A python 3 library to connect various motor systems to a Raspberry pi single board computer

A two-wheel self-balancing robot based on the ATmega2560 micro-controller.

这个库包含了完整的小车控制程序，以及基于树莓派4B从零开始制作树莓派小车的详细步骤方法。制作小车文章地址https://huoyijie.cn/article/3b8281b1e8aa6a1d8bc6718a4256b141/

A robot car developed using Arduino that can operate in 3 modes - Manual, Automatic and Voice. The car is controlled wirelessly via Bluetooth with an android app developed using MIT App Inventor.

my ROS workspace

ESP32 Bluetooth controlled Robot Car

Robot Car realized using Arduino able to follow a path and to detect and avoid obstacles during the way.

WiFi-enabled toy car with ESP32-Cam (AI-Thinker with OV2640) and 2 pairs of motors controlled by L298N-based module. Software includes HTTP server with network & camera configuration.

This project introduces a Line Following Robot that utilizes Arduino technology and features a sophisticated system of 5 sensors. The robot is specifically designed to follow a predefined path or line on the ground, demonstrating the integration of sensor data for precise navigation.

Raspberry Pi Python spy tank robot

A very simple library to help you independently control motors more easily

这是我的寒假课设，只有基础的由蓝牙控制的前进、后退、左转和右转。 硬件有stm32f103c8t6、HC05蓝牙模块、L298N。L298N电机驱动模块也可以换成L9110，这样电机驱动就不用和stm32共地。 学校安排的课程有问题，没有硬件基础，直接让我们学stm32，然后我水了一学期，今年寒假1月1开始临时学，7号就写差不多，所以有瑕疵勿怪，毕竟我的要求也只是能动就行，对我来说只是作业

Manage Raspberry PI devices with Rust. GPIO ports and direct support for L298N circuit motors

A library for the two-wheel drive Arduino robot chassis sold by VKmaker.

STM32 Project | Personal Experiment

The software for a self driving RC car

A simple Arduino-based line-following robot that uses IR sensors and an L298N motor driver to follow a black line on a white surface.

A collection of useful classes for using various sensors, drivers, and controllers with the raspberry pi and a UWP app

ТАЛАС — танк лазерный самоходный