RGBtoHDMI CDTV BoM

It is recommended to get the component list from the KiCAD design files themselves, but here is a summarised BoM.

RGBtoHDMI CDTV Main Board

Resistors:

• 4 x 0805 SMT Resistor - 1K
• 1 x 0805 SMT Resistor - 1K5
• 2 x 0805 SMD Resistor 4K7

Caps:

• 1 x 0805 SMD Capacitor - 10uF
• 3 x 0805 SMD Capacitor - 100nF

ICs:

• Xilinx XC9572XL-10VQG44C CPLD

Connectors:

• 2x20pin 2.54mm Pitch Female Header Socket
• FFC 18pin 1mm pitch connector (contacts at bottom)
• 1x4 2.54mm right-angle pin header
• 1x2 2.54mm right-angle pin header

LEDs:

• 3x2x4mm Rectangular LED - Yellow
• 3x2x4mm Rectangular LED - Red

Buttons:

• 3 x 6x6x9mm right-angle push button

Mounts:

• 1 x M2.5x11mm Hex standoff
• 1 x M2.5x5mm pan head screw

(Only 1 mount post is required, but you can have more as per your requirement)

CDTV Denise Breakout Board v1

• FFC 18pin 1mm pitch 30cm flex cable (contacts on same side)
• FFC 18pin 1mm pitch connector (contacts at bottom)
• 2 x 2x12pin 15.24mm Wide DIP Socket
  • or 1 x 2x24pin 15.24mm Wide DIP Socket
  • or 2 x 24pin 2.54mm pitch pin header socket
• 2 x 24pin gold plated 2.54mm pitch pin header

CDTV Denise Breakout Board v2

• FFC 18pin 1mm pitch 30cm flex cable
• FFC 18pin 1mm pitch connector
• 48 x round female pins