Breaking: Removed the following dead and/or confusion MSSQL attributes. The real ones
  are named the same, with with Sql... instead of MsSql...
  • MsSqlReadModelIdentityColumn
  • MsSqlReadModelIgnoreColumn
  • MsSqlReadModelVersionColumn
• Breaking: Methods on IMsSqlDatabaseMigrator and ISqlDatabaseMigrator have been
  made async and have an extra CancellationToken argument
• Breaking: Remove support for .NET Framework and consolidate on .NET (Core) LTS versions
• Breaking: Replace internal in-memory caching with Microsoft.Extensions.Caching.Memory
• Breaking: Removed IAmAsyncReadModelFor and made IAmReadModelFor async
• Breaking: Removed EventFlow.Core.AsyncHelper as well as all async wrapper methods
  that used it
  • IAggregateStore.Load
  • IAggregateStore.Store
  • IAggregateStore.Update
  • ICommandBus.Publish
  • IEventStore.LoadAggregate
  • IEventStore.LoadEvents
  • IEventStore.LoadAllEvents
  • IQueryProcessor.Process
  • IReadModelPopulator.Populate
  • IReadModelPopulator.Purge
• Breaking: Removed old EventFlow.Shims.Tasks class that provided a wrapper for Task.CompletedTask
  in frameworks that did not have it
• Fix: SnapshotAggregateRoot now correctly loads previous source IDs as well
  adds the current source ID that triggered the snapshot. This causes the
  DuplicateOperationException to be correctly thrown if a duplicate source
  ID as added before a snapshot was taken
• Fix: Upgrade Newtonsoft.Json from 11.0.2 to 13.0.1 to fix DoS
  vulnerability
  • GHSA-5crp-9r3c-p9vr
  • https://security.snyk.io/vuln/SNYK-DOTNET-NEWTONSOFTJSON-2774678
• Version of 0.x included: 0.83.4713. 0.x changes are merged to 1.x at regular
  intervals, but might be one or two releases behind

v1.0.5003-alpha

New in 1.0-alpha

Read the complete migration guide to get the full list of changes as well as recommendations
on how to do the migration.

https://github.com/eventflow/EventFlow/blob/develop-v1/MIGRATION_GUIDE.md

(If you see any changes you feel ownership of and you want you name there, create an issue
and it will get fixed asap. EventFlow would be where it is today without the grate community
contributions that it have received over the years)

Changes since last 1.x pre-release, 1.0.5002-alpha

• New: Read model rebuilder can be done across multiple read model types. The piping of events
  and applying them are now done concurrently to reduced memory usage and significantly improve
  time to completion (by @kyle-bradley)
• New: Created EventFlow.Redis (by @joshua211)
• New: Migrated EventFlow.RabbitMQ to v1 (by @kyle-bradley)
• Breaking: Removed old EventFlow.Shims.Tasks class that provided a wrapper for Task.CompletedTask
  in frameworks that did not have it

Changes since last 1.x pre-release, 1.0.5001-alpha

• New/breaking: IEventUpgrader<,> are now (finally) async. For an easy upgrade experience,
  use the new base class EventUpgraderNonAsync for any existing upgraders. Its a abstract
  class that implements the updated interface and provides a abstract method with the same
  signature as the previous interface
• Fix/breaking: Event upgraders are now used during read model population. As the upgraders
  are re-used across multiple aggregates, there is a high likelihood that some additions are
  needed in any existing upgraders. Upgraders are stored on the new IEventUpgradeContext,
  which is created by the new IEventUpgradeContextFactory. Replace this if you need addition
  context during event upgrades
• Fix: SnapshotAggregateRoot now correctly loads previous source IDs as well
  adds the current source ID that triggered the snapshot. This causes the
  DuplicateOperationException to be correctly thrown if a duplicate source
  ID as added before a snapshot was taken
• Fix: Upgrade Newtonsoft.Json from 11.0.2 to 13.0.1 to fix DoS
  vulnerability
  • GHSA-5crp-9r3c-p9vr
  • https://security.snyk.io/vuln/SNYK-DOTNET-NEWTONSOFTJSON-2774678
• Fix: UseFilesEventPersistence should no longer throw exception for .NET regarding relative paths

Complete 1.0 change log

• New: Read model rebuilder can be done across multiple read model types. The piping of events
  and applying them are now done concurrently to reduced memory usage and significantly improve
  time to completion (by @kyle-bradley)
• New: Created EventFlow.Redis (by @joshua211)
• New/breaking: Replace internal IoC implementation with Microsoft.Extensions.DependencyInjection
• New/breaking: Replace internal logging implementation with Microsoft.Extensions.Logging
• New/breaking: SQL read models now support different connection strings using the
  [SqlReadModelConnectionStringName] attribute. To allow executing queries using different
  connection strings, all methods on IMsSqlConnection and ISqlConnection now have an
  additional argument, string connectionStringName to signify which connection string
  should be used for the query
• New/breaking: SQL connection strings are now fetched from the
  SqlConfiguration<T>.GetConnectionStringAsync(...) instead of a property, allowing more
  control of the connection string used at runtime
• New/breaking: IEventUpgrader<,> are now (finally) async. For an easy upgrade experience,
  use the new base class EventUpgraderNonAsync for any existing upgraders. Its a abstract
  class that implements the updated interface and provides a abstract method with the same
  signature as the previous interface
• New: Its now possible to change the execution timeout for database migrations using the
  SetUpgradeExecutionTimeout(...) on the SQL configuration
• Fix/breaking: Event upgraders are now used during read model population. As the upgraders
  are re-used across multiple aggregates, there is a high likelihood that some additions are
  needed in any existing upgraders. Upgraders are stored on the new IEventUpgradeContext,
  which is created by the new IEventUpgradeContextFactory. Replace this if you need addition
  context during event upgrades
• Breaking: Removed the following dead and/or confusion MSSQL attributes. The real ones
  are named the same, with with Sql... instead of MsSql...
  • MsSqlReadModelIdentityColumn
  • MsSqlReadModelIgnoreColumn
  • MsSqlReadModelVersionColumn
• Breaking: Methods on IMsSqlDatabaseMigrator and ISqlDatabaseMigrator have been
  made async and have an extra CancellationToken argument
• Breaking: Remove support for .NET Framework and consolidate on .NET (Core) LTS versions
• Breaking: Replace internal in-memory caching with Microsoft.Extensions.Caching.Memory
• Breaking: Removed IAmAsyncReadModelFor and made IAmReadModelFor async
• Breaking: Removed EventFlow.Core.AsyncHelper as well as all async wrapper methods
  that used it
  • IAggregateStore.Load
  • IAggregateStore.Store
  • IAggregateStore.Update
  • ICommandBus.Publish
  • IEventStore.LoadAggregate
  • IEventStore.LoadEvents
  • IEventStore.LoadAllEvents
  • IQueryProcessor.Process
  • IReadModelPopulator.Populate
  • IReadModelPopulator.Purge
• Breaking: Removed old EventFlow.Shims.Tasks class that provided a wrapper for Task.CompletedTask
  in frameworks that did not have it
• Fix: SnapshotAggregateRoot now correctly loads previous source IDs as well
  adds the current source ID that triggered the snapshot. This causes the
  DuplicateOperationException to be correctly thrown if a duplicate source
  ID as added before a snapshot was taken
• Fix: Upgrade Newtonsoft.Json from 11.0.2 to 13.0.1 to fix DoS
  vulnerability
  • GHSA-5crp-9r3c-p9vr
  • https://security.snyk.io/vuln/SNYK-DOTNET-NEWTONSOFTJSON-2774678
• Version of 0.x included: 0.83.4713. 0.x changes are merged to 1.x at regular
  intervals, but might be one or two releases behind

v1.0.5002-alpha

New in 1.0-alpha (not released yet)

IMPORTANT: Major API breaking changes might occur between 1.0 pre-releases. As breaking
API changes will need to be tested and verified before the final 1.0 release.

Read the complete migration guide to get the full list of changes as well
as recommendations on how to do the migration.

https://github.com/eventflow/EventFlow/blob/develop-v1/MIGRATION_GUIDE.md

Changes since last 1.x pre-release, 1.0.5001-alpha

• New/breaking: IEventUpgrader<,> are now (finally) async. For an easy upgrade experience,
  use the new base class EventUpgraderNonAsync for any existing upgraders. Its a abstract
  class that implements the updated interface and provides a abstract method with the same
  signature as the previous interface
• Fix/breaking: Event upgraders are now used during read model population. As the upgraders
  are re-used across multiple aggregates, there is a high likelihood that some additions are
  needed in any existing upgraders. Upgraders are stored on the new IEventUpgradeContext,
  which is created by the new IEventUpgradeContextFactory. Replace this if you need addition
  context during event upgrades
• Fix: SnapshotAggregateRoot now correctly loads previous source IDs as well
  adds the current source ID that triggered the snapshot. This causes the
  DuplicateOperationException to be correctly thrown if a duplicate source
  ID as added before a snapshot was taken
• Fix: Upgrade Newtonsoft.Json from 11.0.2 to 13.0.1 to fix DoS
  vulnerability
  • GHSA-5crp-9r3c-p9vr
  • https://security.snyk.io/vuln/SNYK-DOTNET-NEWTONSOFTJSON-2774678
• Fix: UseFilesEventPersistence should no longer throw exception for .NET regarding relative paths

Complete 1.0 change log

• New/breaking: Replace internal IoC implementation with Microsoft.Extensions.DependencyInjection
• New/breaking: Replace internal logging implementation with Microsoft.Extensions.Logging
• New/breaking: SQL read models now support different connection strings using the
  [SqlReadModelConnectionStringName] attribute. To allow executing queries using different
  connection strings, all methods on IMsSqlConnection and ISqlConnection now have an
  additional argument, string connectionStringName to signify which connection string
  should be used for the query
• New/breaking: SQL connection strings are now fetched from the
  SqlConfiguration<T>.GetConnectionStringAsync(...) instead of a property, allowing more
  control of the connection string used at runtime
• New/breaking: IEventUpgrader<,> are now (finally) async. For an easy upgrade experience,
  use the new base class EventUpgraderNonAsync for any existing upgraders. Its a abstract
  class that implements the updated interface and provides a abstract method with the same
  signature as the previous interface
• Fix/breaking: Event upgraders are now used during read model population. As the upgraders
  are re-used across multiple aggregates, there is a high likelihood that some additions are
  needed in any existing upgraders. Upgraders are stored on the new IEventUpgradeContext,
  which is created by the new IEventUpgradeContextFactory. Replace this if you need addition
  context during event upgrades
• New: Its now possible to change the execution timeout for database migrations using the
  SetUpgradeExecutionTimeout(...) on the SQL configuration
• Breaking: Removed the following dead and/or confusion MSSQL attributes. The real ones
  are named the same, with with Sql... instead of MsSql...
  • MsSqlReadModelIdentityColumn
  • MsSqlReadModelIgnoreColumn
  • MsSqlReadModelVersionColumn
• Breaking: Methods on IMsSqlDatabaseMigrator and ISqlDatabaseMigrator have been
  made async and have an extra CancellationToken argument
• Breaking: Remove support for .NET Framework and consolidate on .NET (Core) LTS versions
• Breaking: Replace internal in-memory caching with Microsoft.Extensions.Caching.Memory
• Breaking: Removed IAmAsyncReadModelFor and made IAmReadModelFor async
• Breaking: Removed EventFlow.Core.AsyncHelper as well as all async wrapper methods
  that used it
  • IAggregateStore.Load
  • IAggregateStore.Store
  • IAggregateStore.Update
  • ICommandBus.Publish
  • IEventStore.LoadAggregate
  • IEventStore.LoadEvents
  • IEventStore.LoadAllEvents
  • IQueryProcessor.Process
  • IReadModelPopulator.Populate
  • IReadModelPopulator.Purge
• Fix: SnapshotAggregateRoot now correctly loads previous source IDs as well
  adds the current source ID that triggered the snapshot. This causes the
  DuplicateOperationException to be correctly thrown if a duplicate source
  ID as added before a snapshot was taken
• Fix: Upgrade Newtonsoft.Json from 11.0.2 to 13.0.1 to fix DoS
  vulnerability
  • GHSA-5crp-9r3c-p9vr
  • https://security.snyk.io/vuln/SNYK-DOTNET-NEWTONSOFTJSON-2774678
• Version of 0.x included: 0.83.4713. 0.x changes are merged to 1.x at regular
  intervals, but might be one or two releases behind

v1.0.5001-alpha

IMPORTANT: Major API breaking changes might occur between 1.0 pre-releases. As breaking
API changes will need to be tested and verified before the final 1.0 release.

Read the complete migration guide to get the full list of changes as well
as recommendations on how to do the migration.

https://github.com/eventflow/EventFlow/blob/develop-v1/MIGRATION_GUIDE.md

• New/breaking: Replace internal IoC implementation with Microsoft.Extensions.DependencyInjection
• New/breaking: Replace internal logging implementation with Microsoft.Extensions.Logging
• New/breaking: SQL read models now support different connection strings using the
  [SqlReadModelConnectionStringName] attribute. To allow executing queries using different
  connection strings, all methods on IMsSqlConnection and ISqlConnection now have an
  additional argument, string connectionStringName to signify which connection string
  should be used for the query
• New/breaking: SQL connection strings are now fetched from the
  SqlConfiguration<T>.GetConnectionStringAsync(...) instead of a property, allowing more
  control of the connection string used at runtime
• New: Its now possible to change the execution timeout for database migrations using the
  SetUpgradeExecutionTimeout(...) on the SQL configuration
• Breaking: Removed the following dead and/or confusion MSSQL attributes. The real ones
  are named the same, with with Sql... instead of MsSql...
  • MsSqlReadModelIdentityColumn
  • MsSqlReadModelIgnoreColumn
  • MsSqlReadModelVersionColumn
• Breaking: Methods on IMsSqlDatabaseMigrator and ISqlDatabaseMigrator have been
  made async and have an extra CancellationToken argument
• Breaking: Remove support for .NET Framework and consolidate on .NET (Core) LTS versions
• Breaking: Replace internal in-memory caching with Microsoft.Extensions.Caching.Memory
• Breaking: Removed IAmAsyncReadModelFor and made IAmReadModelFor async
• Breaking: Removed EventFlow.Core.AsyncHelper as well as all async wrapper methods
  that used it
  • IAggregateStore.Load
  • IAggregateStore.Store
  • IAggregateStore.Update
  • ICommandBus.Publish
  • IEventStore.LoadAggregate
  • IEventStore.LoadEvents
  • IEventStore.LoadAllEvents
  • IQueryProcessor.Process
  • IReadModelPopulator.Populate
  • IReadModelPopulator.Purge
• Version of 0.x included: 0.83.4713. 0.x changes are merged to 1.x at regular
  intervals, but might be one or two releases behind

v1.0.4748-alpha

IMPORTANT: Major API breaking changes might occur between 1.0 pre-releases. As breaking
API changes will need to be tested and verified before the final 1.0 release.

Read the complete migration guide to get the full list of changes as well
as recommendations on how to do the migration.

https://github.com/eventflow/EventFlow/blob/develop-v1/MIGRATION_GUIDE.md

• New/breaking: Replace internal IoC implementation with Microsoft.Extensions.DependencyInjection
• New/breaking: Replace internal logging implementation with Microsoft.Extensions.Logging
• New/breaking: SQL read models now support different connection strings using the
  [SqlReadModelConnectionStringName] attribute. To allow executing queries using different
  connection strings, all methods on IMsSqlConnection and ISqlConnection now have an
  additional argument, string connectionStringName to signify which connection string
  should be used for the query
• New/breaking: SQL connection strings are now fetched from the
  SqlConfiguration<T>.GetConnectionStringAsync(...) instead of a property, allowing more
  control of the connection string used at runtime
• New: Its now possible to change the execution timeout for database migrations using the
  SetUpgradeExecutionTimeout(...) on the SQL configuration
• Breaking: Removed the following dead and/or confusion MSSQL attributes. The real ones
  are named the same, with with Sql... instead of MsSql...
  • MsSqlReadModelIdentityColumn
  • MsSqlReadModelIgnoreColumn
  • MsSqlReadModelVersionColumn
• Breaking: Methods on IMsSqlDatabaseMigrator and ISqlDatabaseMigrator have been
  made async and have an extra CancellationToken argument
• Breaking: Remove support for .NET Framework and consolidate on .NET Core LTS versions
• Breaking: Replace internal in-memory caching with Microsoft.Extensions.Caching.Memory
• Breaking: Removed IAmAsyncReadModelFor and made IAmReadModelFor async
• Breaking: Removed EventFlow.Core.AsyncHelper as well as all async wrapper methods
  that used it
  • IAggregateStore.Load
  • IAggregateStore.Store
  • IAggregateStore.Update
  • ICommandBus.Publish
  • IEventStore.LoadAggregate
  • IEventStore.LoadEvents
  • IEventStore.LoadAllEvents
  • IQueryProcessor.Process
  • IReadModelPopulator.Populate
  • IReadModelPopulator.Purge
• Version of 0.x included: 0.83.4713. 0.x changes are merged to 1.x at regular
  intervals, but might be one or two releases behind

v0.83.4713

• New: Queue name used by HangfireJobScheduler can be overridden:

  eventFlowOptions.UseHangfireJobScheduler(o => o.UseQueueName("myqueue"))

• Fixed: Do not throw MetadataKeyNotFoundException if there is no meta data on
  previous_source_ids in snapshots

v0.82.4684

• Fix: Allow the use of explicitly implemented interfaces in the read model
• New: added extension methods to the EventFlow.EntityFramework package that allow
  us to configure eager loading of related data. Example usage:

  public static IEventFlowOptions Configure(this IEventFlowOptions options)
  {
    return options
      .UseEntityFrameworkReadModel<MyEntity, MyDbContext>(
        cfg => cfg.Include(x => x.SomeProperty)
                  .ThenInclude(y => y.SomeOtherProperty)
      );
  }

v0.82.4659

• Fix: Source IDs are now added to snapshots
• Fix: InMemoryReadStore will not break on unmodified update result

v1.0.4617-alpha

Read the complete migration guide to get the full list of changes as well
as recommendations on how to do the migration.

https://github.com/eventflow/EventFlow/blob/develop-v1/MIGRATION_GUIDE.md

• Breaking: Remove support for .NET Framework and consolidate on .NET Core LTS versions
• Breaking: Replace internal IoC implementation with Microsoft.Extensions.DependencyInjection
• Breaking: Replace internal logging implementation with Microsoft.Extensions.Logging
• Breaking: Replace internal in-memory caching with Microsoft.Extensions.Caching.Memory
• Breaking: Remove IAmAsyncReadModelFor and made IAmReadModelFor async
• Breaking: Removed EventFlow.Core.AsyncHelper as well as all async wrapper methods
  that used it.
  • IAggregateStore.Load
  • IAggregateStore.Store
  • IAggregateStore.Update
  • ICommandBus.Publish
  • IEventStore.LoadAggregate
  • IEventStore.LoadEvents
  • IEventStore.LoadAllEvents
  • IQueryProcessor.Process
  • IReadModelPopulator.Populate
  • IReadModelPopulator.Purge