-
Notifications
You must be signed in to change notification settings - Fork 97
VCOMPRESSPS
VCOMPRESSPS — Store Sparse Packed Single-Precision Floating-Point Values into Dense Memory
Opcode/ Instruction | Op / En | 64/32 bit Mode Support | CPUID Feature Flag | Description |
EVEX.128.66.0F38.W0 8A /r VCOMPRESSPS xmm1/m128 {k1}{z}, xmm2 | A | V/V | AVX512VL AVX512F | Compress packed single-precision floating-point values from xmm2 to xmm1/m128 using writemask k1. |
EVEX.256.66.0F38.W0 8A /r VCOMPRESSPS ymm1/m256 {k1}{z}, ymm2 | A | V/V | AVX512VL AVX512F | Compress packed single-precision floating-point values from ymm2 to ymm1/m256 using writemask k1. |
EVEX.512.66.0F38.W0 8A /r VCOMPRESSPS zmm1/m512 {k1}{z}, zmm2 | A | V/V | AVX512F | Compress packed single-precision floating-point values from zmm2 using control mask k1 to zmm1/m512. |
Op/En | Tuple Type | Operand 1 | Operand 2 | Operand 3 | Operand 4 |
A | Tuple1 Scalar | ModRM:r/m (w) | ModRM:reg (r) | NA | NA |
Compress (stores) up to 16 single-precision floating-point values from the source operand (the second operand) to the destination operand (the first operand). The source operand is a ZMM/YMM/XMM register, the destination operand can be a ZMM/YMM/XMM register or a 512/256/128-bit memory location.
The opmask register k1 selects the active elements (a partial vector or possibly non-contiguous if less than 16 active elements) from the source operand to compress into a contiguous vector. The contiguous vector is written to the destination starting from the low element of the destination operand.
Memory destination version: Only the contiguous vector is written to the destination memory location. EVEX.z must be zero.
Register destination version: If the vector length of the contiguous vector is less than that of the input vector in the source operand, the upper bits of the destination register are unmodified if EVEX.z is not set, otherwise the upper bits are zeroed.
EVEX.vvvv is reserved and must be 1111b otherwise instructions will #UD.
Note that the compressed displacement assumes a pre-scaling (N) corresponding to the size of one single element instead of the size of the full vector.
(KL, VL) = (4, 128), (8, 256), (16, 512)
SIZE ←32
k ← 0
FOR j ← 0 TO KL-1
i ← j * 32
IF k1[j] OR *no writemask*
THEN
DEST[k+SIZE-1:k]← SRC[i+31:i]
k ← k + SIZE
FI;
ENDFOR;
(KL, VL) = (4, 128), (8, 256), (16, 512)
SIZE ←32
k ← 0
FOR j ← 0 TO KL-1
i ← j * 32
IF k1[j] OR *no writemask*
THEN
DEST[k+SIZE-1:k]← SRC[i+31:i]
k ← k + SIZE
FI;
ENDFOR
IF *merging-masking*
THEN *DEST[VL-1:k] remains unchanged*
ELSE DEST[VL-1:k] ← 0
FI
DEST[MAXVL-1:VL] ← 0
VCOMPRESSPS __m512 _mm512_mask_compress_ps( __m512 s, __mmask16 k, __m512 a);
VCOMPRESSPS __m512 _mm512_maskz_compress_ps( __mmask16 k, __m512 a);
VCOMPRESSPS void _mm512_mask_compressstoreu_ps( void * d, __mmask16 k, __m512 a);
VCOMPRESSPS __m256 _mm256_mask_compress_ps( __m256 s, __mmask8 k, __m256 a);
VCOMPRESSPS __m256 _mm256_maskz_compress_ps( __mmask8 k, __m256 a);
VCOMPRESSPS void _mm256_mask_compressstoreu_ps( void * d, __mmask8 k, __m256 a);
VCOMPRESSPS __m128 _mm_mask_compress_ps( __m128 s, __mmask8 k, __m128 a);
VCOMPRESSPS __m128 _mm_maskz_compress_ps( __mmask8 k, __m128 a);
VCOMPRESSPS void _mm_mask_compressstoreu_ps( void * d, __mmask8 k, __m128 a);
None
EVEX-encoded instructions, see Exceptions Type E4.nb.
#UD If EVEX.vvvv != 1111B.
Source: Intel® Architecture Software Developer's Manual (May 2018)
Generated: 5-6-2018