-
Notifications
You must be signed in to change notification settings - Fork 97
V4FMADDPS_V4FNMADDPS
V4FMADDPS / V4FNMADDPS — Packed Single-Precision Floating-Point Fused Multiply-Add (4-iterations)
Opcode/ Instruction | Op/ En | 64/32 bit Mode Support | CPUID Feature Flag | Description |
EVEX.DDS.512.F2.0F38.W0 9A /r V4FMADDPS zmm1{k1}{z}, zmm2+3, m128 | A | V/V | AVX512_4FMAPS | Multiply packed single-precision floating-point values from source register block indicated by zmm2 by values from m128 and accumulate the result in zmm1. |
EVEX.DDS.512.F2.0F38.W0 AA /r V4FNMADDPS zmm1{k1}{z}, zmm2+3, m128 | A | V/V | AVX512_4FMAPS | Multiply and negate packed single-precision floating-point values from source register block indicated by zmm2 by values from m128 and accumulate the result in zmm1. |
Op/En Tuple Operand 1 Operand 2 Operand 3 Operand 4 |
A Tuple1_4X ModRM:reg (r, w) EVEX.vvvv (r) ModRM:r/m (r) NA |
This instruction computes 4 sequential packed fused single-precision floating-point multiply-add instructions with a sequentially selected memory operand in each of the four steps.
In the above box, the notation of “+3” is used to denote that the instruction accesses 4 source registers based on that operand; sources are consecutive, start in a multiple of 4 boundary, and contain the encoded register operand.
This instruction supports memory fault suppression. The entire memory operand is loaded if any of the 16 lowest significant mask bits is set to 1 or if a “no masking” encoding is used.
The tuple type Tuple1_4X implies that four 32-bit elements (16 bytes) are referenced by the memory operation portion of this instruction.
Rounding is performed at every FMA (fused multiply and add) boundary. Exceptions are also taken sequentially. Pre- and post-computational exceptions of the first FMA take priority over the pre- and post-computational exceptions of the second FMA, etc.
src_reg_id is the 5 bit index of the vector register specified in the instruction as the src1 register.
define NFMA_PS(kl, vl, dest, k1, msrc, regs_loaded, src_base, posneg):
tmpdest ← dest
// reg[] is an array representing the SIMD register file.
FOR j ← 0 to regs_loaded-1:
FOR i ← 0 to kl-1:
IF k1[i] or *no writemask*:
IF posneg = 0:
tmpdest.single[i] ← RoundFPControl_MXCSR(tmpdest.single[i] - reg[src_base + j ].single[i] * msrc.single[j])
ELSE:
tmpdest.single[i] ← RoundFPControl_MXCSR(tmpdest.single[i] + reg[src_base + j ].single[i] * msrc.single[j])
ELSE IF *zeroing*:
tmpdest.single[i] ← 0
dest ← tmpdst
dest[MAX_VL-1:VL] ← 0
V4FMADDPS and V4FNMADDPS dest{k1}, src1, msrc (AVX512)
KL, VL = (16,512)
regs_loaded ← 4
src_base ← src_reg_id & ~3 // for src1 operand
posneg ← 0 if negative form, 1 otherwise
NFMA_PS(kl, vl, dest, k1, msrc, regs_loaded, src_base, posneg)
V4FMADDPS __m512 _mm512_4fmadd_ps( __m512, __m512x4, __m128 *);
V4FMADDPS __m512 _mm512_mask_4fmadd_ps(__m512, __mmask16, __m512x4, __m128 *);
V4FMADDPS __m512 _mm512_maskz_4fmadd_ps(__mmask16, __m512, __m512x4, __m128 *);
V4FNMADDPS __m512 _mm512_4fnmadd_ps(__m512, __m512x4, __m128 *);
V4FNMADDPS __m512 _mm512_mask_4fnmadd_ps(__m512, __mmask16, __m512x4, __m128 *);
V4FNMADDPS __m512 _mm512_maskz_4fnmadd_ps(__mmask16, __m512, __m512x4, __m128 *);
Overflow, Underflow, Invalid, Precision, Denormal.
See Type E2; additionally
#UD If the EVEX broadcast bit is set to 1.
#UD If the MODRM.mod = 0b11.
Source: Intel® Architecture Software Developer's Manual (May 2018)
Generated: 5-6-2018